160
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Determining elastic and shear moduli of cold-formed steel at elevated temperatures using a new sonic resonance method

, , &
Pages 1-13 | Received 23 Feb 2013, Accepted 07 Jul 2013, Published online: 20 Sep 2013

References

  • BlackJT, DeGarmoPE, KohserRA. Materials and processes in manufacturing. Upper Saddle River, NJ: Prentic Hall Inc.; 1997.
  • AhnB, LeeSS, MinUS. Elastic constants determination of thin cold-rolled stainless steels by dynamic elastic modulus measurements. J Mater Sci. 1998;33:687–692.
  • KankanamgeND, MahendranM. Mechanical properties of cold-formed steels at elevated temperatures. Thin Wall Struct. 2011;49:26–44.
  • Mecozzi E, Zhao B. Development of stress–strain relationships of cold-formed lightweight steel at elevated temperatures. Eurosteel Conference, Maastricht, The Netherlands ; 2005.
  • ChenJ, YoungB. Experimental investigation of cold-formed steel material at elevated temperatures. Thin Wall Struct. 2007;45:96–110.
  • LeeJ, MahendranM, MakelainenP. Prediction of mechanical properties of light gauge steels at elevated temperatures. J Construct Steel Res. 2003;15:17–32.
  • RanawakaT, MahendranM. Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures. Fire Saf. J. 2009;44:219–229.
  • RasmussenKJR. Full-range stress–strain curves for stainless steel alloys. J Construct Steel Res. 2003;59:47–61.
  • JungSS, KimYT, LeeYB, ShinSH, KimD, KimHC. Measurement of the resonance frequency, the loss factor, and the dynamic young's modulus in structural steel and polycarbonate by using an acoustic velocity sensor. J Korean Phys Soc. 2006;49:1961–1966.
  • Dynamic Young's modulus, shear modulus, and Poisson's ratio by sonic resonance. ASTM-E 1875-08; 2002 [Accessed 20 February 2013]. Available from http://www.astm.org/Standards/E1875.htm.
  • Standard specification for steel sheet, carbon, metallic- and nonmetallic-coated for cold-formed framing members. ASTM, A1003/A1003M-13 [Accessed 20 February 2013]. Available from http://www.astm.org/-Standards/A1003.htm.
  • BenhamPP, WarnockFV. Mechanics of solids and strengths of materials. London: Pitman Publishing; 1965.
  • BrockenbroughR, MerrittF. Structural steel designer's handbook. New York: McGraw Hill Professional; 2011.
  • Standard test methods and definitions for mechanical testing of steel products. ASTM, A370-12a [Accessed 20 February 2013]. Available from http://www.astm.org/Standards/A370.htm.
  • Standards measurements and testing project no. SMT4-CT97-2165, UNCERT COP13 2000 [Accessed 20 February 2013]. Available from http://www.npl.co.uk/science-technology/engineered-materialsresearch/mechanical/uncertainties-in-mechanical-testing-%28uncert%29.
  • BednarskiP, BialoD, BrostowW, CzechowskiK, PolowskiW, RusekP, TobolaD. Improvement of tribological properties of metal matrix composites by means of slide burnishing. Mater Sci. 2013;19:to be published.
  • BrostowW, CzechowskiK, PolowskiK, RusekP, TobolaD, WronskaI. Slide diamond burnishing of tool steel with adhesive coatings and diffusion layers. Mater Res Innov. 2013;17:1–9.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.