278
Views
10
CrossRef citations to date
0
Altmetric
Original Articles

Non-destructive testing investigation of gaps in thin Glare laminates

ORCID Icon, ORCID Icon, ORCID Icon &
Pages 17-34 | Received 18 Jan 2019, Accepted 21 Oct 2019, Published online: 29 Oct 2019

References

  • Vlot A, Gunnink JW. Fibre metal laminates an introduction. Netherlands: Kluwer Academic Publishers; 2001.
  • Beumler T. Flying GLARE [Ph.D. dissertation]. Delft University of Technology; 2004.
  • Alderliesten R, Homan JJ. Fatigue and damage tolerance issues of Glare in aircraft structures. Int J Fatigue. 2006;28:1116–1123.
  • Roebroeks GHJJ. Fibre-metal laminates. Recent developments and applications. Int J Fatigue. 1994;16(1):33–42.
  • Bienias J, Jakubczak P. Impact damage growth in carbon fibre aluminium laminates. Compos Struct. 2017;172:147–154.
  • van Hengel C. Design for value of FML components: example fuselage panels. Aeromat. 2016:41906.
  • Apmann H, Busse M, Du JY, et al. Automated manufacture of fibre metal laminates to achieve high rate of production. Lightweight Des. 2017;10:28–33.
  • Perner M, Algermissen S, Keimer R, et al. Avoiding defects in manufacturing processes: a review for automated CFRP production. Robot Cim-Int Manuf. 2016;38:82–92.
  • Coenen RAM Design of a quality assurance system for structural laminates [Ph.D. dissertation]. Delft University of Technology; 1998.
  • Nagy PB. Ultrasonic detection of kissing bonds at adhesive interfaces. J Adhes Sci Technol. 1991;5(8):619–630.
  • Yurgartis SW. Measurement of small angle fiber misalignments in continuous fiber composites. Compos Sci Technol. 1987;30:279–293.
  • Sinke J. Manufacturing of GLARE parts and structures. Appl Compos Mater. 2003;10(4–5):293–305.
  • Sinke J. Some inspection methods for quality control and in-service inspection of GLARE. Appl Compos Mater. 2003;10:277–291.
  • Moriniere FD, Alderliesten RC, Tooski MY, et al. Damage evolution in GLARE fibre-metal laminate under repeated low-velocity impact tests. Cent Eur J Eng. 2012;2(4):603–611.
  • Nardi D, Abouhamzeh M, Leonard R, et al. Detection and evaluation of pre-preg gaps and overlaps in Glare laminates. Appl Compos Mater. 2018;25(6):1491–1507.
  • Fahr A, Chapman CE, Laliberte JF, et al. Nondestructive evaluation methods for damage assessment in fiber-metal laminates. Polym Composites. 2000;21(4):568–575.
  • Bienias J, Jakubczak P, Majerski K, et al. Methods of ultrasonic testing, as an effective way of estimating durability and diagnosing operational capability of composite laminates used in aerospace industry. Eksploat Niezawodn. 2013;15(3):284–289.
  • Czechowski L, Gliszczyński A, Bieniaś J, et al. Failure of GFRP channel section beams subjected to bending - numerical and experimental investigations. Compos Part B-Eng. 2017;111:112–123.
  • Mania RJ, Kolakowski Z, Bienias J, et al. Comparative study of FML profiles buckling and postbuckling behaviour under axial loading. Compos Struct. 2015;134:216–225.
  • Bisle W, Meier T, Mueller S, et al. In-service inspection concept for GLARE - an example for the use of new UT array inspection system. 9th European Conference on NDT, Berlin, Germany; 2006.
  • Demcenko A, Zukauskas E, Kazys R, et al. Interaction of the a0 lamb wave mode with a de-lamination type defect in GLARE3-3/2 composite material. Acta Acust United Acust. 2006;92:540–548.
  • Rosalie SC, Vaughan M, Bremner A, et al. Variation in the group velocity of lamb waves as a tool for the detection of delamination in GLARE aluminium plate-like structures. Compos Struct. 2004;66:77–86.
  • Ibarra-Castanedo C, Avdelidis NP, Grinzato EG, et al. Delamination detection and impact damage assessment of GLARE by active thermography. Int J Mater Product Technol. 2011;41.
  • Steinchen W, Yang L, Kupfer G, et al. Non-destructive testing of aerospace composite materials using digital shearography. Proc Inst Mech Eng Part G. 1998;212:21–30.
  • Drinkwater BW, Wilcox PD. Ultrasonic arrays for non-destructive evaluation: a review. NDT&E. 2006;39(7):525–541.
  • Felice MV, Velichko A, Wilcox PD. Accurate depth measurement of small surface-breaking cracks using an ultrasonic array post-processing technique. NDT E Int. 2014;68:105–112.
  • Elsherbini YM, Hoa SV. Experimental and numerical investigation of the effect of gaps on fatigue behaviour of unidirectional carbon/epoxy automated fiber placement laminates. J Compos Mater. 2017;51(6):759–772.
  • Sawicki A, Minguet P The effect of intraply overlaps and gaps upon the compression strength of composite laminate. 39th AIAA structural, dynamics, & materials conference. Lomg Beach, CA; 1998, 744–754.
  • Croft K, Lessard L, Pasini D, et al. Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates. Compos Part A Appl S. 2011;42(5):484–491.
  • Falco O, Mayugo J, Lopes CS, et al. Variable-stiffness composite panels: defect tolerance under in-plane tensile loading. Compos Part A Appl S. 2014;63:21–31.
  • Fayazbakhsh K, Arian NM, Paini D, et al. The effect of gaps and overlaps on the in-plane stiffness and buckling load of variable stiffness laminates made by automated fiber placement. Proceedings of 15th European Conference on Composite Materials, Venice, Italy; 2012.
  • Li X, Hallet SR, Wisnom MR. Modelling the effect of gaps and overlaps in automated fibre placement (AFP)-manufactured laminates. Sci Eng Compos Mater. 2015;22(2):115–129.
  • Wang EL, Gutowski TG. Laps and gaps in thermoplastic composite processing. Compos Manuf. 1991;2(2):69–78.
  • Abouhamzeh M, Nardi D, Leonard R, et al. Effect of prepreg gaps and overlpas on mechanical properties of fibre metal laminates. Compos Part A Appl Sci Manuf. 2018;114:258–268.
  • Ucan H, Apmann H, Grassl G, et al. Production technologies for lightweight structures made from fibre-metal laminates in aircraft fuselages. CEAS Aeronaut J. 2018;9:1–11.
  • Bienias J, Jakubczak P, Surowska B, et al. Low-energy impact behaviour and damage characterization of carbon fibre reinforced polymer and aluminium hybrid laminates. Arch Civ Mech Eng. 2015;15(4):925–932.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.