Development of dual-main excitation mechanism modes electromagnet EMAT for testing ferromagnetic materials

References

• Dobmann G, Ning, MK, Theiner W, et al. Nondestructive characterization of materials (ultrasonic and micromagnetic techniques) for strength and toughness prediction and the detection of early creep damage. Nucl Eng Des. 1995;157(1–2):137–158. doi: 10.1016/0029-5493(95)00992-L
   Web of Science ®Google Scholar
• Sophian A, Tian, GY, Fan M. Pulsed eddy current non-destructive testing and evaluation: a review. Chin J Mech Eng. 2017;30(3):500–514. doi: 10.1007/s10033-017-0122-4
   Web of Science ®Google Scholar
• Liu Z, Zhao J, Wu B, et al. Configuration optimization of magnetostrictive transducers for longitudinal guided wave inspection in seven-wire steel strands. NdT&E Int. 2010;43(6):484–492. doi: 10.1016/j.ndteint.2010.05.003
   Web of Science ®Google Scholar
• Liu Z, Wu B, He C, et al. A new transducer for torsional guided wave generation and defect detection. Insight Non-Destr Test Cond Monit. 2017;49(1):41–43. doi: 10.1784/insi.2007.49.1.41
   Google Scholar
• Liu Z, Yu H, Fan J, et al. Baseline-free delamination inspection in composite plates by synthesizing non-contact air-coupled lamb wave scan method and virtual time reversal algorithm. Smart Mater Struct. 2015;24(4):045014. (15pp). doi: 10.1088/0964-1726/24/4/045014
   Web of Science ®Google Scholar
• Liu Z, Chen H, Sun K, et al. Full non-contact laser-based lamb waves phased array inspection of aluminum plate. J Visual-Japan. 2018;21(5):751–761. doi: 10.1007/s12650-018-0497-z
   Web of Science ®Google Scholar
• Hirao M, Ogi H. Electromagnetic acoustic transducers: noncontacting ultrasonic measurements using EMATs. Springer; 2017. p. 17–31.
   Google Scholar
• Jian X, Dixon S, Edwards RS, et al. Coupling mechanism of an EMAT. Ultrason. 2006;44:e653–e656. doi: 10.1016/j.ultras.2006.05.123
   Web of Science ®Google Scholar
• Moran TJ, Panos RM. Electromagnetic generation of electronically teered ultrasonic bulk waves. J Appl Phys. 1976;47(5):2225–2227. doi: 10.1063/1.322872
   Web of Science ®Google Scholar
• Ren W, Xu K, Dixon S, et al. A study of magnetostriction mechanism of EMA T on low-carbon steel at high temperature. NdT&E Int. 2019;101:34–43. doi: 10.1016/j.ndteint.2018.10.001
   Web of Science ®Google Scholar
• Ashigwuike EC, Ushie OJ, Mackay R et al. A study of the transduction mechanisms of electromagnetic acoustic transducers (EMATs) on pipe steel materials. Sensors Actuat A - Phys. 2015;229:154–165. doi: 10.1016/j.sna.2015.03.034
   Web of Science ®Google Scholar
• Xie, S, Tian, M, Xiao, P, et al. A hybrid nondestructive testing method of pulsed eddy current testing and electromagnetic acoustic transducer techniques for simultaneous surface and volumetric defects inspection. NDT E Int. 2017;86:153–163. doi: 10.1016/j.ndteint.2016.12.006
   Web of Science ®Google Scholar
• Rosen M, Lves L, Ridder S, et al. Correlation between ultrasonic and hardness measurements in aged aluminum alloy 2024. Mat Sci Eng. 1985;74(1):1–10. doi: 10.1016/0025-5416(85)90104-1
   Google Scholar
• Zhang X, Uchimoto T, Wu B, et al. Improved dynamic magnetostriction measurement method based on M-EMAT for the characterization of residual strain. Int J Appl Electrom. 2020;64(1–4):299–306. doi: 10.3233/JAE-209334
   Web of Science ®Google Scholar
• Li, KY Li L, Wang P, et al. A fast and non-destructive method to evaluate yield strength of cold-rolled steel via incremental permeability. J Magn Magn Mater. 2020;498:16087. (7pp). doi: 10.1016/j.jmmm.2019.166087
   Web of Science ®Google Scholar
• Wang P, Zhang Y, Yao ET, et al. Method of measuring the mechanical properties of ferromagnetic materials based on magnetostrictive EMAT characteristic parameters. Measurement. 2021;168(1):109187. (11pp). doi: 10.1016/j.measurement.2020.108187
   Google Scholar
• Wang P, Li, Y R, Chady T, et al. Method of measuring the mechanical properties of ferromagnetic materials based on magnetostriction EMAT and sound velocity. J Magn Magn Mater. 2022;555(1):169375. (10pp). doi: 10.1016/j.jmmm.2022.169375
   Google Scholar
• Liu, Z H, Zhao X, Pei N, et al. Numerical decoupling study of EMAT testing signal for ferromagnetic materials. IEEE Sens J. 2020;20(7):3476–3486. doi: 10.1109/JSEN.2019.2959601
   Web of Science ®Google Scholar
• Zhao X, Liu, ZH Gong Y, et al. Performance degradation detection of 12CrMoV steel by magneto-acoustic compound inspection method. NDT E Int. 2021;124:102525. (11pp). doi: 10.1016/j.ndteint.2021.102525
   Web of Science ®Google Scholar
• Guo, YH, Liu Z H, Zhao X, et al. Detection and evaluation of thermal aging brittleness of heat-resistant steel using magneto-acoustic compound techniques, Nondestruct. Test Eva. doi: 10.1080/10589759.2023.2221770
   Google Scholar
• Zhao X, Liu Z H, Gong Y, et al. An advanced magnetoacoustic compound inspection method of high-order mode EMAT. IEEE Sens J. 2021;22(1):229–239. doi: 10.1109/JSEN.2021.3130121
   Web of Science ®Google Scholar
• Ogi H. Field dependence of coupling efficiency between electromagnetic field and ultrasonic bulk waves. J Appl Phys. 1997;82(8):3940–3949. doi: 10.1063/1.365701
   Web of Science ®Google Scholar
• Wang ZC, Yuan W. COMSOR based shear wave EMAT optimization for thickness measurement of continuous casting shell. Tech Acoust. 2018;37(3): 237–242. in chinese.
   Google Scholar
• Guan S, He X, Wang X, et al. Multiphysics simulation of the resistance spot welding detection using electromagnetic ultrasonic transverse wave. Int J Adv Manuf Tech. 2020;110(1–2):79–88. doi: 10.1007/s00170-020-05809-6
   Web of Science ®Google Scholar
• Wu YT, Wu YX. Orthogonal optimal design method for spiral coil EMAT considering lift-off effect: a case study. IEEE Access. 2021;9:22062–22070. doi: 10.1109/ACCESS.2021.3053343
   Google Scholar