References
- Balci, C., and N. Bilgin. 2007. Correlative Study of Linear Small and Full-scale Rock Cutting Tests to Select Mechanized Excavation Machines. International Journal of Rock Mechanics and Mining Science 44 (3): 468–476. doi:10.1016/j.ijrmms.2006.09.001.
- Bilgin, N., T. Dincer, H. Copur, and M. Erdogan. 2004. Some Geological and Geotechnical Factors Affecting the Performance of a Roadheader in an Inclined Tunnel. Tunneling and Underground Space Technology 19 (6): 629–636. doi:10.1016/j.tust.2004.04.004.
- Block, G., and H. Jin. 2009. Role of failure mode on rock cutting dynamics. SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, October 4–7. doi:10.2118/124870-MS.
- Cardu, M., and P. Oreste. 2012. Technical-operational Comparison between Trench-cutters and Clam Excavators for Concrete Diaphragm Construction in Underground Works at Shallow Depths. International Journal of Mining Reclamation and Environment 26 (3): 217–232. doi:10.1080/17480930.2012.712819.
- Cardu, M., and P. Oreste. 2014. Productivity and Working Costs of Modern Trench-cutters for the Construction of Concrete Diaphragms in an Urban Environment. International Journal of Mining Reclamation and Environment 28 (2): 118–132. doi:10.1080/17480930.2013.795340.
- Cho, J. W., S. Jeon, H. Y. Jeong, and S. H. Chang. 2013. Evaluation of Cutting Efficiency during TBM Disc Cutter Excavation Within a Korean Granitic Rock Using Linear-cutting-machine Testing and Photogrammetric Measurement. Tunneling and Underground Space Technology 35: 37–54. doi:10.1016/j.tust.2012.08.006.
- Darling, P. 2011. Sme Mining Engineering Handbook. Englewood, CO: Society for Mining Metallurgy.
- Detournay, E., and P. Defourny. 1992. A Phenomenological Model of the Drilling Action of Drag Bits. International Journal of Rock Mechanics and Mining Science 29 (1): 13–23. doi:10.1016/0148-9062(92)91041-3.
- Detournay, E., T. Richard, and M. Shepherd. 2008. Drilling Response of Drag Bits: Theory and Experiment. International Journal of Rock Mechanics and Mining Science 45 (8): 1347–1360. doi:10.1016/j.ijrmms.2008.01.010.
- Evans, I. 1965. The Force Required to Cut Coal with Blunt Wedges. International Journal of Rock Mechanics and Mining Science 2 (1): 1–12. doi:10.1016/0148-9062(65)90018-5.
- Goktan, R. M. 1997. A suggested improvement on Evans’ cutting theory for conical bits. In Proceedings of the Fourth International Symposium on Mine Mechanization Automation, vol. 1 (A4). Brisbane, Australia, 57–61.
- Gray, K. E., F. Armstrong, and C. Gatlin. 1962. Two-dimensional Study of Rock Breakage in Drag-bit Drilling at Atmospheric Pressure. Journal of Petroleum Technology 14 (1): 95–98.
- Gunes Yilmaz, N., M. Yurdakul, and R. M. Goktan. 2007. Prediction of Radial Bit Cutting Force in High-strength Rocks Using Multiple Linear Regression Analysis. International Journal of Rock Mechanics and Mining Science 44 (6): 962–970. doi:10.1016/j.ijrmms.2007.02.005.
- Hars, E. 2006. Zum Querkraftwiderstand von Stahl- und Spannbetonträgern mit dünnen Stegen. PhD thesis, École Polytechnique Fédérale De Lausanne (in German).
- Hoek, E. 2001. Rock Mass Properties for Underground Mines. In Underground Mining Methods: Engineering Fundamentals and International Case Studies, ed. Hustrulid WA, Bullock RL, 467–474. Litleton, Colorado: Society for Mining, Metallurgy, and Exploration (SME).
- Hossain, M. E., and A. A. Al-Majed. 2015. Fundamentals of Sustainable Drilling Engineering. Hoboken, NJ: John Wiley & Sons.
- Lepique, M. 2008. Empfehlung nr. 10 Des Arbeitskreises 3.3 Versuchstechnik Fels Der Deutschen Gesellschaft Für Geotechnik e. V.: Indirekter Zugversuch an Gesteinsproben – Spaltzugversuch. Bautechnik 85 (9): 623–627. doi:10.1002/bate.200810048. (in German).
- Li, Z., and K. Itakura. 2012. An Analytical Drilling Model of Drag Bits for Evaluation of Rock Strength. Soils and Foundations 52 (2): 216–227. doi:10.1016/j.sandf.2012.02.002.
- Merchant, M. E. 1945. Mechanics of the Metal Cutting Process. Journal of Applied Physics 16 (5): 267. doi:10.1063/1.1707586.
- Miedema, S. A. 2014. The Delft Sand, Clay & Rock Cutting Model. Delft: IOS Press.
- Mutschler, T. 2004. Neufassung Der Empfehlung nr. 1 Des Arbeitskreises Versuchstechnik Fels Der Deutschen Gesellschaft Für Geotechnik e. V.: Einaxiale Druckversuche an Zylindrischen Gesteinsprüfkörpern. Bautechnik 81 (10): 825–834. doi:10.1002/bate.200490194.
- Nishimatsu, Y. 1972. The Mechanics of Rock Cutting. International Journal of Rock Mechanics and Mining Science 9 (2): 261–270. doi:10.1016/0148-9062(72)90027-7.
- Roxborough, F. 1987. The Role of Some Basic Rock Properties in Assessing Cuttability. Seminar on Tunnels - Wholly Engineered Structures. Canberra, Australia: AFCC, 1–21.
- Spagnoli, G., and L. Weixler. 2013. Support for Offshore Monopile Installation through the Trench Cutter Technology. International Journal of Maritime Engineering 155 (A3): 131–140. doi:10.3940/rina.ijme.13.a3.259.
- Spagnoli, G., A. Bi, and L. Weixler. 2014. Trench cutter Case Histories and their Possible Application for Offshore Piles as Relieve Drilling. Geotechnical and Geological Engineering 32 (3): 713–724. doi:10.1007/s10706-014-9747-6.
- Spagnoli, G., S. A. Miedema, C. Herrmann, J. Rongau, L. Weixler, and J. Denegre. 2016. Preliminary Design of a Trench Cutter System for Deep-sea Mining Applications Under Hyperbaric Conditions. IEEE Journal of Oceanic Engineering 41 (4): 930–943. doi:10.1109/JOE.2015.2497884.
- Spagnoli, G., C. Bosco, and P. Oreste. 2017a. The Influence of the Rake Angle on the Excavation Energy in a Sandstone. Geotechnique Letters 7 (1): 30–35. doi:10.1680/jgele.16.00128.
- Spagnoli, G., C. Bosco, and P. Oreste. 2017b. Geotechnical and Machinery Properties Influencing the Offshore Pile Drillability. Marine Georesources and Geotechnology 35 (2): 266–274. doi:10.1080/1064119X.2016.1155189.
- Stuyts, B., D. Cathie, C. Guyatt, P. Boyde, and J. Pyrah. 2014. Mechanical Trencher Modelling in Hard Ground: State-of-the-art. In Frontiers in Offshore Geotechnics III, ed. Meyer V, 441–446. Boca Raton: CRC Press.
- Su, O. 2013. Simulation of Rock Cutting Mechanism and Characterization of Failure Mode in PFC3D. In Rock Characterisation, Modelling and Engineering Design Methods, ed. Feng, XT, Hudson JA, Tan F, 369–372. Boca Raton: CRC Press.
- Swain, G. F. 1928. Festigkeitslehre. Berlin, Germany: Springer.