Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models

References

• AASHTO. 2010. LRFD Bridge Design Specifications. 5th ed. Washington, DC: American Association of State Highway and Transportation Officials (AASHTO).
   Google Scholar
• AASHTO. 2012. LRFD Bridge Design Specifications. 6th ed. Washington, DC: American Association of State Highway and Transportation Officials (AASHTO).
   Google Scholar
• AASHTO. 2017. LRFD Bridge Design Specifications. 8th ed. Washington, DC: American Association of State Highway and Transportation Officials (AASHTO).
   Google Scholar
• Allen, T. M., A. S. Nowak, and R. J. Bathurst. 2005. Calibration to Determine Load and Resistance Factors for Geotechnical and Structural Design. Circular E-C079. Washington, DC: Transportation Research Board, National Research Council.
   Google Scholar
• Baecher, G. B., and J. T. Christian. 2003. Reliability and Statistics in Geotechnical Engineering. Chichester, UK: Wiley.
   Google Scholar
• Barret, C., J. Chinchiolo, C. Lobato, and N. Beard. 2011. Case Studies in Roadway Landslide Repair Along Sides, River Banks, Bluffs, and Other Sensitive Riparian Areas. Paper presented at the 62nd highway geology symposium, July 2011, USA, 1–16. http://morsky.ca/wp-content/uploads/2012/11/Case-Studies-in-Roadway-Landslide-Repair-along-Stream-Sides-River-Banks-Bluffs-and-other-Sensitive-Riparian-Areas.pdf
   Google Scholar
• Basheer, I. A., and M. Hajmeer. 2000. Artificial Neural Networks: Fundamentals, Computing, Design, and Application. Journal of Microbiological Methods 43 (1): 3–31. doi: 10.1016/S0167-7012(00)00201-3.
   PubMed Web of Science ®Google Scholar
• Bathurst, R. J., B. Huang, and T. M. Allen. 2012. LRFD Calibration of the Ultimate Pullout Limit State for Geogrid Reinforced Soil Retaining Walls. International Journal of Geomechanics 5 (3–4): 218–228.
   Google Scholar
• Bathurst, R. J., S. Javankhoshdel, and T. M. Allen. 2017. LRFD Calibration of Simple Soil-Structure Limit States Considering Method Bias and Design Parameter Variability. Journal of Geotechnical and Geoenvironmental Engineering 143 (9): 04017053. doi: 10.1061/(ASCE)GT.1943-5606.0001735.
   Web of Science ®Google Scholar
• Benbouras, M. A., R. K. Mitiche, H. Zedira, A. I. Petrisor, N. Mezouar, and F. Debiche. 2018. A New Approach to Predict the Compression Index Using Artificial Intelligence Methods. Marine Georesources & Geotechnology. doi: 10.1080/1064119X.2018.1484533.
   Web of Science ®Google Scholar
• Byrne, R. J., D. Cotton, J. Porterfield, C. Wolschlag, and G. Ueblacker. 1998. Manual for Design and Construction Monitoring of Soil Nail Wall. U.S. Department of Transportation Publication no. FHWA-SA-96-069R. Washington, DC: Federal Highway Administration, FHWA.
   Google Scholar
• Cai, G. J., S. Y. Liu, A. J. Puppala, and L. Tong. Y. 2015. Identification of Soil Strata Based on General Regression Neural Network Model from CPTU Data. Marine Georesources & Geotechnology 33 (3): 229–238. doi: 10.1080/1064119X.2013.843046.
   Web of Science ®Google Scholar
• California Coastal Commission. 2017. Staff Report Regular Calendar. Application File, 2-16-0684, 87. https://documents.coastal.ca.gov/reports/2017/3/w12b-3-2017.pdf
   Google Scholar
• Canadian Standards Association (CSA). 2014. Canadian Highway Bridge Design Code. CAN/CSA-S6-14. Mississauga, Ontario, Canada.
   Google Scholar
• Ching, J. Y., and K. K. Phoon. 2011. A Quantile-Based Approach for Calibrating Reliability-Based Partial Factors. Structural Safety 33 (4–5): 275–85. − doi: 10.1016/j.strusafe.2011.04.002.
   Web of Science ®Google Scholar
• Demuth, H. B., M. H. Beale, O. De Jess, and M. T. Hagan. 2014. Neural Network Design. Stillwater, OK: Martin Hagan Publisher.
   Google Scholar
• DeVries, B. J., and X. Yu. 2016. Calibration of Pullout Resistance Factors Using Survival Analysis for Soil Nails in North Texas. Journal of Infrastructure Systems 22 (2): 04016003. LRFD J doi: 10.1061/(ASCE)IS.1943-555X.0000286.
   Web of Science ®Google Scholar
• Dithinde, M., K. K. Phoon, M. De Wet, and J. V. Retief. 2011. Of Model Uncertainty in the Static Pile Design Formula. Journal of Geotechnical and Geoenvironmental Engineering 137 (1): 70–85. Characterisation − doi: 10.1061/(ASCE)GT.1943-5606.0000401.
   Web of Science ®Google Scholar
• European Committee for Standardization (CEN). 2002. Eurocode: Basis of Structural Design. Ref. No. EN. CEN 1990 (2002). Brussels, Belgium.
   Google Scholar
• Fenton, G. A., and M. Naghibi. 2011. Geotechnical Resistance Factors for Ultimate Limit State Design for Deep Foundations in Frictional Soils. Canadian Geotechnical Journal 48 (11): 1742–117. doi: 10.1139/t11-068.
   Web of Science ®Google Scholar
• Fenton, G. A., D. V. Griffiths, and X. Zhang. 2008. Load and Resistance Factor Design of Shallow Foundations Against Bearing Failure. Canadian Geotechnical Journal 45 (11): 1556–1571. doi: 10.1139/T08-061.
   Web of Science ®Google Scholar
• Fenton, G. A., F. Naghibi, D. Dundas, R. J. Bathurst, and D. V. Griffiths. 2016. Reliability-Based Geotechnical Design in the 2014 Canadian Highway Bridge Design Code. Canadian Geotechnical Journal 53 (2): 236–251. doi: 10.1139/cgj-2015-0158.
   Web of Science ®Google Scholar
• Foye, K. C., R. Salgado, and B. Scott. 2006. Resistance Factors for Use in Shallow Foundation LRFD. Journal of Geotechnical and Geoenvironmental Engineering 132 (9):1208–1218. doi: 10.1061/(ASCE)1090-0241(2006)132:9(1208).
   Web of Science ®Google Scholar
• Geotechnical Engineering Office (GEO). 2008. Geoguide 7— Guide to Soil Nail Design and Construction, GEO, Civil Engineering and Development Department, The Government of the Hong Kong Special Administrative Region. GEO report No. 197. ISBN: 978-962-02-0375-6.
   Google Scholar
• Gong, W. P., C. H. Juang, S. Khoshnevisan, and K. K. Phoon. 2016. R-LRFD: Load and Resistance Factor Design Considering Robustness. Computers and Geotechnics 74 (74): 74–87. (− doi: 10.1016/j.compgeo.2015.12.017.
   Google Scholar
• Griggs, G. B. 2005. California’s Retreating Coastline: Where Do We Go From Here? In California and the World Ocean. 97, eds. Magoon, O. T., Converse, H., Baird, B., et al., Vol. 2. American Society of Civil Engineering, 121–125.
   Google Scholar
• Griggs, G. B., K. Patsch, and L. E. Savoy. 2005. Living with the Changing California Coast. Berkeley, CA: University of California Press.
   Google Scholar
• Han, F., J. Lim, R. Salgado, M. Prezzi, and M. Zaheer. 2015. Load and Resistance Factor Design of Bridge Foundations Accounting for Pile Group–Soil Interaction. Joint Transportation Research program, Publication No. FHWA/IN/JTRP-2015/24. West Lafayette, IN: Purdue University. http://dx.doi.org/10.5703/1288284316009
   Google Scholar
• Haykin, S. 2009. Neural Networks and Learning Machines. 3rd ed. Upper Saddle River, NJ: Pearson Prentice Hall.
   Google Scholar
• Holtz, R. D., W. D. Kovacs, and T. C. Sheahan. 2010. An Introduction to Geotechnical Engineering. 2nd ed. Upper Saddle River, NJ: PEARSON.
   Google Scholar
• International Organization for Standardization (ISO). 2015. General Principles on Reliability of Structures. ISO2394. Geneva, Switzerland 2015.
   Google Scholar
• Kim, D., and R. Salgado. 2012a. Load and Resistance Factors for External Stability Checks of Mechanically Stabilized Earth Walls. Journal of Geotechnical and Geoenvironmental Engineering 138 (3): 241–117. doi: 10.1061/(ASCE)GT.1943-5606.0000595.
   Web of Science ®Google Scholar
• Kim, D., and R. Salgado. 2012b. Load and Resistance Factors for Internal Stability Checks of Mechanically Stabilized Earth Walls. Journal of Geotechnical and Geoenvironmental Engineering 138 (8): 910–117. doi: 10.1061/(ASCE)GT.1943-5606.0000664.
   Web of Science ®Google Scholar
• Kulhawy, F. H., K. K. Phoon, and Y. Wang. 2012. Reliability-Based Design of Foundations-A Modern View. In Geotechnical Engineering State of the Art and Practice: Keynote Lectures from GeoCongress 2012, ASCE, 102–117.
   Google Scholar
• Lazarte, C. A. 2011. Proposed Specifications for LRFD Soil-Nailing Design and Construction. NCHRP Report 701. Washington, DC: Transportation Research Board, National Research Council.
   Google Scholar
• Lazarte, C. A. 2013. Calibration of LRFD-Based Resistance Factors for Soil Nail Pullout. In Paper presented at the ASCE Geo-Congress 2013: Foundation Engineering in the Face of Uncertainty, San Diego, CA, 633 − 644. doi: 10.1061/9780784412763.048
   Google Scholar
• Lazarte, C. A., and G. B. Baecher. 2003. LRFD for Soil Nailing Design and Specifications. In Paper presented at the Proceedings International Workshop on limit state design in geotechnical engineering practice (LSD 2003), eds. K. K. Phoon, Y. Honjo, and R. B. Gilbert. Cambridge, MA. Hackensack, NJ: World Scientific Publishing Co.
   Google Scholar
• Lazarte, C. A., H. Robinson, J. E. Gómez, A. Baxter, A. Cadden, and R. Berg. 2015. Geotechnical Engineering Circular No. 7 Soil Nail Walls—Reference Manual. U.S. Department of Transportation Publication no. FHWA-NHI-14-007. Washington, DC: Federal Highway Administration, FHWA.
   Google Scholar
• Lazarte, C. A., V. Elias, D. Espinoza, and P. J. Sabatini. 2003. Geotechnical Engineering Circular No. 7 Soil Nail Walls. Report FHWA0-IF-03-017. Washington, DC: Federal Highway Administration, FHWA.
   Google Scholar
• Li, D. Q., X. Peng, S. Khoshnevisan, and C. H. Juang. 2017. Calibration of Resistance Factor for Design of Pile Foundations Considering Feasibility Robustness. Computers and Geotechnics 81(1): 229–238. doi: 10.1016/j.compgeo.2016.08.018.
   Web of Science ®Google Scholar
• Lin, P., and J. Liu. 2017. Analysis of Resistance Factors for LRFD of Soil Nail Walls Against External Stability Failures. Acta Geotechnica 12 (1): 157–169. doi: 10.1007/s11440-016-0443-y.
   Web of Science ®Google Scholar
• Lin, P., and R. J. Bathurst. 2018a. Influence of Cross-Correlation Between Nominal Load and Resistance on Reliability-Based Design for Simple Linear Soil-Structure Limit States. Canadian Geotechnical Journal 55 (2): 279–117. doi: 10.1139/cgj-2017-0012.
   Web of Science ®Google Scholar
• Lin, P., and R. J. Bathurst. 2018b. Reliability-Based Internal Limit States Analysis and Design of Soil Nails Using Different Load and Resistance Models. Journal of Geotechnical and Geoenvironmental Engineering, 144(5): 04018022. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001862.
   Google Scholar
• Lin, P., and R. J. Bathurst. 2019. Calibration of Resistance Factors for Load and Resistance Factor Design of Internal Limit States of Soil Nail Walls. Journal of Geotechnical and Geoenvironmental Engineering, 145(1): 04018100.
   Google Scholar
• Lin, P., R. J. Bathurst, S. Javankhoshdel, and J. Liu. 2017a. Statistical Analysis of the Effective Stress Method and Modifications for Prediction of Ultimate Bond Strength of Soil Nails. Acta Geotechnica 12 (1): 171–117. doi: 10.1007/s11440-016-0477-1.
   Web of Science ®Google Scholar
• Lin, P., R. J. Bathurst, and J. Liu. 2017b. Statistical Evaluation of the FHWA Simplified Method and Modifications for Predicting Soil Nail Loads. Journal of Geotechnical and Geoenvironmental Engineering 143 (3): 04016107. (doi: 10.1061/(ASCE)GT.1943-5606.0001614.
   Web of Science ®Google Scholar
• Lin, P., J. Liu, and X. Yuan. 2017c. Reliability Analysis of Soil Nail Walls Against External Failures in Layered Ground. Journal of Geotechnical and Geoenvironmental Engineering 143 (1): 04016077. doi: 10.1061/(ASCE)GT.1943-5606.0001574.
   Web of Science ®Google Scholar
• Liu, H., L. Tang, and P. Lin. 2017. Maximum Likelihood Estimation of Model Uncertainty in Predicting Soil Nail Loads using Default and Modified FHWA Simplified Methods. Mathematical Problems in Engineering 2017: 1. doi: 10.1155/2017/7901918.
   Google Scholar
• Liu, H., L. Tang, and P. Lin. 2018. Estimation of Ultimate Bond Strength for Soil Nails in Clayey Soils using Maximum Likelihood Method. Georisk: Assess Manage Risk Eng Syst Geohaz 12 (3): 190–202. doi: 10.1080/17499518.2017.1422525.
   Web of Science ®Google Scholar
• Lopez, I., L. Aragones, Y. Villacampa, and P. Compan. 2018a. Artificial Neural Network Modelling of Cross-Shore Profile on Sand Beaches: The Coast of the Province of Valencia (Spain). Marine Georesources & Geotechnology 36 (6): 698–708. doi: 10.1080/1064119X.2017.1385666.
   Web of Science ®Google Scholar
• Lopez, I., L. Aragones, and Y. Villacampa. 2018b. Modelling the Cross-Shore Profiles of Sand Beaches Using Artificial Neural Networks. Marine Georesources & Geotechnology doi: 10.1080/1064119X.2018.1482510.
   Web of Science ®Google Scholar
• Maier, H. R., and G. C. Dandy. 2000. Application of Artificial Neural Networks to Forecasting of Surface Water Quality Variables: Issues, Applications and Challenges. In Artificial Neural Networks in Hydrology, 287–309. Dordrecht, Netherlands: Springer.
   Google Scholar
• Melchers, R. E., and A. T. Beck. 2018. Structural Reliability Analysis and Prediction. 3rd ed. Chichester, UK: Wiley.
   Google Scholar
• Mola-Abasi, H., and A. Eslami. 2018. Prediction of Drained Soil Shear Strength Parameters of Marine Deposit from CPTu Data Using GMDH-Type Neural Network. Marine Georesources & Geotechnology. doi: 10.1080/1064119X.2017.1415400.
   Web of Science ®Google Scholar
• Moshfeghi, S., and A. Eslami. 2018. Reliability-Based Assessment of Drilled Displacement Piles Bearing Capacity Using CPT Records. Marine Georesources & Geotechnology doi: 10.1080/1064119X.2018.1448493.
   Web of Science ®Google Scholar
• Moradi, F., H. Bonakdari, O. Kisi, I. Ebtahaj, J. Shiri, and B. Gharabaghi. 2018. Abutment Scour Depth Modeling Using Neuro-Fuzzy-Embedded Techniques. Marine Georesources & Geotechnology doi: 10.1080/1064119X.2017.1420113.
   Web of Science ®Google Scholar
• Muduli, P. K., M. R. Das, P. Samui, and S. K. Das. 2013. Uplift Capacity of Suction Caisson in Clay using Artificial Intelligence Techniques. Marine Georesources & Geotechnology 31 (4): 375–117. doi: 10.1080/1064119X.2012.690827.
   Web of Science ®Google Scholar
• Najafzadeh, M., F. Saberi-Movahed, and S. Sarkamaryan. 2018. NF-GMDH-Based Self-Organized Systems to Predict Bridge Pier Scour Depth Under Debris Flow Effects. Marine Georesouces & Geotechnology 36 (5): 589–602. doi: 10.1080/1064119X.2017.1355944.
   Web of Science ®Google Scholar
• National Cooperative Highway Research Program (NCHRP). 2004. Load and Resistance Factors for Earth Pressures on Bridge Substructures and Retaining Walls. NCHRP, 12-55. Washington, DC: Transportation Research Board, National Research Council.
   Google Scholar
• Natoli, E., B. Admiraal, D. Wit, and A. Yahyaoui. 2017. River Embankment Strengthening by Non-Metallic Nails: Overview on a Permanent Soil Nailing for Flood Protection. Innovative Infrastructure Solutions 2 (1): 53. https://doi.org/10.1007/s41062-017-0101-8.
   Web of Science ®Google Scholar
• Nowak, A. S. 1999. Calibration of LRFD Bridge Design Code. NCHRP report 368. Washington, DC: Transportation Research Board.
   Google Scholar
• Nowak, A. S., and K. R. Collins. 2012. Reliability of Structures. 2nd ed. Boca Raton, FL: CRC Press, Taylor & Francis Group.
   Google Scholar
• Paikowsky, S. G. 2010. LRFD Design and Construction of Shallow Foundations for Highway Bridge Structures. Transportation Research Board Vol. 651
   Google Scholar
• Paikowsky, S. G., B. Birgisson, M. McVay, T. Nguyen, C. Kuo, G. Baecher, B. Ayyub, K. Stenersen, K. O’Malley, L. Chernauskas, and M. O’Neill. 2004. Load and Resistance Factor Design (LRFD) for Deep Foundations. NCHRP report 507, 126. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• Park, H. I. 2011. Development of Neural Network Model to Estimate the Permeability Coefficient of Soils. Marine Georesources & Geotechnology 29 (4): 267–278. doi: 10.1080/1064119X.2011.554963.
   Web of Science ®Google Scholar
• Park, H. I., and C. W. Cho. 2010. Neural Network Model for Predicting the Resistance of Driven Piles. Marine Georesources & Geotechnology 28 (4): 324–117. doi: 10.1080/1064119X.2010.514232.
   Web of Science ®Google Scholar
• Park, J. H., D. Kim, and C. K. Chung. 2012. Implementation of Bayesian Theory on LRFD of Axially Loaded Driven Piles. Computers and Geotechnics 42 (5): 73–80. − doi: 10.1016/j.compgeo.2012.01.002.
   Google Scholar
• Phear, A., C. Dew, B. Ozsoy, N. J. Wharmby, J. Judge, and A. D. Barley. 2005. Soil Nailing − Best Practice Guidance. CIRIA C637. London.
   Google Scholar
• Phoon, K. K., and F. H. Kulhawy. 1999. Characterization of Geotechnical Variability. Canadian Geotechnical Journal 36 (4): 612–117. doi: 10.1139/cgj-36-4-612.
   Web of Science ®Google Scholar
• Phoon, K. K., and F. H. Kulhawy. 2005. Characterisation of Model Uncertainties for Laterally Loaded Rigid Drilled Shafts. Géotechnique 55 (1): 45–54. doi: 10.1680/geot.55.1.45.58593.
   Web of Science ®Google Scholar
• Phoon, K. K., F. H. Kulhawy, and M. D. Grigoriu. 2003. Multiple Resistance Factor Design for Shallow Transmission Line Structure Foundations. Journal of Geotechnical and Geoenvironmental Engineering 129 (9): 807–117. doi: 10.1061/(ASCE)1090-0241(2003)129:9(807).
   Web of Science ®Google Scholar
• Phoon, K. K., J. Y. Ching, and J. R. Chen. 2013. Performance of Reliability-Based Design Code Formats for Foundations in Layered Soils. Computers and Structures 126:100–106. doi: 10.1016/j.compstruc.2012.12.023.
   Google Scholar
• Ravindra, M. K., and T. V. Galambos. 1978. Load and Resistance Factor Design for Steel. ASCE Journal of Structural Divison 104 (ST9): 1337–117.
   Google Scholar
• Shahin, M. A. 2015. A Review of Artificial Intelligence Applications in Shallow Foundations. International Journal of Geotechnical Engineering 9 (1): 49–60. doi: 10.1179/1939787914Y.0000000058.
   Web of Science ®Google Scholar
• Shahin, M. A. 2016. State-of-the-Art Review of Some Artificial Intelligence Applications in Pile Foundations. Geoscience Frontiers 7 (1): 33–44. doi: 10.1016/j.gsf.2014.10.002.
   Web of Science ®Google Scholar
• Shahin, M. A., M. B. Jaksa, and H. R. Maier. 2008. State of the Art of Artificial Neural Networks in Geotechnical Engineering. Electronic Journal of Geotechnical Engineering 8 (1 − 26).
   Google Scholar
• Shin, J. H., and H. I. Park. 2010. Neural Network Formula for Local Scour at Piers Using Field Data. Marine Georesources & Geotechnology 28 (1): 37–48. doi: 10.1080/10641190903263054.
   Web of Science ®Google Scholar
• Sivakumar Babu, G. L., and V. P. Singh. 2011. Reliability-Based Load and Resistance Factors for Soil-Nail Walls. Canadian Geotechnical Journal 48 (6): 915–117. doi: 10.1139/t11-005.
   Web of Science ®Google Scholar
• Transportation Research Board. 1999. Use of Artificial Neural Networks in Geomechanical and Pavement Systems. Transportation Research Circular, December (E-C012), 1–18.
   Google Scholar
• Yuan, J., and P. Lin. 2018. Reliability Analysis of Soil Nail Internal Limit States using Default FHWA Load and Resistance Models. Marine Georesources & Geotechnology doi: 10.1080/1064119X.2018.1489920.
   Web of Science ®Google Scholar
• Zelo, I., H. Shipman, and J. Brennan. 2000. Alternative Bank Protection Methods for Puget Sound Shorelines. Paper presented at the Shorelands and Environmental Assistance Program. Washington, DC: Department of Ecology.
   Google Scholar
• Zevgolis, I. E., and Z. A. Daffas. 2018. System Reliability Assessment of Soil Nail Walls. Computers and Geotechnis 98 (6): 232–242. doi: 10.1016/j.compgeo.2017.10.020.
   Google Scholar