References
- Åhnberg, H. 2007. “On Yield Stresses and the Influence of Curing Stresses on Stress Paths and Strength Measured in Triaxial Testing of Stabilized Soils.” Canadian Geotechnical Journal 44 (1): 54–66. doi:https://doi.org/10.1139/t06-096.
- ASTM D2487-11. 2011. Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). West Conshohocken, PA: ASTM International
- ASTM D2974-14. 2014a. Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils. West Conshohocken, PA: ASTM International,
- ASTM D4318-17. 2017. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. West Conshohocken, PA: ASTM International,
- ASTM D4972-13. 2013. Standard Test Method for pH of Soils. West Conshohocken, PA: ASTM International
- ASTM D6276-19. 2019. Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization. West Conshohocken, PA: ASTM International
- ASTM D854-14. 2014b. Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. West Conshohocken, PA: ASTM International,
- Budhu, M. 2015. Soil Mechanics Fundamentals. Hoboken, NJ: John Wiley & Sons.
- Casagrande, A., and R. E. Fadum. 1940. “Notes on soil testing for engineering purposes.” In Soil Mechanics Series, vol. 8. Graduate School of Engineering, Harvard University, Cambridge, Massachuset.
- Consoli, N., G. Rotta, and P. Prietto. 2000. “Influence of Curing under Stress on the Triaxial Response of Cemented Soils.” Géotechnique 50 (1): 99–105. doi:https://doi.org/10.1680/geot.2000.50.1.99.
- Cui, L., and M. Fall. 2017. “Multiphysics Model for Consolidation Behavior of Cemented Paste Backfill.” International Journal of Geomechanics 17 (3): 04016077. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0000743.
- Federico, A., C. Vitone, and A. Murianni. 2015. “On the Mechanical Behaviour of Dredged Submarine Clayey Sediments Stabilized with Lime or Cement.” Canadian Geotechnical Journal 52 (12): 2030–2040. doi:https://doi.org/10.1139/cgj-2015-0086.
- He, X., Y. Chen, X. Tan, S. Wang, and L. Liu. 2020a. “Determining the Water Content and Void Ratio of Cement-Treated Dredged Soil from the Hydration Degree of Cement.” Engineering Geology 279: 105892. doi:https://doi.org/10.1016/j.enggeo.2020.105892.
- He, X., Y. Chen, Y. Wan, L. Liu, and Q. Xue. 2020b. “Effect of Curing Stress on Compression Behavior of Cement-Treated Dredged Sediment.” International Journal of Geomechanics 20 (11): 04020204. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0001857.
- Horpibulsuk, S., R. Rachan, A. Chinkulkijniwat, Y. Raksachon, and A. Suddeepong. 2010. “Analysis of Strength Development in Cement-Stabilized Silty Clay from Microstructural Considerations.” Construction and Building Materials 24 (10): 2011–2021. doi:https://doi.org/10.1016/j.conbuildmat.2010.03.011.
- Hurel, C., M. Taneez, A. V. Ghirardini, and G. Libralato. 2017. “Effects of Mineral Amendments on Trace Elements Leaching from Pre-Treated Marine Sediment after Simulated Rainfall Events.” Environmental Pollution (Barking, Essex : 1987) 220 (Pt A): 364–374. doi:https://doi.org/10.1016/j.envpol.2016.09.072.
- Jongpradist, P., P. Jamsawang, and W. Kongkitkul. 2019. “Equivalent Void Ratio Controlling the Mechanical Properties of Cementitious Material-Clay Mixtures with High Water Content.” Marine Georesources & Geotechnology 37 (10): 1151–1162. doi:https://doi.org/10.1080/1064119X.2018.1539534.
- Jongpradist, P., S. Youwai, P. Manorat, W. Kongkitkul, and S. Chucheepsakul. 2011. “Influence of Curing Stress on One-Dimensional Yielding of Cement-Admixed Bangkok Clay at High Water Content.” Soils and Foundations 51 (2): 351–357. doi:https://doi.org/10.3208/sandf.51.351.
- Kalantari, B., and A. Prasad. 2014. “A Study of the Effect of Various Curing Techniques on the Strength of Stabilized Peat.” Transportation Geotechnics 1 (3): 119–128. doi:https://doi.org/10.1016/j.trgeo.2014.06.002.
- Khalid, U., C. Liao, G-l Ye, and S. K. Yadav. 2018. “Sustainable Improvement of Soft Marine Clay Using Low Cement Content: A Multi-Scale Experimental Investigation.” Construction and Building Materials 191: 469–480. doi:https://doi.org/10.1016/j.conbuildmat.2018.10.034.
- Lang, L.,. B. Chen, and B. Chen. 2020a. “Strength Evolutions of Varying Water Content-Dredged Sludge Stabilized with Alkali-Activated Ground Granulated Blast-Furnace Slag.” Construction and Building Materials 275: 122111. doi:https://doi.org/10.1016/j.conbuildmat.2020.122111.
- Lang, L.,. C. Song, L. Xue, and B. Chen. 2020b. “Effectiveness of Waste Steel Slag Powder on the Strength Development and Associated Micro-Mechanisms of Cement-Stabilized Dredged Sludge.” Construction and Building Materials 240: 117975. doi:https://doi.org/10.1016/j.conbuildmat.2019.117975.
- Lin, F., and C. Meyer. 2009. “Hydration Kinetics Modeling of Portland Cement considering the Effects of Curing Temperature and Applied Pressure.” Cement and Concrete Research 39 (4): 255–265. doi:https://doi.org/10.1016/j.cemconres.2009.01.014.
- Li, J., Y. Zhou, X. Chen, Q. Wang, Q. Xue, D. C. Tsang, and C. S. Poon. 2020. “Engineering and Microstructure Properties of Contaminated Marine Sediments Solidified by High Content of Incinerated Sewage Sludge Ash.” Journal of Rock Mechanics and Geotechnical Engineering doi:https://doi.org/10.1016/j.jrmge.2020.10.002.
- Li, J., Y. Zhou, Q. Wang, Q. Xue, and C. S. Poon. 2019. “Development of a Novel Binder Using Lime and Incinerated Sewage Sludge Ash to Stabilize and Solidify Contaminated Marine Sediments with High Water Content as a Fill Material.” Journal of Materials in Civil Engineering 31 (10): 04019245. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0002913.
- Lorenzo, G. A., and D. T. Bergado. 2004. “Fundamental Parameters of Cement-Admixed Clay—New Approach.” Journal of Geotechnical and Geoenvironmental Engineering 130 (10): 1042–1050. doi:https://doi.org/10.1061/(ASCE)1090-0241(2004)130:10(1042).
- Mitchell, J. K., and K. Soga. 2005. Fundamentals of Soil Behavior. New York: John Wiley & Sons.
- Pu, H., A. K. Mastoi, X. Chen, D. Song, J. Qiu, and P. Yang. 2020. “An Integrated Method for the Rapid Dewatering and Solidification/Stabilization of Dredged Contaminated Sediment with a High Water Content.” Frontiers of Environmental Science & Engineering 15 (4): 1–12.
- Sharma, S., and D. Singh. 2015. “Characterization of Sediments for Sustainable Development: State of the Art.” Marine Georesources & Geotechnology 33 (5): 447–465. doi:https://doi.org/10.1080/1064119X.2014.953232.
- Suzuki, M., T. Fujimoto, and T. Taguchi. 2014. “Peak and Residual Strength Characteristics of Cement-Treated Soil Cured under Different Consolidation Conditions.” Soils and Foundations 54 (4): 687–698. doi:https://doi.org/10.1016/j.sandf.2014.06.023.
- Tremblay, H., J. Duchesne, J. Locat, and S. Leroueil. 2002. “Influence of the Nature of Organic Compounds on Fine Soil Stabilization with Cement.” Canadian Geotechnical Journal 39 (3): 535–546. doi:https://doi.org/10.1139/t02-002.
- Venda Oliveira, P. J., A. A. Correia, and M. R. Garcia. 2012. “Effect of Organic Matter Content and Curing Conditions on the Creep Behavior of an Artificially Stabilized Soil.” Journal of Materials in Civil Engineering 24 (7): 868–875. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0000454.
- Wang, J., J. Ni, Y. Cai, H. Fu, and P. Wang. 2017. “Combination of Vacuum Preloading and Lime Treatment for Improvement of Dredged Fill.” Engineering Geology 227: 149–158. doi:https://doi.org/10.1016/j.enggeo.2017.02.013.
- Wang, D., J. Xiao, F. He, and Y. Zhou. 2019. “Durability Evolution and Associated Micro-Mechanisms of Carbonated Reactive MgO-Fly Ash Solidified Sludge from East Lake.” Construction and Building Materials 208: 1–12. doi:https://doi.org/10.1016/j.conbuildmat.2019.02.173.
- Wu, D., Z. Dong, and W. Xu. 2013. “Application of Chemical-Physical Combined Method to Land Reclamation Using Seabed Marine Clay.” Chinese Journal of Rock Mechanics and Engineering 32 (9): 1779–1784.
- Wu, J., L. Liu, Y. Deng, G. Zhang, A. Zhou, and Q. Wang. 2021. “Distinguishing the Effects of Cementation versus Density on the Mechanical Behavior of Cement-Based Stabilized Clays.” Construction and Building Materials 271: 121571. doi:https://doi.org/10.1016/j.conbuildmat.2020.121571.
- Wu, D., W. Xu, and R. Tjuar. 2015. “Improvements of Marine Clay Slurries Using Chemical–Physical Combined Method (CPCM).” Journal of Rock Mechanics and Geotechnical Engineering 7 (2): 220–225. doi:https://doi.org/10.1016/j.jrmge.2015.02.001.
- Xiao, H., F. H. Lee, and K. G. Chin. 2014. “Yielding of Cement-Treated Marine Clay.” Soils and Foundations 54 (3): 488–501. doi:https://doi.org/10.1016/j.sandf.2014.04.021.
- Zhang, R., C. Dong, Z. Lu, and H. Pu. 2019. “Strength Characteristics of Hydraulically Dredged Mud Slurry Treated by Flocculation-Solidification Combined Method.” Construction and Building Materials 228: 116742. doi:https://doi.org/10.1016/j.conbuildmat.2019.116742.
- Zhang, R., J. Zheng, and X. Bian. 2017. “Experimental Investigation on Effect of Curing Stress on the Strength of Cement-Stabilized Clay at High Water Content.” Acta Geotechnica 12 (4): 921–936. doi:https://doi.org/10.1007/s11440-016-0511-3.
- Zhu, X., R. Anda, S. Gao, G. Yuan, J. Hai, and Q. Ye. 2021. “Effect of Water Content on Lime Additive Content in Vacuum Preloading with PVDs.” Marine Georesources & Geotechnology 39 (3): 333–310. doi:https://doi.org/10.1080/1064119X.2019.1699981.