Degradation behaviour of magnesium-rare earth biomedical alloys

References

• H. S. Brar, M. O. Platt, M. Sarntinoranont, P. I. Martin and M. N. Manuel: ‘Magnesium as a biodegradable and bioabsorbable material for medical implants’, JOM, 2009, 61, 31–34.
   Web of Science ®Google Scholar
• E. Wintermantel and S.-W. Ha: ‘Medizintechnik mit biokompatiblen Werkstoffen und Verfahren [Medical technology of biocompatible materials and methods]’, 3rd edn; 2002, Berlin, Springer.
   Google Scholar
• B. A. Shaw: ‘Corrosion resistance of magnesium alloys’, in ‘ASM hand book volume 13a: corrosion: fundamentals, testing and protection’, (ed. D. Stephen), 692–696; 2003, Materials Park, OH, ASM International.
   Google Scholar
• L. P. Xu, G. N. Yu, E. Zhang, F. Pan and K. Yang: ‘In vivo corrosion behavior of Mg–Mn–Zn alloy for bone implant: application’, J. Biomed. Mater. Res. A., 2007, 83A, 703–711.10.1002/(ISSN)1552-4965
   Web of Science ®Google Scholar
• F. Witte, N. Hort, C. Vogt, S. Cohen, K. U. Kainer, R. Willumeit and F. Feyerabend: ‘Degradable biomaterials based on magnesium corrosion’, Curr. Opin. Solid State Mater. Sci., 2013, 12, 63–72.
   Web of Science ®Google Scholar
• F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg and C. J. Wirth: ‘In vivo corrosion of four magnesium alloys and the associated bone response’, Biomaterials, 2005, 26, (17), 35, 57–63.
   Google Scholar
• F. Witte, J. Fischer, J. Nellesen, H.-A. Crostack, V. Kaese and A. Pisch: ‘In vitro and in vivo corrosion measurements of magnesium alloys’, Biomaterials, 2006, 27, (7), 1013–1018.10.1016/j.biomaterials.2005.07.037
   PubMed Web of Science ®Google Scholar
• N. T. Kirkland, J. Lespagnol, N. Birbilis and M. P. Staiger: ‘A survey of bio-corrosion rates of magnesium alloys’, Corros. Sci., 2010, 52, 287–291.10.1016/j.corsci.2009.09.033
   Web of Science ®Google Scholar
• Q. D. Wang, W. D. Chen, X. Q. Zeng, Y. Z. Lu, W. J. Ding and Y. P. Zhu: ‘Effects of Ca addition on the microstructure and mechanical properties of AZ91 magnesium alloy’, J. Mater. Sci., 2001, 36, (12), 3035–3040.
   Web of Science ®Google Scholar
• M. M. Avedesian: ‘Magnesium and magnesium alloys’; 1999, Materials Park, OH: ASM International.
   Google Scholar
• J. Lévesque, H. Hermawan, D. Dubé and D. Mantovani: ‘Design of a pseudo physiological test bench specific to the development of biodegradable metallic biomaterials’, Acta Biomater., 2008, 4, (2), 284–295.10.1016/j.actbio.2007.09.012
   PubMed Web of Science ®Google Scholar
• F. G. Evans: ‘Mechanical-properties and histology of cortical bone from younger and older men’, Anat. Rec., 1976, 185, (1), 1–11.10.1002/(ISSN)1097-0185
   PubMedGoogle Scholar
• Y. H. An and R. J. Freidman: ‘Animal models in orthopeaedic research’; 1999, Boca Raton, FL, CRC Press.
   Google Scholar
• B. R. Martin and D. B. N. A. S. Burr: ‘Skeletal tissue mechanics’; 1998, New York, NY, Springer.
   Google Scholar
• M. L. Bauccio: ‘ASM metals reference handbook’, 3rd edn; 2001, Materials Park, OH, ASM International.
   Google Scholar
• F. M. Knoop: ‘Erzeugung, Konsolidierung und Untersuchung gasverdüster Magnesiumlegierungen [Production, consolidation and analysis of gas atomized magnesium alloys]’; 1994, Clausthal, TU Clausthal.
   Google Scholar
• F. Renner: ‘Einlfussgrößen auf die Schwingfestigkeit von Magnesiumguss-und knetlegierungen und Lebensdauerberechnungenl [Influences on the fatigue strength of magnesium and -Guss -Knet alloys and lifetime calculations]’; 2004, Clausthal, TU Clausthal.
   Google Scholar
• C. Krause, D. Bormann, T. Hassel, F. W. Bach, H. Windhagen and A. Krause: ‘Mechanical properties of degradable magnesium implants in dependence of the implantation duration’ in ‘Magnesium technology in the global age’, (ed. M. O. Pekguleryuz and L. W. F. Mackenzie), 329–343; 2007, Montreal, Canada, Canadian Institute of Mining, Metallurgy and Petroleum (CIM).
   Google Scholar
• T. Hassel, F. W. Bach, A. Golovko and C. Krause: ‘Investigation of the mechanical properties and the corrosion behavior low alloyed magnesium–calcium alloys for use as absorbable biomaterial in the implant technique’, in ‘Magnesium technology in the global age’, (ed. M. O. Pekguleryuz and L. W. F. Mackenzie), 359–370; 2007, Montreal, Canada, Canadian Institute of Mining, Metallurgy and Petroleum (CIM).
   Google Scholar
• C. Kammer: ‘Magnesium taschenbuch. Düsseldorf [Magnesium paperback from Dusseldorf aluminium center]’; 2000, Germany: Aluminium Verlag.
   Google Scholar
• H. E. Boyer and T. L. Gall: ‘Metals handbook. Desk ed.’; 1985, Materials Park, OH, ASM International.
   Google Scholar
• X. Xia, Q. Chen, Z. Zhao, M. Ma, X. Li and K. Zhang: ‘Microstructure, texture and mechanical properties of coarse-grained Mg–Gd–Y–Nd–Zr alloy processed by multidirectional forging’, J. Alloys Compd., 2015, 623, 62–68.10.1016/j.jallcom.2014.10.084
   Web of Science ®Google Scholar
• F. Witte: ‘The history of biodegradable magnesium implants: a review’, Acta Biomater., 2010, 6, 1680–1692.10.1016/j.actbio.2010.02.028
   PubMed Web of Science ®Google Scholar
• X. Xia, Q. Chen, K. Zhang, Z. Zhao, M. Ma, X. Li, Y. Li: ‘Hot deformation behavior and processing map of coarse-grained Mg–Gd–Y–Nd–Zr alloy’, Mater. Sci. Eng. A., 2013, 587, 283–290.10.1016/j.msea.2013.08.066
   Web of Science ®Google Scholar
• G. Sha, J. H. Li, W. Xu, K. Xia, W. Q. Jie and S. P. Ringer: ‘Hardening and microstructural reactions in high-temperature equal-channel angular pressed Mg–Nd–Gd–Zn–Zr alloy’, Mater. Sci. Eng. A., 2010, 527, 5092–5099.10.1016/j.msea.2010.04.064
   Web of Science ®Google Scholar
• M. Bamberger, G. Atiya and S. Khawaled: ‘Comparison study of microstructure and phase evolution in Mg–Nd– and Mg–Gd-based alloys’, Metall. Mater. Trans. A, 2014, 45, 3241–3253.10.1007/s11661-013-2069-0
   Web of Science ®Google Scholar
• L. R. Gill, G. W. Lorimer and P. Lyon: ‘The effect of zinc and gadolinium on precipitation sequence and quench sensitivity of four Mg-Nd-Gd alloys’, Adv. Eng. Mater., 2007, 9, 784–792.10.1002/(ISSN)1527-2648
   Web of Science ®Google Scholar
• G. U. Xue-Nan and Y.-F. Zheng: ‘A review on magnesium alloys as biodegradable materials’, Front. Mater. Sci. China, 2010, 4, 111–115.
   Google Scholar
• F. Witte, N. Hort, C. Vogt, S. Cohen, K. U. Kainer, R. Willumeit and F. Feyerabend: ‘Degradable biomaterials based on magnesium corrosion’, Curr. Opin. Solid State Mater. Sci., 2008, 12, 63–72
   Web of Science ®Google Scholar
• http://www.magnesium-elektron.com.
   Google Scholar
• X. Gu, Y. Zheng, Y. Cheng, S. Zhong and T. Xi: ‘In vitro corrosion and biocompatibility of binary magnesium alloys’, Biomaterials, 2009, 30, (4), 484–498.10.1016/j.biomaterials.2008.10.021
   PubMed Web of Science ®Google Scholar
• Z. Li, X. Gu, S. Lou and Y. Zheng: ‘The development of binary Mg-Ca alloys for use as biodegradable materials within bone’, Biomaterials, 2008, 29, (10), 1329–1344.10.1016/j.biomaterials.2007.12.021
   PubMed Web of Science ®Google Scholar
• S. H. I. Fei, W. A. N. G. Chun-qing and Z. H. A. N. G. Zhong-ming: ‘Microstructures, corrosion and mechanical properties of as-cast Mg-Zn-Y-(Gd) alloys’, Trans. Nonferrous Met. Soc. China, 2015, 25, 2172–2180.
   Web of Science ®Google Scholar
• Z. P. Luo, S. Q. Zhang, Y. L. Tang and D. S. Zhao: ‘Quasicrystals in as-cast Mg-Zn-RE alloys’, Scr. Metall. Mater., 1993, 28, (12), 1513–1518.10.1016/0956-716X(93)90584-F
   Google Scholar
• Y. Kawamura, K. Hayashi, A. Inoue and T. Masumoto: ‘Rapidly solidified powder metallurgy Mg97Zn1Y alloys with excellent tensile yield strength above 600 MPa’, Mater. Trans., 2001, 42, (7), 1172–1176.10.2320/matertrans.42.1172
   Web of Science ®Google Scholar
• S. H. I. Fei, Y.-C. Yu, X.-F. Guo, Z.-M. Zhang and Y. Y. Li: ‘Corrosion behavior of as-cast Mg68Zn28Y4 alloy with I-phase’, Trans. Nonferrous Met. Soc. China, 2009, 19, (5), 1093–1097.10.1016/S1003-6326(08)60412-4
   Web of Science ®Google Scholar
• W.-P. Yang, X.-F. Guo and Z.-X. Lu: ‘TEM microstructure of rapidly solidified Mg-6Zn-1Y-1Ce’, Trans. Nonferrous Met. Soc. China, 2012, 22, (4), 786–792.
   Web of Science ®Google Scholar
• L. L. Rokhlin: ‘Magnesium alloys containing rare earth metals: structure and properties’; 2003, London: Taylor & Francis.
   Google Scholar
• J. F. Nie and B. C. Muddle: ‘Characterisation of strengthening precipitate phases in a Mg-Y-Nd alloy’, Acta Mater., 2000, 48, 1691–1703.10.1016/S1359-6454(00)00013-6
   Web of Science ®Google Scholar
• F. Feyerabend, J. Fischer, J. Holtz, F. Witte, R. Willumeit, H. Drücker, C. Vogt and N. Hort: ‘Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines’, Acta Biomater., 2010, 6, (5), 1834–1842.10.1016/j.actbio.2009.09.024
   PubMed Web of Science ®Google Scholar
• A. Srinivasan, Y. Huang, C. L. Mendis, C. Blawert, F. U. Kainer and N. Hort: ‘Investigations on microstructures, mechanical and corrosion properties of Mg-Gd-Zn alloys’, Mater. Sci. Eng. A., 2014, 595, 224–234.10.1016/j.msea.2013.12.016
   Web of Science ®Google Scholar
• T. B. Massalski and H. Okamoto: ‘Binary alloy phase diagrams’, 2nd edn., Plus updates; 1996, Materials Park, OH, ASM International, ISBN: 0-87170- 562-1, SAN: 204-7586.
   Google Scholar
• P. Vostrý, B. Smola, I. Stulíková, F. Von Buch and B. L. Mordike: ‘Microstructure evolution in isochronally heat treated Mg–Gd alloys’, Phys. Status Solidi A., 1999, 175, 491–500.10.1002/(ISSN)1521-396X
   Google Scholar
• J. F. Nie, X. Gao, S. M. and Zhu: ‘Enhanced age hardening response and creep resistance of Mg–Gd alloys containing Zn’, Scr. Mater., 2005, 53, 1049–1053.10.1016/j.scriptamat.2005.07.004
   Web of Science ®Google Scholar
• Y. Liu, G. Y. Yuan, W. J. Ding and C. Lu: ‘Deformation behavior of Mg–Zn–Gd-based alloys reinforced with quasicrystal and Laves phases at elevated temperatures’, J. Alloys Compd., 2007, 427, 160–165.10.1016/j.jallcom.2006.03.027
   Web of Science ®Google Scholar
• M. Yamasaki, T. Anan, S. Yoshimoto, Y. Kawamura: ‘Mechanical properties of warm-extruded Mg–Zn–Gd alloy with coherent 14H long periodic stacking ordered structure precipitate’, Scr. Mater., 2005, 53, 799–803. 10.1016/j.scriptamat.2005.06.006
   Web of Science ®Google Scholar
• E. S. Park, S. Yi, J. B. Ok, D. H. Bae, W. T. Kim and D. H. Kim: ‘Solidification and Microstructure Control of Mg-rich Alloys in the Mg-Zn-Y Ternary Systems’, MRS Proc., 2000, 643. doi:10.1557/PROC-643-K2.5
   Google Scholar
• A. Singh, M. Watanabe, A. Kato and A. P. Tsai: ‘Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application’, Mater. Sci. Eng. A., 2004, 385, 382–396.10.1016/S0921-5093(04)00903-7
   Web of Science ®Google Scholar
• A. Singh, A. P. Tsai and M. Nakamura: ‘Nanoprecipitates of icosahedral phase in quasicrystal-strengthened Mg-Zn-Y alloys’, Philos. Mag. Lett., 2003, 83, 543–551.10.1080/09500830310001597027
   Web of Science ®Google Scholar
• A. Singh, M. Watanabe, A. Kato and A. P. Tsai: ‘Twinning and the orientation relationships of icosahedral phase with the magnesium matrix’, Acta Mater., 2005, 53, 4733–4742.10.1016/j.actamat.2005.06.026
   Web of Science ®Google Scholar
• D. H. Bae, S. H. Kim, D. H. Kim and W. T. Kim: ‘Deformation behavior of Mg–Zn–Y alloys reinforced by icosahedral quasicrystalline particles’, Acta Mater, 2002, 50, 2343–2356.
   Web of Science ®Google Scholar
• I. J. Kim, K. H. Bae and K. H. Kim: ‘Precipitates in a Mg–Zn–Y alloy reinforced by an icosahedral quasicrystalline phase’, Mater. Sci. Eng. A., 2003, 359, 313–318.10.1016/S0921-5093(03)00352-6
   Web of Science ®Google Scholar
• A. Halstead and R. D. Rawlings: ‘The fracture behavior of 2 Co-Mo-Cr-Si wear resistant alloy’, J. Mater. Sci., 1985, 20, 1248–1256.
   Web of Science ®Google Scholar
• G. Yuan, H. Kato, K. Amiya and A. Inoue: ‘Excellent creep properties of Mg–Zn–Cu–Gd-based alloy strengthened by quasicrystals and Laves phases’, J. Mater. Res., 2005, 20, 1278–1286.
   Web of Science ®Google Scholar
• J. Levesque, D. Dube, M. Fiset and D. Mantovani: ‘Coronary stents’, Adv. Mater. Process, 2004, 162–169, 45–48.
   Web of Science ®Google Scholar
• H. G. Seiler and H. Sigel (Eds.): ‘Handbook on Toxicity of Inorganic Compounds’; 1988, New York, NY, Marcel Dekker Inc.
   Google Scholar
• J. Vormann: ‘Magnesium: nutrition and metabolism’, Mol. Aspects Med., 2003, 24, 27–37.10.1016/S0098-2997(02)00089-4
   PubMedGoogle Scholar
• H. Zreiqat, C. R. Howlett, A. Zannettion, P. Evans, G. Schulze-Tanzil and C. Knabe: ‘Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants’, J. Biomed. Mater. Res., 2002, 62, 175–184.
   PubMed Web of Science ®Google Scholar
• T. V. Thamaraiselvi and S. Rajeswari: ‘Biological evaluation of bioceramic materials – a review’, Trends Biomater. Artif. Organs, 2004, 18, 9–17.
   Google Scholar
• J. Nagels, M. Stokdijk and P. M. Rozing: ‘Stress shielding and bone resorption in shoulder arthroplasty’, J. Shoulder Elbow Surg., 2003, 12, 35–39.
   PubMed Web of Science ®Google Scholar
• G. Song: ‘Recent progress in corrosion and protection of magnesium alloys’, Adv. Eng. Mater., 2005, 7, 563–585.
   Web of Science ®Google Scholar
• V. Kaesel, P.-T. Tai, Fr.-W. Bach, H. Haferkamp, F. Witte and H. Windhagen: ‘Approach to control the corrosion of magnesium by alloying’, in (ed. K. U. Kainer), Proceedings of the Sixth International Conference Magnesium Alloys and Their Applications, Wolfsburg, Germany; 2003, 534.
   Google Scholar
• A. Meyer-Lindenberg, H. Windhugen and F. Witte: ‘Medical implant for the human or animal body’, 2004, US20040241036 A1.
   Google Scholar
• G. Song and S. Song: ‘Corrosion behaviour of pure magnesium in a simulated body fluid’, Acta Phys.-Chim. Sin., 2006, 22, 1222–1226.
   Web of Science ®Google Scholar
• A. P. Nazorov and Y. N. Miknailovskii: ‘Electrochemical and corrosion behavior of steel, magnesium, and aluminium primed with silanes’, Prot. Met., 1990, 26, (6), 749–754.
   Google Scholar
• H. Wang, Y. Estrin and Z. Zúberová: ‘Bio-corrosion of a magnesium alloy with different processing histories’, Mater. Lett., 2008, 62, (16), 2476–2479.
   Web of Science ®Google Scholar
• R.-C. Zeng, J. Chen, W. Dietzel, N. Hort and K. U. Kainer: ‘Electrochemical behavior of magnesium alloys in simulated body fluids’, Trans. Nonferrous Met. Soc. China, 2007, 17, 166–170.
   Web of Science ®Google Scholar
• Z. Yao, L. Li and Z. Jiang: ‘Adjustment of the ratio of Ca/P in the ceramic coating on Mg alloy by plasma electrolytic oxidation’, Appl. Surf. Sci., 2009, 255, (13–14), 6724–6728.10.1016/j.apsusc.2009.02.082
   Web of Science ®Google Scholar
• M. B. Kannan and R. K. Raman: ‘In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modifiedsimulated body fluid’, Biomateirals, 2008, 29, (15), 2306–2314.
   PubMed Web of Science ®Google Scholar
• G. Song: ‘Control of biodegradation of biocompatible magnesium alloys’, Corros. Sci., 2007, 49, (4), 1696–1701.10.1016/j.corsci.2007.01.001
   Web of Science ®Google Scholar
• L. Xu, E. Zhang, D. Yin, S. Zeng and K. Yang: ‘In vitro corrosion behaviour of Mg alloys in a phosphate buffered solution for bone implant application’, J. Mater. Sci. Mater. Med., 2008, 19, (3), 1017–1025.
   PubMed Web of Science ®Google Scholar
• E. Zhang, D. Yin, L. Xu, L. Yanga and K. Yanga: ‘Microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Mn alloys for biomedical application’, Mater. Sci. Eng. C., 2009, 29, (3), 987–993.10.1016/j.msec.2008.08.024
   Web of Science ®Google Scholar
• Jie Yang, Lidong Wang, Limin Wang and Hongjie Zhang: ‘Microstructures and mechanical properties of the Mg–4.5Zn–xGd (x = 0, 2, 3 and 5) alloys’, J. Alloys Compd., 2008, 459, 274–280.10.1016/j.jallcom.2007.05.044
   Web of Science ®Google Scholar
• N. Birbilis, M. A. Easton, A. D. Sudholz, S. M. Zhu and M. A. Gibson: ‘On the corrosion of binary magnesium-rare earth alloys’, Corros. Sci., 2009, 51, 683–689.10.1016/j.corsci.2008.12.012
   Web of Science ®Google Scholar
• T. Rzychon, J. Michalska and A. Kiełbus: ‘Effect of heat treatment on corrosion resistance of WE54 alloy’, J. Achiev. Mater. Manuf. Eng., 2007, 20, 191–194.
   Google Scholar
• A. J. Davenport, C. Padovani, B. J. Connolly, N. P. C. Stevens, T. A. W. Beale, A. Groso and M. Stampanoni: ‘Synchrotron X-ray microtomography study of the role of Y in corrosion of magnesium alloy WE43’, Electrochem. Solid-State Lett., 2007, 10, C5–C8.
   Google Scholar
• T. Valente: ‘Grain boundary effects on the behavior of WE43 magnesium castings in simulated marine environment’, J. Mater. Sci. Lett., 2001, 20, 67–69.
   Google Scholar
• F. Zucchi, V. Grassi, A. Frignani, C. Monticelli and G. Trabanelli: ‘Electrochemical behavior of a magnesium alloy containing rare earth elements’, J. Appl. Electrochem., 2006, 36, 195–204.
   Web of Science ®Google Scholar
• P. L. Miller, B. A. Shaw, R. G. Wendt and W. C. Moshier: ‘Assessing the corrosion resistance of nonequilibrium magnesium–Yttrium alloys’, Corrosion, 1995, 52, 922–931.
   Google Scholar
• Mark P. Staiger, Alexis M. Pietak, Jerawala Huadmai and George Dias: ‘Magnesium and its alloys as orthopedic biomaterials: a review’, Biomaterials, 2006, 27, 1728–1734.
   PubMed Web of Science ®Google Scholar
• A. Lambotte: ‘L’utilisation du magnesium comme materiel perdu dans l’osteosynthe` se [The utilization of magnesium as a material in osteosynthesis]’, Bull. Mem. Soc. Nat. Chir, 1932, 28, 1325–1334.
   Google Scholar
• V. V. Troitskii and D. N. Tsitrin: ‘The resorbing metallic alloy ‘Osteosinthezit’ as material for fastening broken bone’, Khirurgiia, 1944, 8, 41–44.
   Google Scholar
• E. D. McBride: ‘Absorbable metal in bone surgery’, J. Am. Med. Assoc., 1938, 111, 2464–2467.
   Google Scholar
• J. Verbrugge: ‘Le Mate′ riel Me′tallique Re′sorbable En Chirurgie Osseuse [Resorbable metallic material in bone surgery]’, Presse Med., 1934, 23, 460–465.
   Google Scholar
• M. S. Znamenskii: ‘Metallic osteosynthesis by means of an apparatus made of resorbing metal’, Khirurgiia, 1945, 12, 60–63.
   Google Scholar
• W. Scholz: ‘Supporting or sustaining part for implant in bone composed of porous magnesium filled with calcium phosphate‘, German patent No. 102 41 572, 2004.
   Google Scholar
• F. Witte, H. A. Crostack, J. Nellesen, F. Beckmann: ‘Characterization of degradable magnesium alloys as orthopaedic implant material by synchrotron-radiation-based microtomography’, 2001, available at [http://wwwhasylab.desy.de/science/annual_reports/2001_report/part1/contrib/47/5461.pdf].
   Google Scholar
• G. B. Stroganov, E. Savitsky, T. Mikhailovich, M. Nina, V. Terekhova, V. Fedorovna, N. Mikhailovna and M. Vasilievich: ‘Magnesium-base alloys for use in bone surgery’, US Patent 3,687,135, 1972.
   Google Scholar
• X. Zhang, Y. Wub, Y. Xue, Z. Wang and L. Yang: ‘Biocorrosion behavior and cytotoxicity of a Mg–Gd–Zn–Zr alloy with long period stacking ordered structure’, Mater. Lett., 2012, 86, 42–45.
   Web of Science ®Google Scholar
• C. A. Grillo, F. Alvarez, M. A. Fernández and L. de Mele: ‘Cellular response to rare earth mixtures (La and Gd) as components of degradable Mg alloys for medical applications’, Colloids Surf. B, 2014, 117, 312–321.
   PubMed Web of Science ®Google Scholar
• N. C. V. S. Roney, M. Williams, M. Osier and S. J. Paikoff: ‘A toxicological profile for zinc‘, 2005, available at [http://www.atsdr.cdc.gov/toxprofiles/tp60.pdf].
   Google Scholar
• S. Keith, D. Jones, Z. Rosemond, L. Ingerman and L. Chappell: ‘Toxicologi-cal profile for aluminum‘, 2008, available at [http://www.atsdr.cdc.gov/toxprofiles/tp22.pdf].
   Google Scholar
• M. Williams-Johnson, K. B. Altshuler, S. W. Rhodes and L. Kolb: ‘A toxicological profile for manganese‘, 2000, available at [http://www.atsdr.cdc.gov/toxprofiles/tp151.pdf].
   Google Scholar
• C. Lorenz, J. G. Brunner, P. Kollmannsberger, L. Jaafar, B. Fabry and S. Virtanen: ‘Effect of surface pre-treatments on biocompatibility of magnesium‘, Acta Biomater., 2009, 5, 2783–2789.
   PubMed Web of Science ®Google Scholar