Carbide precipitation and hydrogen embrittlement susceptibility of a 960 MPa grade ultra-high strength steel

References

• Xie ZJ, Fang YP, Han G, et al. Structure–property relationship in a 960 MPa grade ultrahigh strength low carbon niobium–vanadium microalloyed steel: The significance of high frequency induction tempering. Mater Sci Eng. 2014;618:112.
   Google Scholar
• Xie ZJ, Fang YP, Cui Y, et al. Effect of reheating rate on microstructure and properties of high-strength-toughness steel. Mater Sci Technol. 2016;32:691.
   Web of Science ®Google Scholar
• Fang YP, Xie ZJ, Shang CJ. Effect of induction tempering on carbide precipitation behavior and toughness of a 1000 MPa grade high strength low alloy steel. Jinshu Xuebao. 2014;50:1413.
   Google Scholar
• Xue HB, Cheng YF. Characterization of inclusions of X80 pipeline steel and its correlation with hydrogen-induced cracking. Corros Sci. 2011;53:1201.
   Web of Science ®Google Scholar
• Matsumura O, Sakuma Y, Ishii Y, et al. Effect of Retained Austenite on Formability of High Strength Sheet Steels. ISIJ Int. 1992;32:1110.
   Web of Science ®Google Scholar
• Jun HJ, Park SH, Choi SD, et al. Decomposition of retained austenite during coiling process of hot rolled TRIP-aided steels. Mater Sci Eng. 2004;379:204.
   Google Scholar
• Speer J, Matlock DK, De Cooman BC, et al. Carbon partitioning into austenite after martensite transformation. Acta Mater. 2003;51:2611.
   Web of Science ®Google Scholar
• Liu Q, Zhou Q, Venezuela J, et al. Hydrogen influence on some advanced high-strength steels. Corros Sci. 2017;125:114.
   Web of Science ®Google Scholar
• Lee JB, Kang N, Park JT, et al. Kinetics of carbide formation for quenching and tempering steels during high-frequency induction heat treatment. Mater Chem Phys. 2011;129:365.
   Web of Science ®Google Scholar
• Bhadeshia HKDH, Honeycombe RWK. Steels. 3rd ed. USA: Butterworth–Heinemann; 2006. p. 95–183.
   Google Scholar
• Hirth JP. Effects of hydrogen on the properties of iron and steel. Metall Trans. 1980;11:861.
   Web of Science ®Google Scholar
• Liao CM, Lee JL. Effect of Molybdenum on Sulfide Stress Cracking Resistance of Low-Alloy Steels. Corrosion. 1994;50:695.
   Web of Science ®Google Scholar
• Bergers K, Camisão de Souza E, Thomas I, et al. A review of hydrogen embrittlement of martensitic advanced high-strength steels. J Flock Steel Res Int. 2010;81:499.
   Google Scholar
• Lob A, Senk D, Hallstedt B. Determination of Hydrogen Solubility in Fe-Mn-C Melts. Steel Res Int. 2011;82:108.
   Web of Science ®Google Scholar
• Hardie D, Liu S. The effect of stress concentration on hydrogen embrittlement of a low alloy steel. Corros Sci. 1996;38:721.
   Web of Science ®Google Scholar
• Nagumo M. Hydrogen related failure of steels – a new aspect. Mater Sci Technol. 2004;20:940.
   Web of Science ®Google Scholar
• Venezuela J, Zhou Q, Liu Q, et al. Influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels in simulated service conditions. Corros Sci. 2016;111:602.
   Web of Science ®Google Scholar
• Hagi H, Hayashi Y, Ohtani N. Diffusion Coefficient of Hydrogen in Pure Iron between 230 and 300 K. Trans Jpn Inst Met. 1979;20:349.
   Google Scholar
• Choo WY, Lee JY. Thermal analysis of trapped hydrogen in pure iron. Metall Trans. 1982;13:135.
   Web of Science ®Google Scholar
• Pulkkinen H, Papula S, Todoshchenko O, et al. Effect of inclusions and precipitates on hydrogen embrittlement of Mn‐A lloyed austenitic stainless steels. Steel Res Int. 2013;84:966.
   Web of Science ®Google Scholar
• Rehrl J, Mraczek K, Pichler A, et al. The Impact of Nb, Ti, Zr, B, V, and Mo on the hydrogen diffusion in four different AHSS/UHSS microstructures. Steel Res Int. 2013;85:336.
   Web of Science ®Google Scholar
• Depover T, Verbeken K. The detrimental effect of hydrogen at dislocations on the hydrogen embrittlement susceptibility of Fe-C-X alloys: an experimental proof of the HELP mechanism. Int J Hydrogen Energy. 2018;43:3050.
   Web of Science ®Google Scholar
• Kim HJ, Jeon SH, Yang WS, et al. Effects of titanium content on hydrogen embrittlement susceptibility of hot-stamped boron steels. J Alloys Compd. 2018;735:2067.
   Web of Science ®Google Scholar
• Turk A, Martín DS, Castillo PEJRD, et al. Correlation between vanadium carbide size and hydrogen trapping in ferritic steel. Scr Mater. 2018;152:112.
   Web of Science ®Google Scholar
• Zhu X, Li W, Hsu TY, et al. Improved resistance to hydrogen embrittlement in a high-strength steel by quenching–partitioning–tempering treatment. Scr Mater. 2015;97:21.
   Web of Science ®Google Scholar
• Chen YS, Haley D, Gerstl SSA, et al. Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel. Science. 2017;355:1196.
   PubMed Web of Science ®Google Scholar
• Wang MQ, Akiyama E, Tsuzaki K. Effect of hydrogen on the fracture behavior of high strength steel during slow strain rate test. Corros Sci. 2007;49:4081.
   Web of Science ®Google Scholar
• Enomoto M, Hayashi K. Modeling the growth of austenite in association with cementite during continuous heating in low-carbon martensite. J Mater Sci. 2018;53:6911.
   Web of Science ®Google Scholar
• Nam WJ, Kim DS, Ahn ST. Effects of alloying elements on microstructural evolution and mechanical properties of induction quenched-and-tempered steels. J Mater Sci. 2003;38:3611.
   Web of Science ®Google Scholar
• Hayakawa M, Matsuoka S, Tsuzaki K, et al. Atomic force microscopy of induction- and furnace-heating-tempered prestressed steels with different delayed fracture properties. Scr Mater. 2002;47:655.
   Web of Science ®Google Scholar
• de Freitas E, Ferrante M, da Silva VF, et al. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour. J Mater Process Technol. 2004;155:1629.
   Web of Science ®Google Scholar