References
- Guo L, Su X, Dai L, et al. Strain ageing embrittlement behaviour of X80 self-shielded flux-cored girth weld metal. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2164978
- Xu CM, Luo LH, Zhou HP, et al. Influence of B-type sleeve welding on the performance of X80 pipeline steel. Mater Protect. 2019;52(6):149–12.
- Zhang L, Wang ZZ, Jia XM, et al. Oil and gas pipeline defect repair method and field application. China Petrol Chem Stand Qual. 2019;39(20):2.
- Guo JY, Hu J, Li QD, et al. Research progress on corrosion and protection of oil and gas pipelines at home and abroad. Mater Protect. 2017;50(6):83–87.
- Li YG, Du J, Zhao GX, et al. Overview of long distance oil/gas pipeline defects and repair technology. Petrol Eng Constr. 2016;42(1):10–13.
- Li YG, Zhang W, Zhao Z, et al. Discussion on repair technology of girth weld defects of high-grade steel pipelines. Oil & Gas Storage Transp. 2020;39(3):7.
- Sun BL, Wang ZF, Song HB. Operation quality control of B-type sleeve used for hidden dangers treatment of circumferential welds in large-diameter and high-grade steel pipelines. Prot Oil & Gas Pipelines. 2019;5:48.
- Weaver MR, Maldonado AJ, Banuelos JL, Misra RDK. On precipitation hardening behaviour in a triaxial forged Mg-2Zn-2Gd alloy and relationship to mechanical properties. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2215038
- Yang C, Xu H, Wang Y, et al. Hot tearing analysis and process optimisation of the fire face of Al-Cu alloy cylinder head based on MAGMA numerical simulation. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2165245
- Misra RDK. Enabling manufacturing of multi-axial forging-induced ultrafine-grained strong and ductile magnesium alloys: a perspective of process-structure-property paradigm. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2189769
- Wang L, Li J, Liu ZQ, et al. Towards strength-ductility synergy in nanosheets strengthened titanium matrix composites through laser power bed fusion of MXene/Ti composite powder. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2181680
- Misra RDK, Challa VSA, Injeti VSY. Phase reversion-induced nanostructured austenitic alloys: an overview. Mater Technol. 2022;37(7):437–449. doi:10.1080/10667857.2022.2065621
- Misra RDK. On the relationship between the grain boundary bio-physical attributes with the cells in the physiological environment. Materials Letters. 2023;31:133443. doi: 10.1016/j.matlet.2022.133443
- Niu G, Zurob HS, Misra RDK, et al. Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure. Acta Materialia. 2022;226(226):226. doi: 10.1016/j.actamat.2022.117642
- Li Q, Zuo H, Feng J, et al. Strain rate and temperature sensitivity on the flow behaviour of a duplex stainless steel during hot deformation. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2166216
- Ning H, Li X, Meng L, et al. Effect of Ni and Mo on microstructure and mechanical properties of grey cast iron. Mater Technol. 2023;38(1). doi: 10.1080/10667857.2023.2172991
- Misra RDK. Understanding the weakening of texture in multiaxial forged ultrafine-grained strong and ductile Mg-2Zn-2Gd alloy. Mater Technol. 2024;39(1). doi: 10.1080/10667857.2024.2321411
- Wu D, Liu ZJ, Su YH, et al. Effect of inclusions on microstructure of high strength steel weld metal and formation of cold crack. Hot Working Technol. 2018;47(23):4.
- Wen QP. Effect of weld microstructure on cold crack. Hot Working Technol. 2014;43(13):3.
- Fang CC. Analysis of embrittlement and cold cracking in the heat affected zone of low alloy-high strength steel welds. Welded Pipe Tube. 2001;24(3):3.
- Guo SL, Wu XL, Li E, et al. Influence of interpass temperature on the HAZ cold crack and microstructure thick wall 16MND5 steel structure. Electr Weld Mach. 2019;49(4):7.
- Arzola N, Araque O. Prediction of fatigue life for a transverse fillet welded joint and analysis of the influence of crack eccentricity on the failure. Dyna. 2013;80(182):95–104.
- Abe T, Arakawa J, Akebono H. Analysis of fatigue crack propagation behavior of structures with one-sided welding in fillet welded joint for load-carrying type. Mater Trans. 2022;63(7):1037–1045. doi: 10.2320/matertrans.MT-Z2022003
- Redza MR, Manurung YHP, Lidam RNA, et al. Transversed residual stress analysis on multipassed fillet weld 2D-using FEM and experiment. Adv Mater Res. 2012;576:181–184. doi: 10.4028/www.scientific.net/AMR.576.181
- Yukio U, Keiji F, Keiji N. Study on type of cracking of fillet weld based on residual stresses calculated by F.E.M. J Jap Weld Soc. 1975;44(3):250–257. doi: 10.2207/qjjws1943.44.6_466
- Nagai T, Kasai R, Suzuki R, et al. An estimation of factors influencing residual stress characteristics of fillet welded lap joints. Weld Int. 2017;31(12):202–210. doi: 10.1080/09507116.2016.1223239
- Hou GQ, Ma R, Qin J, et al. Effect of welding process parameters on residual stress of fillet weld. Welding Technol. 2016;45(3):37–39.
- Liu CX, Niu K, Fan ZD, et al. Study on cracking causes of 12Cr1MoV water wall of a supercritical boiler after repair welding. Hot Working Technol. 2022;51(3):157–161.
- Chen H, Gong JM, Tu SD. Simulation analysis of welding residual stress of typical closed girth weld multi-pass welding. Trans China Weld Inst. 2006;27(10):77–80+120–121.
- Gu SJ, Zhang YY, Yang P, et al. Numerical simulation on welding residual stress of tube and tube-tube sheet welded joints of exchanger. Hot Working Technol. 2010;39(3):155–157.
- Zhong QP, Zhao ZH. Fractography[m]. Beijing, China: Higher Education Press; 2006.
- Li HL, Yu ZZ, Li Y, et al. Relationship between hydrogen-induced additive stress and threshold cracking stress for a high-strength steel. Corros Protect. 2009;30(10):678–683.
- Song J, Curtin WA. Mechanisms of hydrogen-enhanced localized plasticity: an atomistic study using α-Fe as a model system. Acta Mater. 2014;68:61–69. doi: 10.1016/j.actamat.2014.01.008
- Ohaeri E, Eduok U, Szpunar J. Hydrogen related degradation in pipeline steel: a review. Int J Hydrogen Energy. 2018;43(31):14584–14617. doi: 10.1016/j.ijhydene.2018.06.064
- Wu YL, Jiao H, Yi R, et al. The effect of heat input on the microstructure and properties of high-strength weathering resistant steel FCAW joints. Weld Joining. 2019;548(2):65–70+74.