- Goldstein, RJ, 1971. Advances in Heat Transfer. Vol. 7. New York. 1971. p. pp. 321–379.
- Kercher, DM, 1998. A film cooling CFD bibliography: 1971–1996, Int. J. of Rotating Machinery 4 (1998), pp. 61–72.
- Blair, MF, 1974. "An experimental study of heat transfer and film cooling on large scale turbine endwalls". In: J. of Heat Transfer. 1974. pp. 524–529.
- O'Malley, K, 1984. "Theoretical Aspects of Film Cooling. PhD Thesis". In: University of Oxford. 1984.
- Sarkar, S, and Bose, TK, 1995. Comparison of different turbulence models for prediction of slot-film cooling-flow and temperature-field, Numer. Heat Transfer B 28 (2) (1995), pp. 217–238.
- Kassimatis, PG, Bergeles, GC, Jones, TV, and Chew, JW, 2000. Numerical investigation of the aerodynamics of the near slot film cooling, Int. J. Numer. Methods in Fluids 32 (1) (2000), pp. 85–104.
- Goldstein, RJ, Eckert, ERG, and Ramsey, JW, 1998. Film cooling with injection through holes: adiabatic wall temperatures downstream of a circular hole, ASME Journal of Engineering for Power 90 (1998), pp. 384–395.
- Goldstein, RJ, Eckert, ERG, and Burggraf, F, 1974. Effects of hole geometry and density on three dimensional film cooling, Int. J. of Heat and Mass Transfer 17 (1974), pp. 595–607.
- York, DY, and Leylek, JH, "Leading edge film cooling physics: part I – adiabatic effectiveness". In: ASME-paper GT-2002-30166. The Netherlands.
- York, DY, and Leylek, JH, "Leading edge film cooling physics: part II – heat transfer coefficient". In: ASME-paper GT-2002-30167. The Netherlands.
- Heselhaus, A, and Vogel, DT, 1995. "Numerical simulation of turbine blade cooling with respect to blade heat conduction and inlet temperature profiles". In: AIAA Paper No. 95-3041. 1995, 31st AIAA/ASME/SAE/ASEE Joint Propulsion, Conference and Exhibit, San Diego, CA, July.
- York, WD, and Leylek, JH, 2003. "Three-dimensional conjugate heat transfer simulation of an internally-cooled gas turbine vane". In: ASME Paper 2003-GT-38551. Georgia, USA. 2003.
- Kassab, AJ, Divo, E, Heidmann, JD, Steinthorsson, E, and Rodriguez, F, 2003. BEM/FVM conjugate heat transfer analysis of a three-dimensional film cooled turbine blade, International Journal for Numerical Methods in Heat Transfer and Fluid Flow 13 (5) (2003), pp. 581–610.
- Kurpisz, K, and Nowak, AJ, 1992. BEM approach to inverse heat conduction problems, Eng. Analysis 10 (1992), pp. 291–297.
- Maillet, D, Degiovanni, A, and Pasquetti, R, 1991. Inverse heat conduction applied to measurements of heat transfer coefficient on a cylinder: comparison between an analytical and a boundary element technique, J. Heat Transfer 113 (1991), pp. 549–557.
- Farid, MS, and Hsieh, CK, 1992. Measurement of free convection heat transfer coefficient for a rough horizontal nonisothermal cylinder in ambient air by infrared scanning, J. Heat Transfer 114 (1992), pp. 1054–1056.
- Martin, TJ, and Dulikravich, GS, 1998. Inverse determination of steady heat convection coefficient distributions, J. Heat Transfer 120 (1998), pp. 328–334.
- Kassab, AJ, Divo, E, and Chyu, M, 1999. "A BEM-based inverse algorithm to retrieve multi-dimensional heat transfer coefficients from transient temperature measurements, BETECH99". In: Computational Mechanics. Boston, MA. 1999. p. pp. 65–74, In: C.S. Chen, C.A. Brebbia and D. Pepper (Eds), Proceedings of the 13th International Boundary Element Technology Conference, Las Vegas, June 8–10.
- Divo, E, Kassab, AJ, Kapat, JS, and Chyu, MK, 1999. Retrieval of multidimensional heat transfer coefficient distributions using an inverse BEM-based regularized algorithm: numerical and experimental results, ASME paper HTD-Vol. 364-1 (1999), p. pp. 235–244, In: L.C. Witte (Ed.), Proceedings of the ASME, Heat Transfer Division.
- Kassab, AJ, Divo, E, and Kapat, JS, 2001. Multi-dimensional heat flux reconstruction using narrow-band thermochromic liquid crystal thermography, Inverse Problems in Engineering 9 (2001), pp. 537–559.
- Bialecki, RA, Divo, E, and Kassab, AJ, 2001. Unknown time dependent heat flux boundary condition reconstruction using a BEM-based inverse algorithm, Electronic Journal of Boundary Elements Vol BETEQ2001, No. 1 (2001), p. pp. 104–114, (2002)http://tabula.rutgers.edu/EJBE/proceedings/.
- Bialecki, R, Divo, E, Kassab, AJ, and Ait Maalem, RLahcen, 2003. Explicit calculation of smoothed sensitivity coefficients for linear problems, International Journal for Numerical Methods in Engineering 57 (2) (2003), pp. 143–167.
- Powell, MJD, 1992. "The theory of radial basis function approximation". In: Advances in Numerical Analysis. Vol. II. Oxford. 1992. p. pp. 143–167, In: W. Light, (Ed.).
- Jichun, Li, and Chen, CS, 2001. A simple efficient algorithm for interpolation between different grids in both 2D and 3D, Mathematics and Computers in Simulation 58 (2) (2001), pp. 125–132.
- Hansen, PC, 1992. Analysis of discrete ill-posed problems by means of the L-curve, SIAM Rev. 34 (1992), pp. 561–580.
- Hansen, PC, and O'leary, DP, 1993. The use of the L-curve in the regularization of discrete ill-posed problems, SIAM J. Sci. Comput. 14 (1993), pp. 1487–1503.
- Morosov, VA, 1984. Methods for Solving Incorrectly Posed Problems. Berlin. 1984.
- Morozov, VA, 1992. Regularization Methods for Ill-Posed Problems. Boca Raton, Florida. 1992.
- Goldberg, DE, 1989. Genetic Algorithms in Search, Optimization and Machine Learning. Reading, MA. 1989.
- Wrobel, LC, and Aliabadi, MH, 2002. The Boundary Element Method: applications in Thermo-Fluids and Acoustics. Vol. Vol 1. New York. 2002.
- Kassab, AJ, and Wrobel, LC, 2000. "Boundary element methods in heat conduction". In: Recent Advances in Numerical Heat Transfer. Vol. 2. New York. 2000. p. pp. 143–188, In: W.J. Mincowycz and E.M. Sparrow (Eds), Chapter 5.
- Divo, E, and Kassab, AJ, 2003. Boundary Element Method for Heat Conduction with Applications in NonHomogeneous Media. Southampton, UK, and Boston, USA. 2003.
- Kassab, AJ, Wrobel, LC, Bialecki, R, and Divo, E, 2004. "Boundary elements in heat transfer". In: Chapter 6 in Handbook of Numerical Heat Transfer. 2004, In: W. Minkowycz, E.M. Sparrow and J.Y. Murthy (Eds), 2nd Edn., in press.
- Incropera, FP, and DeWitt, DP, 2002. Introduction to Heat Transfer. New York. 2002, 4th Edn..
- Kays, WM, and Crawford, ME, 1993. Convective Heat and Mass Transfer. New York. 1993.
Free access
An inverse boundary element method/genetic algorithm based approach for retrieval of multi-dimensional heat transfer coefficients within film cooling holes/slots
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.