Energy release and countermeasures for sand casting explosion accidents

References

• Acharya SG, Vadher JA, and Kothari KD. 2017. Evaluation of critical parameters for sand inclusion defect in FNB casting. Arch Foundry Eng 17:5–12 doi: 10.1515/afe-2017-0001
   Web of Science ®Google Scholar
• Abbasi T, and Abbasi SA. 2007. The boiling liquid expanding vapour explosion (BLEVE): mechanism, consequence assessment, management. J Hazard Mater 141:489–519 doi: 10.1016/j.jhazmat.2006.09.056
   PubMed Web of Science ®Google Scholar
• Balkhyour MA, Ahmad I, and Rehan M. 2019. Assessment of personal protective equipment use and occupational exposures in small industries in Jeddah: Health implications for workers. Saudi JBiol Sci 26:653–9 doi: 10.1016/j.sjbs.2018.06.011
   PubMed Web of Science ®Google Scholar
• Benromdhane SA. 2018. Probabilistic risk-based pollution prevention model for a foundry: a case study of casting. Environ Sci Pollut Res 25:18332–44 doi: 10.1007/s11356-018-1953-y
   PubMed Web of Science ®Google Scholar
• Berthoud V. 2000. Vapor explosions. Annu Rev Fluid Mech 32:573–611 doi: 10.1146/annurev.fluid.32.1.573
   Web of Science ®Google Scholar
• Danko R, Holtzer M, and Gorny M. 2013. Effect of reclamation on the skin layer of ductile iron cast in furan molds. J Mater Eng Perform 22:3592–600 doi: 10.1007/s11665-013-0656-2
   Web of Science ®Google Scholar
• Dell T, and Berkhout J. 1998. Injuries at a metal foundry as a function of job classification, length of employment and drug screening. J Safety Res29:9–14 doi: 10.1016/S0022-4375(97)00024-8
   Web of Science ®Google Scholar
• Furuya M, Matsumura K, and Kinoshita I. 2002. A linear stability analysis of a vapor film in terms of the triggering of vapor explosions. J Nucl Sci Technol 39:1026–32 doi: 10.1080/18811248.2002.9715290
   Web of Science ®Google Scholar
• Ge J, Xu K, Zheng X, et al. 2019. The main challenges of safety science. Saf Sci 118:119–25. doi: 10.1016/j.ssci.2019.05.006
   Web of Science ®Google Scholar
• Gerkensmeier B, and Ratter B. 2018. Multi-risk, multi-scale and multi-stakeholder – the contribution of a bow-tie analysis for risk management in the trilateral Wadden Sea Region. J Coast Conserv 22:145–56 doi: 10.1007/s11852-016-0454-8
   Web of Science ®Google Scholar
• Grant E, Salmon PM, Stevens NJ, et al. 2018. Back to the future: What do accident causation models tell us about accident prediction. Saf Sci 104:99–109. doi: 10.1016/j.ssci.2017.12.018
   Web of Science ®Google Scholar
• Hasanbeigi A, Jiang Z, and Price L. 2014. Retrospective and prospective analysis of the trends of energy use in Chinese iron and steel industry. J Cleaner Prod 74:105–18 doi: 10.1016/j.jclepro.2014.03.065
   Web of Science ®Google Scholar
• Holtzer M, Dańko R, and Kmita A. 2016. Influence of a reclaimed sand addition to moulding sand with furan resin on its impact on the environment. Water Air Soil Pollut 227:16. doi: 10.1007/s11270-015-2707-9
   PubMed Web of Science ®Google Scholar
• Hong Y, Sun S, and He Y. 2015. Liquid aluminum explosion accident analysis in the casting process caused by power failure. Yunnan Metall 44:83–5 (in Chinese with English abstract). Available at: http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=ynyj201501020
   Google Scholar
• Jooma Z, Hoagland H, and Hines RW. 2019. How expert advice in a tracking-arc incident investigation saved money: preventing unnecessary spending on new personal protective equipment. IEEE Ind Appl Mag 25:60–4. doi: 10.1109/MIAS.2018.2875181
   Web of Science ®Google Scholar
• Katsakiori P, Sakellaropoulos G, and Manatakis E. 2009. Towards an evaluation of accident investigation methods in terms of their alignment with accident causation models. Saf Sci 47:1007–15. doi: 10.1016/j.ssci.2008.11.002
   Web of Science ®Google Scholar
• Li G, and Ji T. 2016. Severe accidental water vapour explosions in a foundry in China in 2012. J Loss Prev Process Ind 41:55–9. doi: 10.1016/j.jlp.2016.03.001
   Web of Science ®Google Scholar
• Liu Z. 2016. Research for airbag catapult acceleration method and application in train crash test (Doctor Thesis), p. 41. Southwest Jiaotong University, Chengdu, China (in Chinese with English abstract). Available at: http://www.lib.swjtu.edu.cn/
   Google Scholar
• Markowski AS, and Kotynia A. 2011. Bow-tie” model in layer of protection analysis. Process Saf Environ Prot 89:205–13. doi: 10.1016/j.psep.2011.04.005
   Web of Science ®Google Scholar
• Ministry of Emergency Management of Liaoning 2013. Investigation report of the major explosion accident in the steel-casting foundry of Heavy Machinery Co. Ltd., Anshan Iron and Steel Group. Available at: http://yjgl.ln.gov.cn/xxgk/zdzfxxgk/aqsczdlyxxgk/sgdccl/201706/t20170606_2962973.html
   Google Scholar
• Mohiuddin MV, Hussainy SF, Krishnaiah A, et al. 2017. Experimental investigation to produce thin-walled sand casting using combination of casting simulation and additive manufacturing techniques. Int J Adv Manuf Technol 90:3147–57. doi: 10.1007/s00170-016-9653-6
   Web of Science ®Google Scholar
• Naplekov DM, Semynozhenko VP, and Yanovsky VV. 2014. Equation of state of an ideal gas with nonergodic behavior in two connected vessels. Phys Rev E 89:012920. doi: 10.1103/PhysRevE.89.012920
   Web of Science ®Google Scholar
• Peter B, and Jozef P. 2015. FTA analysis of the failure in the horizontal fluidity test. Metall Mater Eng 21:229–40. Available at: https://doaj.org/article/a84e30ca71d54e14acfca817db089fca
   Google Scholar
• Pinhasi GA, Ullmann A, and Dayan A. 2007. 1D plane numerical model for boiling liquid expanding vapor explosion (BLEVE). Int J Heat Mass Transf 50:4780–95. doi: 10.1016/j.ijheatmasstransfer.2007.03.016
   Web of Science ®Google Scholar
• Porru S, Calza S, and Arici C. 2011. An effectiveness evaluation of a multifaceted preventive intervention on occupational injuries in foundries: a 13-year follow-up study with interrupted time series analysis. Int Arch Occup Environ Health 84:867–76. doi: 10.1007/s00420-011-0638-3
   PubMed Web of Science ®Google Scholar
• Purton L, Clothier R, and Kourousis K. 2014. Assessment of technical airworthiness in military aviation: implementation and further advancement of the bow-tie model. Proc Eng 80:529–44. doi: 10.1016/j.proeng.2014.09.110
   Google Scholar
• Ribert G, Domingo P, and Vervisch L. 2019. Analysis of sub-grid scale modeling of the ideal-gas equation of state in hydrogen–oxygen premixed flames. Proc Combust Inst 37:2345–51. doi: 10.1016/j.proci.2018.07.054
   Web of Science ®Google Scholar
• Romero-Rochin V, and Bagnato VS. 2005. Thermodynamics of an ideal gas of bosons harmonically trapped: equation of state and susceptibilities. Braz J Phys 35:607–13. doi: 10.1590/S0103-97332005000400004
   Web of Science ®Google Scholar
• Tillova E, Chalupova M, and Kucharikova L. 2017. Quality control of cylinder head casting. Prod Eng Arch 14:3–6. doi: 10.30657/pea.2017.14.01
   Google Scholar
• Vileiniskis M, and Remenyte-Prescott R. 2017. Quantitative risk prognostics framework based on petri net and bow-tie models. Reliab Eng Syst Saf 165:62–73. doi: 10.1016/j.ress.2017.03.026
   Web of Science ®Google Scholar
• Xu Q, and Xu K. 2018. Mine safety assessment using gray relational analysis and bow tie model. PLoS One 13:e0193576. doi: 10.1371/journal.pone.0193576
   PubMed Web of Science ®Google Scholar
• Xu Q, Xu K, Li L, et al. 2018a. Mine safety assessment based on basic event importance: grey relational analysis and bow tie model. R Soc Open Sci 5:180397. doi: 10.1098/rsos.180397
   PubMed Web of Science ®Google Scholar
• Xu Q, Xu K, Li L, et al. 2018b. Safety assessment of petrochemical enterprise using the cloud model, PHA–LOPA and the bow-tie model. R Soc Open Sci 5:180212. doi: 10.1098/rsos.180212
   PubMed Web of Science ®Google Scholar
• Xu Q, Xu K, Yao X, et al. 2018c. Sand casting safety assessment for foundry enterprises: fault tree analysis, Heinrich accident triangle, HAZOP–LOPA, bow tie model. R Soc Open Sci 5:180915. doi: 10.1098/rsos.180915
   PubMed Web of Science ®Google Scholar
• Xu Q, Xu K, Yao X, et al. 2018d. Thermal decomposition characteristics of foundry sand for cast iron in nitrogen atmosphere. R Soc Open Sci 5:181091. doi: 10.1098/rsos.181091
   PubMed Web of Science ®Google Scholar
• Xu Q, and Xu K. 2019. Quality evaluation of Chinese red wine based on cloud model. J Food Biochem 43:e12787. doi: 10.1111/jfbc.12787
   PubMed Web of Science ®Google Scholar
• Xu Q, Xu K, Li L, et al. 2019. Optimization of sand casting performance parameters and missing data prediction. R Soc Open Sci 6:181860. doi: 10.1098/rsos.181860
   PubMed Web of Science ®Google Scholar
• Yakush SE. 2016. Model for blast waves of boiling liquid expanding vapor explosions. Int J Heat Mass Transf 103:173–85. doi: 10.1016/j.ijheatmasstransfer.2016.07.048
   Web of Science ®Google Scholar
• Yan F, and Xu K. 2018. A set pair analysis based layer of protection analysis and its application in quantitative risk assessment. J Loss Prev Process Ind 55:313–9. doi: 10.1016/j.jlp.2018.07.007
   Web of Science ®Google Scholar
• Yan F, and Xu K. 2019. Methodology and case study of quantitative preliminary hazard analysis based on cloud model. J Loss Prev Process Ind 60:116–24. doi: 10.1016/j.jlp.2019.04.013
   Web of Science ®Google Scholar
• Yang J, Shan Z, Zhang Y, et al. 2019. Stabilization and cyclic utilization of chrome leather shavings. Environ Sci Pollut Res 26:4680–9. doi: 10.1007/s11356-018-3687-2
   PubMed Web of Science ®Google Scholar
• Yao X, Zhou H, Xu K, et al. 2020. Investigation on the fusion characterization and melting kinetics of ashes from co-firing of anthracite and pine sawdust. Renewable Energy 145:835–46. doi: 10.1016/j.renene.2019.06.087
   Web of Science ®Google Scholar
• Zhang J, Cliff D, Xu K, et al. 2018. Focusing on the patterns and characteristics of extraordinarily severe gas explosion accidents in Chinese coal mines. Process Saf Environ Prot 117:390–8. doi: 10.1016/j.psep.2018.05.002
   Web of Science ®Google Scholar