QbD approach to downstream processing of spray-dried amorphous solid dispersions – a case study

References

• Agrawal A, Dudhedia M, Deng W, Shepard K, Zhong L, Povilaitis E, Zimny E. 2016. Development of tablet formulation of amorphous solid dispersions prepared by hot melt extrusion using quality by design approach. AAPS PharmSciTech. 17(1):214–232..
   PubMed Web of Science ®Google Scholar
• Allesø M, Holm R, Holm P. 2016. Roller compaction scale-up using roll width as scale factor and laser-based determined ribbon porosity as critical material attribute. Eur J Pharm Sci. 87:69–78.
   PubMed Web of Science ®Google Scholar
• Almaya A, Aburub A. 2008. Effect of particle size on compaction of materials with different deformation mechanisms with and without lubricants. AAPS PharmSciTech. 9(2):414–418.
   PubMed Web of Science ®Google Scholar
• Arndt OR, Kleinebudde P. 2018. Influence of binder properties on dry granules and tablets. Powder Technol. 337:68–77.
   Web of Science ®Google Scholar
• Bühler V. 2005. Vinylpyrrolidone-vinyl acetate copolymer (Copovidone). In: Bühler V, editor. Polyvinylpyrrolidone excipients pharm povidone, crospovidone copovidone. Berlin, Heidelberg: Springer-Verlag; p. 179–220.
   Google Scholar
• Capece M, Ho R, Strong J, Gao P. 2015. Prediction of powder flow performance using a multi-component granular Bond number. Powder Technol. 286:561–571.
   Web of Science ®Google Scholar
• Davis MT, Potter CB, Walker GM. 2018. Downstream processing of a ternary amorphous solid dispersion: the impacts of spray drying and hot melt extrusion on powder flow, compression and dissolution. Int J Pharm. 544(1):242–253.
   PubMed Web of Science ®Google Scholar
• Farber L, Hapgood KP, Michaels JN, Fu X-Y, Meyer R, Johnson M-A, Li F. 2008. Unified compaction curve model for tensile strength of tablets made by roller compaction and direct compression. Int J Pharm. 346(1–2):17–24.
   PubMed Web of Science ®Google Scholar
• Freeman T, Vom H, Hanish M, Brockbank K, Armstrong B. 2016. The influence of roller compaction processing variables on the rheological properties of granules. Asian J Pharm Sci. 11(4):516–527.
   Web of Science ®Google Scholar
• Goh HP, Heng PWS, Liew CV. 2018. Comparative evaluation of powder flow parameters with reference to particle size and shape. Int J Pharm. 547(1–2):133–141.
   PubMed Web of Science ®Google Scholar
• Guigon P, Simon O. 2003. Roll press design—influence of force feed systems on compaction. Powder Technol. 130(1–3):41–48.
   Web of Science ®Google Scholar
• Gupte A, Dehart M, Stagner WC, Haware RV, Gupte A, Dehart M, Stagner WC, Haware RV. 2017. Comparative binder efficiency modeling of dry granulation binders using roller compaction. Drug Dev Ind Pharm. 43(4):574–583.
   PubMed Web of Science ®Google Scholar
• Haef G, Schmidt L, Lakio S, Reynolds G, Ödman J, Tajarobi P. 2019. A systematic study of the impact of changes of roller compactor equipment on granule and tablet properties. Powder Technol. 341:11–22.
   Web of Science ®Google Scholar
• He X, Secreast PJ, Amidon GE. 2007. Mechanistic study of the effect of roller compaction and lubricant on tablet mechanical strength. J Pharm Sci. 96(5):1342–1355.
   PubMed Web of Science ®Google Scholar
• Henriques J, Valente  P, Winters C. 2016. Formulating amorphous solid dispersions: bridging particle engineering and formulation. Am Pharm Rev. https://www.americanpharmaceuticalreview.com/Featured-Articles/331576-Formulating-Amorphous-Solid-Dispersions-Bridging-Particle-Engineering-and-Formulation/.
   Google Scholar
• Honick MA. 2019. Itraconazole-HPMCAS amorphous spray dried dispersions: composition and process factors impacting performance. Baltimore (MA): University of Maryland.
   Google Scholar
• International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. ICH harmonised tripartite guideline impurities: Guideline for residual solvents Q3C(R5). 4 February 2011.
   Google Scholar
• Iyer R, Hegde S, Zhang Y-E, Dinunzio J, Singhal D, Malick A, Amidon G. 2013. The impact of hot melt extrusion and spray drying on mechanical properties and tableting indices of materials used in pharmaceutical development. J Pharm Sci. 102(10):3604–3613.
   PubMed Web of Science ®Google Scholar
• Leane MM, Sinclair W, Qian F, Haddadin R, Brown A, Tobyn M, Dennis AB. 2013. Formulation and process design for a solid dosage form containing a spray-dried amorphous dispersion of ibipinabant. Pharm Dev Technol. 18(2):359–366.
   PubMed Web of Science ®Google Scholar
• Leturia M, Benali M, Lagarde S, Ronga I, Saleh K. 2014. Characterization of flow properties of cohesive powders: a comparative study of traditional and new testing methods. Powder Technol. 253:406–423.
   Web of Science ®Google Scholar
• Leung LY, Mao C, Srivastava I, Du P, Yang CY. 2017. Flow function of pharmaceutical powders is predominantly governed by cohesion, not by friction coefficients. J Pharm Sci. 106(7):1865–1873.
   PubMed Web of Science ®Google Scholar
• Li F, Meyer RF, Chern R. 2006. (203c) Understanding critical parameters in roller compaction process and development of a novel scaling method. In: 2006 Spring Meet 2nd Glob Congr Process Saf Proc. Orlando, FL: American Institute of Chemical Engineering; p. 203c.
   Google Scholar
• Mangal H, Kirsolak M, Kleinebudde P. 2016. Roll compaction/dry granulation: suitability of different binders. Int J Pharm. 503(1–2):213–219.
   PubMed Web of Science ®Google Scholar
• Patel S, Kou X, Hou H(H), Huang Y(B), Strong JC, Zhang GGZ, Sun CC. 2017. Mechanical properties and tableting behavior of amorphous solid dispersions. J Pharm Sci. 106(1):217–223.
   PubMed Web of Science ®Google Scholar
• Perez-Gandarillas L, Perez-Gago A, Mazor A, Kleinebudde P, Lecoq O, Michrafy A. 2016. Effect of roll-compaction and milling conditions on granules and tablet properties. Eur J Pharm Biopharm. 106:38–49.
   PubMed Web of Science ®Google Scholar
• Pitt KG, Heasley MG. 2013. Determination of the tensile strength of elongated tablets. Powder Technol. 238(February):169–175.
   Web of Science ®Google Scholar
• Shi L, Chattoraj S, Sun CC. 2011. Reproducibility of flow properties of microcrystalline cellulose – Avicel PH102. Powder Technol. 212(1):253–257.
   Web of Science ®Google Scholar
• Singh A, De Bisschop C, Schut H, Van Humbeeck J, Van Den Mooter G. 2015. Compression effects on the phase behaviour of miconazole-poly (1-vinylpyrrolidone-co-vinyl acetate) solid dispersions-role of pressure, dwell time, and preparation method. J Pharm Sci. 104(10):3366–3376.
   PubMed Web of Science ®Google Scholar
• Soares LAL, Ortega GG, Petrovick PR, Schmidt PC. 2005. Dry granulation and compression of spray-dried plant extracts. AAPS PharmSciTech. 6(3):E359–366.
   PubMed Web of Science ®Google Scholar
• Sun C, Himmelspach MW. 2006. Reduced tabletability of roller compacted granules as a result of granule size enlargement. J Pharm Sci. 95(1):200–206.
   PubMed Web of Science ®Google Scholar
• Sun CC. 2010. Setting the bar for powder flow properties in successful high speed tableting. Powder Technol. 201(1):106–108.
   Web of Science ®Google Scholar
• Sun CC, Kleinebudde P. 2016. Mini review: mechanisms to the loss of tabletability by dry granulation. Eur J Pharm Biopharm. 106:9–14.
   PubMed Web of Science ®Google Scholar
• Sun WJ, Rantanen J, Sun CC. 2018. Ribbon density and milling parameters that determine fines fraction in a dry granulation. Powder Technol. 338:162–167.
   Web of Science ®Google Scholar
• Sun WJ, Sun CC. 2017. Ribbon thickness influences fine generation during dry granulation. Int J Pharm. 529(1–2):87–88.
   PubMed Web of Science ®Google Scholar
• Velasquez AA, Mattiazzi J, Ferreira LM, Pohlmann L, Silva CB, Rolim CMB, Cruz L, Velasquez AA, Mattiazzi J, Ferreira LM. 2014. Risedronate-loaded Eudragit S100 microparticles formulated into tablets. Pharm Dev Technol. 19(3):263–268.
   PubMed Web of Science ®Google Scholar
• Vig B, Morgen M. 2017. Formulation, process development, and scale-up: spray-drying amorphous solid dispersions for insoluble Drugs. In: Dev solid oral dos forms. London, UK; Oxford, UK; San Diego, CA; Cambridge, MA: Elsevier Inc.; p. 793–820.
   Google Scholar
• Williams III RO, Watts AB, Miller DA, editors. 2012. Formulating poorly water soluble drugs. New York, NY: Sprinter Verlag.
   Google Scholar
• Worku ZA, Kumar D, Gomes JV, He Y, Glennon B, Ramisetty KA, Rasmuson ÅC, O'Connell P, Gallagher KH, Woods T, et al. 2017. Modelling and understanding powder flow properties and compactability of selected active pharmaceutical ingredients, excipients and physical mixtures from critical material properties. Int J Pharm. 531(1):191–204.
   PubMed Web of Science ®Google Scholar
• Yu W, Muteki K, Zhang L, Kim G. 2011. Prediction of bulk powder flow performance using comprehensive particle size and particle shape distributions. J Pharm Sci. 100(1):284–293.
   PubMed Web of Science ®Google Scholar