Solid amorphous formulations for enhancing solubility and inhibiting Erlotinib crystallization during gastric-to-intestinal transfer

References

• Baird JA, Taylor LS. 2012. Evaluation of amorphous solid dispersion properties using thermal analysis techniques. Adv Drug Deliv Rev. 64(5):396–421. doi:10.1016/j.addr.2011.07.009.
   PubMed Web of Science ®Google Scholar
• Beyerinck RA, Ray RJ, Dobry DE, Settell DM. 2010. Method for making homogeneous spray-dried solid amorphous drug dispersions using pressure nozzles (United States Patent No. US7780988B2).
   Google Scholar
• Bhattacharya S, Suryanarayanan R. 2009. Local mobility in amorphous pharmaceuticals—characterization and implications on stability. J Pharm Sci. 98(9):2935–2953. doi:10.1002/jps.21728.
   PubMed Web of Science ®Google Scholar
• Cabral H, Kataoka K. 2014. Progress of drug-loaded polymeric micelles into clinical studies. J Control Release. 190:465–476. doi:10.1016/j.jconrel.2014.06.042.
   PubMed Web of Science ®Google Scholar
• Davis MT, Potter CB, Walker GM. 2018. Downstream processing of a ternary amorphous solid dispersion: the impacts of spray drying and hot melt extrusion on powder flow, compression and dissolution. Int J Pharm. 544(1):242–253. doi:10.1016/j.ijpharm.2018.04.038.
   PubMed Web of Science ®Google Scholar
• Descamps M, Willart JF, Dudognon E, Caron V. 2007. Transformation of pharmaceutical compounds upon milling and comilling: the role of Tg. J Pharm Sci. 96(5):1398–1407. doi:10.1002/jps.20939.
   PubMed Web of Science ®Google Scholar
• Djuris J, Nikolakakis I, Ibric S, Djuric Z, Kachrimanis K. 2013. Preparation of carbamazepine–Soluplus® solid dispersions by hot-melt extrusion, and prediction of drug–polymer miscibility by thermodynamic model fitting. Eur J Pharm Biopharm. 84(1):228–237. doi:10.1016/j.ejpb.2012.12.018.
   PubMed Web of Science ®Google Scholar
• Ghebremeskel AN, Vemavarapu C, Lodaya M. 2007. Use of surfactants as plasticizers in preparing solid dispersions of poorly soluble API: selection of polymer–surfactant combinations using solubility parameters and testing the processability. Int J Pharm. 328(2):119–129. doi:10.1016/j.ijpharm.2006.08.010.
   PubMed Web of Science ®Google Scholar
• Greenhalgh DJ, Williams AC, Timmins P, York P. 1999. Solubility parameters as predictors of miscibility in solid dispersions. J Pharm Sci. 88(11):1182–1190. doi:10.1021/js9900856.
   PubMed Web of Science ®Google Scholar
• Guan Q, Ma Q, Zhao Y, Jiang X, Zhang H, Liu M, Wang Z, Han J. 2021. Cellulose derivatives as effective recrystallization inhibitor for ternary ritonavir solid dispersions: in vitro-in vivo evaluation. Carbohydr Polym. 273:118562. doi:10.1016/j.carbpol.2021.118562.
   PubMed Web of Science ®Google Scholar
• Han R, Xiong H, Ye Z, Yang Y, Huang T, Jing Q, Lu J, Pan H, Ren F, Ouyang D. 2019. Predicting physical stability of solid dispersions by machine learning techniques. J Control Release. 311–312:16–25. doi:10.1016/j.jconrel.2019.08.030.
   PubMed Web of Science ®Google Scholar
• Huang L, Gao S. 2009. Hydrochloride and its solid amorphous dispersion.
   Google Scholar
• Jahangiri A, Khalilzad F, Barghi L. 2022. Dissolution improvement of binary solid dispersions of erlotinib prepared by one-step electrospray method. Biol Methods Protoc. 7(1):bpac001. doi:10.1093/biomethods/bpac001.
   PubMedGoogle Scholar
• Kalepu S, Nekkanti V. 2015. Insoluble drug delivery strategies: review of recent advances and business prospects. Acta Pharm Sin B. 5(5):442–453. doi:10.1016/j.apsb.2015.07.003.
   PubMed Web of Science ®Google Scholar
• Mahmah O, Tabbakh R, Kelly A, Paradkar A. 2014. A comparative study of the effect of spray drying and hot-melt extrusion on the properties of amorphous solid dispersions containing felodipine. J Pharm Pharmacol. 66(2):275–284. doi:10.1111/jphp.12099.
   PubMed Web of Science ®Google Scholar
• Meena K, Choudhary D. 2019. Enhancement of solubility and dissolution rate of erlotinib hydrochloride by solid dispersion technique with poloxamer 188: preparation and in-vitro evaluation.
   Google Scholar
• Miller DA, DiNunzio JC, Yang W, McGinity JW, Williams RO. 2008. Enhanced in vivo absorption of itraconazole via stabilization of supersaturation following acidic-to-neutral pH transition. Drug Dev Ind Pharm. 34(8):890–902. doi:10.1080/03639040801929273.
   PubMed Web of Science ®Google Scholar
• Miller WK, Morgen MM. 2014. Solid dispersions of low-water solubility actives (World Intellectual Property Organization Patent No. WO2014126969A1). https://patents.google.com/patent/WO2014126969A1/en?oq=2014/126969.
   Google Scholar
• Mudie DM, Buchanan S, Stewart AM, Smith A, Shepard KB, Biswas N, Marshall D, Ekdahl A, Pluntze A, Craig CD, et al. 2020. A novel architecture for achieving high drug loading in amorphous spray dried dispersion tablets. Int J Pharm X. 2:100042. doi:10.1016/j.ijpx.2020.100042.
   PubMedGoogle Scholar
• Otsuka N, Ueda K, Ohyagi N, Shimizu K, Katakawa K, Kumamoto T, Higashi K, Yamamoto K, Moribe K. 2015. An insight into different stabilization mechanisms of phenytoin derivatives supersaturation by HPMC and PVP. J Pharm Sci. 104(8):2574–2582. doi:10.1002/jps.24527.
   PubMed Web of Science ®Google Scholar
• Palmelund H, Madsen CM, Plum J, Müllertz A, Rades T. 2016. Studying the propensity of compounds to supersaturate: a practical and broadly applicable approach. J Pharm Sci. 105(10):3021–3029. doi:10.1016/j.xphs.2016.06.016.
   PubMed Web of Science ®Google Scholar
• Repka MA, McGinity JW. 2000. Influence of vitamin E TPGS on the properties of hydrophilic films produced by hot-melt extrusion. Int J Pharm. 202(1–2):63–70. doi:10.1016/S0378-5173(00)00418-X.
   PubMed Web of Science ®Google Scholar
• Sarode AL, Sandhu H, Shah N, Malick W, Zia H. 2013. Hot melt extrusion (HME) for amorphous solid dispersions: predictive tools for processing and impact of drug–polymer interactions on supersaturation. Eur J Pharm Sci. 48(3):371–384. doi:10.1016/j.ejps.2012.12.012.
   PubMed Web of Science ®Google Scholar
• Sawicki E, Schellens JHM, Beijnen JH, Nuijen B. 2016. Inventory of oral anticancer agents: pharmaceutical formulation aspects with focus on the solid dispersion technique. Cancer Treat Rev. 50:247–263. doi:10.1016/j.ctrv.2016.09.012.
   PubMed Web of Science ®Google Scholar
• Schram CJ, Taylor LS, Beaudoin SP. 2015. Influence of polymers on the crystal growth rate of felodipine: correlating adsorbed polymer surface coverage to solution crystal growth inhibition. Langmuir. 31(41):11279–11287. doi:10.1021/acs.langmuir.5b02486.
   PubMed Web of Science ®Google Scholar
• Shi N-Q, Zhang Y, Li Y, Lai H-W, Xiao X, Feng B, Qi X-R. 2017. Self-micellizing solid dispersions enhance the properties and therapeutic potential of fenofibrate: advantages, profiles and mechanisms. Int J Pharm. 528(1–2):563–577. doi:10.1016/j.ijpharm.2017.06.017.
   PubMedGoogle Scholar
• Sun DD, Wen H, Taylor LS. 2016. Non-sink dissolution conditions for predicting product quality and in vivo performance of supersaturating drug delivery systems. J Pharm Sci. 105(9):2477–2488. doi:10.1016/j.xphs.2016.03.024.
   PubMed Web of Science ®Google Scholar
• Suryanarayana C. 2001. Mechanical alloying and milling. Prog Mater Sci. 46(1):1–184. doi:10.1016/S0079-6425(99)00010-9.
   Web of Science ®Google Scholar
• Szafraniec-Szczęsny J, Antosik-Rogóż A, Kurek M, Gawlak K, Górska A, Peralta S, Knapik-Kowalczuk J, Kramarczyk D, Paluch M, Jachowicz R. 2021. How does the addition of Kollidon®VA64 inhibit the recrystallization and improve ezetimibe dissolution from amorphous solid dispersions? Pharmaceutics. 13(2):147. doi:10.3390/pharmaceutics13020147.
   PubMed Web of Science ®Google Scholar
• Thiry J, Lebrun P, Vinassa C, Adam M, Netchacovitch L, Ziemons E, Hubert P, Krier F, Evrard B. 2016. Continuous production of itraconazolebased solid dispersions by hot melt extrusion: Preformulation, optimization and design space determination. International Journal of Pharmaceutics. 515(1): 114–124. doi: 10.1016/j.ijpharm.2016.10.003.
   Google Scholar
• Van Krevelen DW, Te Nijenhuis K. 2009. Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions. Chapter 7 - Cohesive Properties and Solubility, Pages 189-227, ISBN 978-0-08-054819-7 (Fourth edition) Elsevier.
   Google Scholar
• Walsh D, Serrano DR, Worku ZA, Madi AM, O'Connell P, Twamley B, Healy AM. 2018. Engineering of pharmaceutical cocrystals in an excipient matrix: spray drying versus hot melt extrusion. Int J Pharm. 551(1-2):241–256. doi:10.1016/j.ijpharm.2018.09.029.
   PubMedGoogle Scholar
• Williams HD, Ford L, Han S, Tangso KJ, Lim S, Shackleford DM, Vodak DT, Benameur H, Pouton CW, Scammells PJ, et al. 2018. Enhancing the oral absorption of kinase inhibitors using lipophilic salts and lipid-based formulations. Mol Pharm. 15(12):5678–5696. doi:10.1021/acs.molpharmaceut.8b00858.
   PubMedGoogle Scholar
• Williams HD, Trevaskis NL, Charman SA, Shanker RM, Charman WN, Pouton CW, Porter, CJ, H. 2013. Strategies to address low drug solubility in discovery and development. Pharmacol Rev. 65(1):315–499. doi:10.1124/pr.112.005660.
   PubMed Web of Science ®Google Scholar
• Wlodarski K, Sawicki W, Haber K, Knapik J, Wojnarowska Z, Paluch M, Lepek P, Hawelek L, Tajber L. 2015. Physicochemical properties of tadalafil solid dispersions – Impact of polymer on the apparent solubility and dissolution rate of tadalafil. Eur J Pharm Biopharm. 94:106–115. doi:10.1016/j.ejpb.2015.04.031.
   PubMed Web of Science ®Google Scholar
• World Health Organization. 2015 Feb 3. Cancer. https://www.who.int/en/news-room/fact-sheets/detail/cancer.
   Google Scholar
• Xia D, Yu H, Tao J, Zeng J, Zhu Q, Zhu C, Gan Y. 2016. Supersaturated polymeric micelles for oral cyclosporine A delivery: the role of Soluplus–sodium dodecyl sulfate complex. Colloids Surf B Biointerfaces. 141:301–310. doi:10.1016/j.colsurfb.2016.01.047.
   PubMed Web of Science ®Google Scholar
• Xie T, Taylor LS. 2016. Improved release of celecoxib from high drug loading amorphous solid dispersions formulated with polyacrylic acid and cellulose derivatives. Mol Pharm. 13(3):873–884. doi:10.1021/acs.molpharmaceut.5b00798.
   PubMedGoogle Scholar
• Zhang Q, Zhao Y, Zhao Y, Ding Z, Fan Z, Zhang H, Liu M, Wang Z, Han J. 2018. Effect of HPMCAS on recrystallization inhibition of nimodipine solid dispersions prepared by hot-melt extrusion and dissolution enhancement of nimodipine tablets. Colloids Surf B Biointerfaces. 172:118–126. doi:10.1016/j.colsurfb.2018.08.030.
   PubMed Web of Science ®Google Scholar