FINITE DIFFERENCE METHOD-BASED SIMULATION OF TEMPERATURE FIELDS FOR APPLICATION TO ORTHOGONAL CUTTING WITH COATED TOOLS

REFERENCES

• Komanduri , R. and Hou , Z.B. ( 2001 ). Analysis of Heat Partition and Temperature Distribution in Sliding Systems . Wear , 251 , 925 – 938 . [CSA]
   Web of Science ®Google Scholar
• van Luttervelt , C.A. , Childs , T.H.C. , Jawahir , I.S. , Klocke , F. , and Venuvinod , P.K. ( 1998 ). Present Situation and Future Trends in Modelling of Machining Operations. Progress Report of the CIRP Working Group “Modelling of Machining Operations. ” Annals of the CIRP , 47 ( 2 ): 587 – 626 . [CSA]
   Google Scholar
• Lazoglu , I. and Altintas , Y. ( 2002 ). Prediction of Tool and Chip Temperature in Continuous and Interrupted Machining . Int. J. Mach. Tools Manufact. , 42 , 1011 – 1022 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Athavale , S.M. and Strenkowski , J.S. ( 1998 ). Finite Element Modeling of Machining: From Proof-of-Concept to Engineering Applications . Int. J. Mach. Sci. Technol. , 2 ( 2 ): 317 – 342 . [CSA]
   Web of Science ®Google Scholar
• Kwon , P. , Schiemann , T. , and Kountanya , R. ( 2001 ). An Inverse Estimation Scheme to Measure Steady-State Tool-Chip Interface Temperatures Using an Infrared Camera . Int. J. Mach. Tools Manufact. , 41 , 1015 – 1030 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Smith , A.J.R. and Armarego , E.J.A. ( 1981 ). Temperature Prediction in Orthogonal Cutting with a Finite Difference Approach . Annals of the CIRP , 30 ( 1 ): 9 – 13 . [CSA]
   Google Scholar
• Aluwihare , C.B. , Armarego , E.J.A. , and Smith , A.J.R. ( 2000 ). A Predictive Model for Temperature Distributions in “Classical” Orthogonal Cutting . Trans. of NAMRI/SME , 28 , 131 – 136 . [CSA]
   Google Scholar
• Jaspers , S.P.F.C. , Dautzenberg , J.H. , and Taminiau , D.A. ( 1998 ). Temperature Measurement in Orthogonal Metal Cutting . Int. J. Adv. Manuf. Technol. , 14 , 7 – 12 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Obikawa , T. , Matsumura , T. , Shirakashi , T. , and Usui , E. ( 1997 ). Wear Characteristics of Alumina Coated and Alumina Ceramic Tools . J. Mat. Proc. Technol. , 63 , 211 – 216 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Altintas , Y. ( 2000 ). Modeling Approaches and Software for Predicting the Performance of Milling Operations at MAL-UBC . Int. J. Mach. Sci. Technol. , 4 ( 3 ): 445 – 478 . [CSA]
   Web of Science ®Google Scholar
• Davies , M.A. , Cao , Q. , Cooke , A.L. , and Ivester , R. ( 2003 ). On the Measurement and Prediction of Temperature Fields in Machining AISI 1045 Steel . Annals of the CIRP , 52 ( 1 ): 77 – 80 . [CSA]
   Web of Science ®Google Scholar
• Grzesik , W. ( 2000 ). The Influence of Thin Hard Coatings on Frictional Behaviour in the Orthogonal Cutting Process . Tribol. Int. , 33 , 131 – 140 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Grzesik , W. ( 1999 ). Experimental Investigation of the Cutting Temperature when Turning with Coated Indexable Inserts . Int. J. Mach. Tools Manufact. , 39 , 355 – 369 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Grzesik , W. and Nieslony , P. ( 2003 ). A Computational Approach to Evaluate Temperature and Heat Partition in Machining with Multilayer Coated Tools . Int. J. Mach. Tools Manufact. , 43 , 1311 – 1317 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Yen , Y.-C. , Jain , A. , Chigurupati , P. , Wu , W.-T. , and Altan , T. , (2003). Computer Simulation of Orthogonal Cutting Using a Tool with Multiple Coatings. Proceedings of the 6th CIRP Int. Workshop on Modeling of Machining, Hamilton, 119–130.
   Google Scholar
• Balaji , A.K. and Mohan , V.S. ( 2002 ). An “Effective Cutting Tool Thermal Conductivity” Based Model for Tool-Chip Contact in Machining with Multi-Layer Coated Cutting Tools . Int. J. Mach. Sci. Technol. , 6 ( 3 ): 415 – 436 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Carslaw , H.S. and Jaeger , J.C. ( 1980 ). Conduction of Heat in Solids . Oxford University Press , Oxford .
   Google Scholar
• Young , H.T. and Chou , T.L. ( 1994 ). Modelling of Tool/Chip Interface Temperature Distribution in Metal Cutting . Int. J. Mech. Sci. , 36 , 931 – 943 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Boothroyd , G. and Knight , W.A. ( 1989 ). Fundamentals of Machining and Machine Tools . Marcel Dekker , New York .
   Google Scholar
• Tlusty , J. ( 1999 ). Manufacturing Processes and Equipment . Prentice-Hall Intl. , Englewood Cliffs , NJ .
   Google Scholar
• Grzesik , W. ( 2001 ). An Investigation of the Thermal Effects in Orthogonal Cutting Associated with Multilayer Coatings . Annals of the CIRP , 50 ( 1 ): 53 – 56 . [CSA]
   Web of Science ®Google Scholar
• M'saoubi , R. and Chandrasekaran , H. ( 2004 ). Investigation of the Effects of Tool Micro-Geometry and Coating on Tool Temperature During Orthogonal Turning of Quenched and Tempered Steel . Int. J. Mach. Tools Manufact. , 44 , 213 – 224 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Lim , C.Y.H. , Lau , P.P.T. , and Lim , S.C. ( 2001 ). Work Material and the Effectiveness of Coated Tools . Surface and Coatings Technology , 146–147 : 298 – 304 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• El-Wardany , T.I. , Mohammed , E. , and Elbestawi , M.A. ( 1996 ). Cutting Temperature of Ceramic Tools in High Speed Machining of Difficult-to-Cut Materials . Int. J. Mach. Tools Manufact. , 36 , 611 – 634 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Ezugwu , E.O. , Olajire , K.A. , and Jawaid , A. ( 2001 ). Wear Performance of Multilayer-Coated Carbide Tools . Int. J. Mach. Sci. Technol. , 5 ( 1 ): 115 – 129 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Grzesik , W. and Nieslony , P. ( 2003 ). Thermophysical-Property Based Selection of Tool Protective Coatings for Dry Machining of Steels . ASME J. Manuf. Sci. Eng. , 125 , 689 – 695 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar