SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS

REFERENCES

• Arunachalam , R.M. ; Mannan , M.A. ; Spowage , A.C. ( 2004a ) Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools . International Journal of Machine Tools & Manufacturing , 44 : 879 – 887 .
   Web of Science ®Google Scholar
• Arunachalam , R.M. ; Mannan , M.A. ; Spowage , A.C. ( 2004b ) Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools . International Journal of Machine Tools & Manufacture , 44 : 1481 – 1491 .
   Web of Science ®Google Scholar
• Aspinwall , D.K. ; Dewes , R.C. ; Ng , E.-G. ; Sage , C. ; Soo , S.L. ( 2007 ) The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions . International Journal of Machine Tools & Manufacture , 47 : 1839 – 1846 .
   Web of Science ®Google Scholar
• Axinte , D.A. ; Dewes , R.C. ( 2002 ) Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models . Journal of Materials Processing Technology , 127 : 325 – 335 .
   Web of Science ®Google Scholar
• Bammann , D.J. ( 1990 ) Modeling temperature and strain rate dependent large deformation of metals . Appl. Mech. Rev. , 43 : 312 – 319 .
   Google Scholar
• Bammann , D.J. ; Chiesa , M.L. ; Johnson , G.C. : ( 1996 ) Modeling large deformation and failure in manufacturing process . In: Tatsumi , T. , Wannabe , E. , Kambe , T. (eds.), Theor. App. Mech. ; pp. 359 – 376 .
   Google Scholar
• Barash , M.M. ; Schoech , W.J. : ( 1972 ) A semi-analytical model of the residual stress zone in orthogonal machining . Proc. 11th Int. MTDR Conf. , Pergamon Press , London .
   Google Scholar
• Behrens , A. ; Kalisch , K. ; Wulfsberg , J.P. : ( 2004 ) Possibilities and problems of finite element simulation of high speed cutting mechanics . ASME/IMECE , MED , Anaheim , CA .
   Google Scholar
• Benson , D.J. ( 1997 ) A mixture theory for contact in multi-material Eulerian formulations . Comput. Methods Appl. Mech. Engr. , 140 : 59 – 86 .
   Web of Science ®Google Scholar
• Brinksmeier , E. ; Cammett , J.T. ; Konig , W. ; Leskovar , P. ; Peters , J. ; Tonshoff , H.K. ( 1982 ) Residual stresses-measurement and causes in machining processes . Annals of the CIRP , 31 ( 2 ): 491 – 510 .
   Google Scholar
• Brinksmeier , E. ; Schneider , E. ; Theiner , W.A. ; Tönshoff , H.K. ( 1984 ) Nondestructive testing for evaluating surface integrity . Annals of the CIRP , 33 ( 2 ): 489 – 509 .
   Google Scholar
• Campbell , J.D. ( 1973 ) Dynamic plasticity: macroscopic and microscopic aspects . Mater. Sci. Eng. , 12 : 3 – 21 .
   Google Scholar
• Chandrasekaran , H. ; M'Saoubi , R. ; Högman , B. ; Nordh , L.G. ; Coulon , B. ; Lebrun , J.L. ; Viale , D. ; Gitton , S. ; Montero , M.C. ; Marques , M.J. ; Outeiro , J.C. ; Dias , A.M. : ( 2005 ) Development of machinability enhanced tool steels for improved product economy in hard milling . In: Technical Steel Research-Report EUR 21726 , EC, Brussels.
   Google Scholar
• Chuzhoy , L. ; DeVor , R.E. ; Kapoor , S.G. ; Beaudoin , A.J. ; Bammann , D.J. ( 2003 ) Machining simulation of ductile iron and its constituents, Part 2: numerical simulation and experimental validation of machining . ASME J. Manuf. Sci. Eng. , 125 : 192 – 201 .
   Web of Science ®Google Scholar
• Colwell , L.V. ; Sinnot , M.J. ; Tobin , J.C. ( 1955 ) The determination of residual stresses in hardened, ground steel . Trans. ASME , 77 : 1099 – 1105 .
   Google Scholar
• Copper , D. : ( 2006 ) Machining capacity, expertise must grow . In: SME/Aerospace & Defense Manufacturing, Manuf. Eng. , 63 – 65 .
   Google Scholar
• Dahlman , P. ; Gunnberg , F. ; Jacobson , M. ( 2004 ) The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning . Journal of Materials Processing Technology , 147 : 181 – 184 .
   Web of Science ®Google Scholar
• Devarajan , N. ; Asundi , M.K. ; Somasundaram , S. : ( 1984 ) Experimental method for predicting residual stresses due to turning in stainless steel . In: Experimental Techniques , August , 22 – 26 .
   Google Scholar
• Doman , D.A. ; Warkentin , A. ; Bauer , R. (2009) Finite element modeling approaches in grinding. International Journal of Machine Tools & Manufacture , 49: 109–116.
   Web of Science ®Google Scholar
• Dornfeld , D. ; Min , S. ; Takeuchi , Y. ( 2006 ) Recent advances in mechanical micromachining . Annals of the CIRP , 55/2 : 1 – 24 .
   Web of Science ®Google Scholar
• Ee , K.C. ; Dillon , Jr . O.W. ; Jawahir , I.S. ( 2005 ) Finite element modeling of residual stresses in machining induced by cutting tool with a finite edge radius . Int. J. Mech. Sci. , 47 : 1611 – 1628 .
   Web of Science ®Google Scholar
• Elbestawi , M.A. ; Chen , L. ; Becze , C.E. ; El-Wardany , T.I. ( 1997 ) High-speed milling of dies and molds in their hardened state . Annals of the CIRP , 46/1 : 57 – 62 .
   Google Scholar
• El-Khabeery , M.M. ; Fattouh , M. ( 1989 ) Residual stress distribution caused by milling . International Journal of Machine Tools & Manufacture , 29 : 391 – 401 .
   Web of Science ®Google Scholar
• Ezugwu , E.O. ( 2005 ) Key improvements in the machining of difficult-to-cut aerospace superalloys . Int. J. Machine Tools & Manufacture , 45 : 1353 – 1367 .
   Web of Science ®Google Scholar
• Field , M. ; Kahles , J.F. ( 1964 ) The surface integrity of machined and ground high strength steels . DMIC Report , 210 : 54 – 77 .
   Google Scholar
• Field , M. ; Kahles , J.F. ( 1971 ) Review of surface integrity of machined components . Annals of the CIRP , 20 ( 2 ): 153 – 162 .
   Google Scholar
• Field , M. ; Koster , W.P. ; Kohls , J.B. ; Snider , R.E. ; Maranchik , Jr ., J. : ( 1970 ) Machining of high strength steels with emphasis on surface integrity . In: Tech. Report AFMDC 70-1 , Metcut Research Associates, Inc.
   Google Scholar
• Follansbee , P.S. ; Kocks , U.F. ( 1988 ) A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable . Acta Metall. , 36 : 81 – 93 .
   Google Scholar
• Goldstein , M. : ( 1991 ) Optimierung der Fertigungsfolge ‘kaltfließpressen-spanen’ durch hartdrehen als feinbearbeitungsverfahren für einsatzgehärtete preß-bauteile. Doctoral thesis, RWTH Aachen. .
   Google Scholar
• Guo , Y.B. : ( 2000 ) Finite Element Analysis of Superfinish Hard Turning . Ph.D. Dissertation , Purdue University , West Lafayette , Indiana .
   Google Scholar
• Guo , Y.B. ( 2003 ) An integral method to determine the mechanical behavior of materials in metal cutting . J. Mater. Proc. Tech. , 142 ( 1 ): 72 – 81 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Anurag , S. ( 2008 ) Finite element modeling and simulation of micromachining random multiphase materials . Trans. NAMRI/SME , 36 : 373 – 380 .
   Google Scholar
• Guo , Y.B. ; Anurag , S. ; Jawahir , I.S. ( 2009 ) A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning . Annals of the CIRP , 58 ( 1 ): 81 – 84 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Liu , C.R. ( 2002a ) Mechanical properties of hardened AISI 52100 steel in hard machining . ASME J. Manuf. Sci. Eng. , 124 : 1 – 9 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Liu , C.R. ( 2002b ) FEM analysis of mechanical state on sequentially machined surfaces . Machining Science and Technology , 6 : 21 – 41 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Liu , C.R. ( 2002c ) 3D FEA modeling of hard turning . Journal of Manufacturing Science and Engineering , 124 : 189 – 199 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Wen , Q. ( 2005 ) A hybrid approach to investigate chip morphology transition from saw-tooth to discontinuous chips with the effects of cutting edge geometry . Trans. of NAMRI/SME , XXXIII : 469 – 476 .
   Google Scholar
• Guo , Y.B. ; Wen , Q. ; Horstemeyer , M.F. ( 2005 ) An internal state variable plasticity based approach to determine dynamic loading history effects on material property in manufacturing processes . Int. J. Mech. Sci. , 47 : 1423 – 1441 .
   Web of Science ®Google Scholar
• Guo , Y.B. ; Yen , D.W. ( 2003 ) A FEM study on mechanisms of discontinuous chip formation in hard machining . J. of Materials Proc. Tech. , 155 : 1350 – 1356 .
   Web of Science ®Google Scholar
• Henriksen , E.K. ( 1951 ) Residual stresses in machined surfaces . Trans. ASME , 73 : 69 – 76 .
   Google Scholar
• Hong , H. ; Riga , A.T. ; Cahoon , J.M. ( 1993 ) Machinability of steels and titanium alloys under lubrication . Wear , 162 : 34 – 39 .
   Web of Science ®Google Scholar
• Hou , Z.B. ; Komanduri , R. ( 1997 ) Modeling of thermomechanical shear instability in machining . Int. J. Mech. Sci. , 39 : 1273 – 1314 .
   Web of Science ®Google Scholar
• Hsu , H.C. : ( 1992 ) An Elasto-Viscoplastic Finite Element Model of Orthogonal Metal Cutting for Residual Stress Prediction. Ph.D. Dissertation , North Carolina State University , Rayleigh , USA .
   Google Scholar
• Hughes , J.I. ; Sharman , A.R.C. ; Ridgway , K. ( 2005 ) The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity . Proc. IMechE, Part B: Journal of Engineering Manufacture , 220 : 93 – 107 .
   Web of Science ®Google Scholar
• Jeelani , S. ; Bailey , J.A. (1986) Residual stress distribution in machining annealed 18 percent nickel maraging steel. ASME Journal of Engineering Materials and Technology , 108: 93–98.
   Web of Science ®Google Scholar
• Jeelani , S. ; Biswas , S. ; Natarajan , R. : ( 1986 ) Effect of cutting speed and tool rake angle on residual stress distribution in machining 2024-T351 aluminium alloy: a study of cumulative fatigue damage in AISI 4130 steel . J. of Material Science , 21 : 2705 – 2710 .
   Google Scholar
• Johnson , G.R. ; Cook , W.H. ( 1985 ) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures . Eng. Frac. Mech. , 21 : 31 – 48 .
   Web of Science ®Google Scholar
• Kahles , J.F. ; Field , M. ; Eylon , D. ; Froes , F.H. ( 1985 ) Machining of titanium alloys . Journal of Metals , 37 : 27 – 35 .
   Google Scholar
• Klocke , F. ; Brinksmeier , E. ; Weinert , K. ( 2005 ) Capability profiles of hard cutting and grinding processes . Annals of the CIRP , 54 ( 2 ): 557 – 580 .
   Web of Science ®Google Scholar
• Konig , W. ; Klinger , M. ; Link , R. ( 1990 ) Machining hard materials with geometrically defined cutting edges-field of applications and limitations . Annals of the CIRP , 39 ( 1 ): 61 – 64 .
   Google Scholar
• Koster , W.P. ; Filed , M. ; Fritz , L.J. ; Gatto , L.R. ; Kahles , J.F. : ( 1970 ) Surface integrity of machined structural components . Tech. Report AFML-TR-70-11 , Metcut Research Associates, Inc.
   Google Scholar
• Liu , C.R. ; Barash , M.M. ( 1976a ) The mechanical state of the sublayer of a surface generated by chip-removal process, Part 1: cutting with a sharp tool . Trans. ASME, J. Eng. Ind. , 98 ( 4 ): 1192 – 1201 .
   Google Scholar
• Liu , C.R. ; Barash , M.M. ( 1976b ) The mechanical state of the sublayer of a surface generated by chip-removal process, Part 2: cutting with a tool with flank wear . Trans. ASME, J. Eng. Ind. , 98/4 : 1202 – 1208 .
   Google Scholar
• Liu , C.R. ; Barash , M.M. ( 1982 ) Variables governing patterns of mechanical residual stress in a machined surface . Trans. ASME, J. Eng. Ind. , 104 ( 3 ): 257 – 264 .
   Google Scholar
• Liu , C.R. ; Guo , Y.B. ( 2000 ) Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer . International Journal of Mechanical Sciences , 42 : 1069 – 1086 .
   Web of Science ®Google Scholar
• Lu , J. : ( 1996 ) Handbook of Measurement of Residual Stresses . The Fairmont Press, Inc. , Lilburn , GA .
   Google Scholar
• Lucca , D.A. ; Brinksmeier , E. ; Goch , G. ( 1998 ) Progress in assessing surface and subsurface integrity . Annals of the CIRP , 47 ( 2 ): 669 – 693 .
   Google Scholar
• Maekawa , K. ; Shirakashi , T. ; Usui , E. ( 1983 ) Flow stress of low carbon steel at high temperature and strain rate, Part 2: flow stress under variable temperature and variable strain rate . Bull. Japan Soc. Prec. Eng. , 17 : 167 – 172 .
   Web of Science ®Google Scholar
• Marques , M.J. ; Outeiro , J.C. ; Dias , A.M. ; M'Saoubi , R. ; Chandrasekaran , H. : ( 2006 ) Surface integrity of H13 ESR mould steel milled by carbide and CBN tools . Materials Science Forum : 514 – 516 , 564–568.
   Google Scholar
• Matsumoto , Y. ; Barash , M.M. ; Liu , C.R. ( 1986 ) Effect of hardness on the surface integrity of AISI 4340 steel . Journal of Engineering for Industry , 108 : 169 – 175 .
   Google Scholar
• Matsumoto , Y. ; Hashimoto , F. ; Lahoti , G. ( 1999 ) Surface integrity generated by precision hard turning . Annals of the CIRP , 48 ( 1 ): 59 – 62 .
   Google Scholar
• Movahhedy , M.R. ; Altintas , Y. ; Gadala , M.S. ( 2002 ) Numerical analysis of metal cutting with chamfered and blunt tools . J. Manuf. Sci. Eng. , 124 : 178 – 188 .
   Web of Science ®Google Scholar
• M'Saoubi , R. ; Outeiro , J.C. ; Chandrasekaran , H. ; Dillon , Jr . O.W. ; Jawahir , I.S. ( 2008 ) A review of surface integrity in machining and its impact on functional performance and life of machined products . Int. J. Sustainable Manufacturing , 1 ( 1–2 ): 203 – 236 .
   Google Scholar
• Narutaki , N. ; Murakoshi , A. ; Motonishi , S. ( 1983 ) Study on machining of titanium alloys . Annals of the CIRP , 32 ( 1 ): 65 – 69 .
   Google Scholar
• Nasr, Mohamed N.A. ; Ng , E.-G. ; Elbestawi , M.A. ( 2007 ) Modeling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316 L . International Journal of Machine Tools & Manufacture , 47 : 401 – 411 .
   Web of Science ®Google Scholar
• Obikawa , T. ; Sasahara , H. ; Shirakashi , T. ( 1997 ) Application of computational machining method to discontinuous chip formation . Journal of Manufacturing Science and Engineering , 119 : 667 – 674 .
   Web of Science ®Google Scholar
• Outeiro , J.C. ; Dias , A.M. ; Jawahir , I.S. ( 2006 ) On the effects of residual stresses induced by coated and uncoated cutting tools with finite edge radii in turning operations . Annals of the CIRP , 55/1 : 111 – 116 .
   Web of Science ®Google Scholar
• Outeiro , J.C. ; Pina , J.C. ; M'Saoubi , R. ; Pusavec , F. ; Jawahir , I.S. ( 2008 ) Analysis of residual stresses induced by dry turning of difficult-to-machine materials . Annals of the CIRP Manufacturing Technology , 57 : 77 – 80 .
   Web of Science ®Google Scholar
• Oxley , P.L.B. : (1989) The Mechanics of Machining . Ellis Horwood Limited , Chichester , England, UK.
   Google Scholar
• Özel , T. ( 2006 ) The influence of friction models on finite element simulations of machining . Int. J. Mach. Tools & Manuf. , 46 : 518 – 530 .
   Web of Science ®Google Scholar
• Sartkulvanich , P. ; Koppka , F. ; Altan , T. : ( 2004 ) Determination of flow stress for metal cutting simulation – a progress report,” J. Mater. Proc. Tech. , 146 : 61 – 71 .
   Web of Science ®Google Scholar
• Sasahara , H. ; Obikawa , T. ; Shirakashi , T. ( 1997 ) Finite element modeling of residual stress control on machined surface . Trans. NAMRI/SME , XXV : 231 – 218 .
   Google Scholar
• Schwach , D.W. ; Guo , Y.B. ( 2006 ) A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue . Int. J. Fatigue , 28 : 1838 – 1844 .
   Web of Science ®Google Scholar
• Sharman , A.R.C. ; Hughes , J.I. ; Ridgway , K. ( 2006 ) An analysis of the residual stresses generated in Inconel 718™ when turning . Journal of Materials Processing Technology , 173 : 359 – 367 .
   Web of Science ®Google Scholar
• Sharman , A.R.C. ; Hughes , J.I. ; Ridgway , K. ( 2008 ). Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems . Proc. IMechE, Part B: J. Engineering Manufacture , 222 : 653 – 664 .
   Web of Science ®Google Scholar
• Shatla , M. ; Altan , T. : ( 2000 ) Determination of flow stress for machining and practical applications of FEM and analytical modeling . Proc. 2000 NSF Design & Manufacturing Res. Conf. Vancouver, British Columbia, Canada.
   Google Scholar
• Shaw , M.C. ( 2003 ) The size effect in metal cutting . Sadhana-Academy Proceedings in Engineering Sciences , 28 : 875 – 896 .
   Web of Science ®Google Scholar
• Shih , A.J. ( 1995 ) Finite element simulation of orthogonal metal cutting . Transactions of the ASME , 117 : 84 – 93 .
   Web of Science ®Google Scholar
• Shirakashi , T. ; Maekawa , K. ; Usui , E. ( 1983 ) Flow stress of low carbon steel at high temperature and strain rate, Part 1: property of incremental strain method in impact compression test with rapid heating and cooling systems . Bull. Japan Soc. Prec. Eng. , 17 : 161 – 166 .
   Web of Science ®Google Scholar
• Spaans , C. : ( 1971 ) The Fundamentals of Three-Dimensional Chip Curl, Chip Breaking and Chip Control . Ph.D. Dissertation , Delft University of Technology , Delft , South Holland , Netherlands .
   Google Scholar
• Stevenson , M.G. ; Oxley , P.L.B. : ( 1975 ) Torsional hopkinson bar tests to measure stress-strain properties relevant to machining and high speed forming . In: North America Metalwork Res. Conf., 3rd Proc. , Pittsburgh , PA , May 5–7 : 291 – 304 .
   Google Scholar
• Stevenson , R. ( 1997 ) Study on the correlation of workpiece mechanical properties from compression and cutting Tests . J. Mach. Sci. Tech. , 1 ( 1 ): 67 – 79 .
   Web of Science ®Google Scholar
• Stevenson , R. ; Stephenson , D.A. ( 1995 ) The mechanical behavior of zinc during metal cutting . J. Eng. Mat. Tech. , 117 : 172 – 178 .
   Web of Science ®Google Scholar
• Strenkowski , J.S. ; Carroll , J.T. ( 1985 ) A finite element model of orthogonal metal cutting . Trans. ASME, J. Eng. Ind. , 107 : 349 – 354 .
   Google Scholar
• Su , Y. ; He , N. ; Li , L. ; Li , X.L. ( 2006 ) An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4 V . Wear , 261 : 760 – 766 .
   Web of Science ®Google Scholar
• Sun , J. ; Guo , Y.B. ( 2008 ) A new multi-view approach to characterize 3D chip morphology and properties in end milling titanium alloy Ti-6Al-4 V . Int. J. Machine Tools and Manufacture , 48 : 1486 – 1494 .
   Web of Science ®Google Scholar
• Sun , J. ; Guo , Y.B. ( 2009 ) A comprehensive experimental study on surface integrity by end milling Ti-6Al-4 V . Journal of Materials Processing Technology , 209 : 4036 – 4042 .
   Web of Science ®Google Scholar
• Tonshoff , H.K. : ( 1965 ) Eigenspannungen und plastische verformungen im werkstück durch spanende bearbeitung. Dr.-Ing. Diss. TH Hannover.
   Google Scholar
• Tonshoff , H.K. ( 1974 ) Randzonenbeeinflussung durch spanen und abtragen – ein beitrag zur anpassung der analysenmethoden . Annals of the CIRP , 23 ( 1 ): 187 – 188 .
   Google Scholar
• Tonshoff , H.K. ; Arendt , C. ; Amor , R.B. ( 2000 ) Cutting of hardened steel . Annals of the CIRP , 49 ( 2 ): 547 – 566 .
   Google Scholar
• Tonshoff , H.K. ; Wobker , H.-G. ; Brandt , D. ( 1995 ) Hard turning-influences on the workpiece properties . Transactions of NAMRI/SME , 23 : 215 – 220 .
   Google Scholar
• Valiorgue , F. ; Rech , J. ; Hamdi , H. ; Gilles , P. ; Bergheau , J.M. ( 2007 ) A new approach for the modeling of residual stresses induced by turning of 316 L . Journal of Materials Processing Technology , 191 : 270 – 273 .
   Web of Science ®Google Scholar
• van Luttervelt , C.A. ; Childs , T.H.C. ; Jawahir , I.S. ; Klocke , F. ; Venuvinod , P.K. ( 1998 ) Present situation and future trends in modeling of machining operations—progress report of the CIRP working group modeling of machining operations . Annals of the CIRP , 47 ( 2 ): 587 – 626 .
   Google Scholar
• Vollertsen , F. ; Biermann , D. ; Hansen , H.N. ; Jawahir , I.S. ; Kuzman , K. (2009) Size effects in manufacturing of metallic components. Annals of the CIRP , 58(2): 566–587.
   Web of Science ®Google Scholar
• Warren , A.W. ; Guo , Y.B. ( 2006 ) On the clarification of surface hardening by hard turning and grinding . Transactions of NAMRI/SME , 34 : 309 – 316 .
   Google Scholar
• Warren , A.W. ; Guo , Y.B. ( 2007 ) The impact of surface integrity by hard turning vs. grinding on rolling contact fatigue: comparison of fatigue life and acoustic emission signals . Fatigue & Fracture of Eng. Mater. Structures , 30 : 698 – 711 .
   Web of Science ®Google Scholar
• Warren , A.W. ; Guo , Y.B. ( 2009 ) Characteristics of residual stress profiles in hard turned versus ground surfaces with and without a white layer . ASME J. Manufacturing Sci. Eng. , 131/041004 : 1 – 10 .
   Web of Science ®Google Scholar
• Wu , D.W. ; Matsumoto , Y. : ( 1990 ) The effect of hardness on residual stresses in orthogonal machining of AISI 4340 steel . Trans. ASME, J. Eng. Ind. , 112/3 : 245 – 252 .
   Google Scholar
• Yang , X. ; Liu , C.R. ( 2002 ) A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method . International Journal of Mechanical Sciences , 44 : 703 – 723 .
   Web of Science ®Google Scholar
• Yang , X. ; Liu , C.R. ; Grandt , A.F. ( 2002 ) An experimental study on fatigue life variance, residual stress variance, and their correlation of face-turned and ground Ti-6Al-4 V samples . Journal of Manufacturing Science and Engineering , 124 : 809 – 819 .
   Web of Science ®Google Scholar
• Yen , Y.C. ; Jain , A. ; Altan , T. ( 2004 ) A finite element analysis of orthogonal machining using different tool edge geometries . J. Mater. Proc. Tech. , 146 : 72 – 81 .
   Web of Science ®Google Scholar
• Yoshino , M. ; Shirakashi , T. ( 1997 ) Flow-stress equation including effects of strain rate and temperature history . Int. J. Mech. Sci. , 39 ( 12 ): 1345 – 1362 .
   Web of Science ®Google Scholar
• Zemzemi , F. ; Rech , J. ; Ben Salem , W. ; Dogui , A. ; Kapsa , P. ( 2008 ) Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels . Jour. Mat. Proc. Tech. , 209 : 3978 – 3990 .
   Web of Science ®Google Scholar
• Zerilli , F.J. ; Armstrong , R.W. ( 1987 ) Dislocation-mechanics-based constitutive relations for material dynamics calculations . J. App. Phy. , 61 : 1816 – 1825 .
   Web of Science ®Google Scholar
• Zhang , S. ; Guo , Y.B. ( 2009a ) An experimental and analytical analysis on chip morphology, phase transformation, oxidation, and their relationships in finish hard milling . International Journal of Machine Tools & Manufacture , 49 : 805 – 813 .
   Web of Science ®Google Scholar
• Zhang , S. ; Guo , Y.B. : ( 2009b ) Taguchi method based process space for optimal surface topography by finish hard milling . ASME J. Manufacturing Sci. Eng. , 131 : 051003/1–9.
   Web of Science ®Google Scholar
• Zhang , S. ; Li , W. ; Guo , Y.B. : ( 2009 ) Characterization of surface integrity by finish hard milling AISI H13 tool steel . ASME J. Manufacturing Sci. Eng. (in review).
   Google Scholar
• Zlatin , N. ; Field , M. ( 1973 ) Procedures and precautions in machining titanium alloys . Titanium Sci. Tech. , 1 : 489 – 504 .
   Google Scholar
• Zoya , Z.A. ; Krishnamurthy , R. ( 2000 ) The performance of CBN tools in the machining of titanium alloys . J. Mater. Proc. Tech. , 100 : 80 – 86 .
   Web of Science ®Google Scholar