REFERENCES
- Arrazola , P.-J. ( 2003 ) Modélisation numérique de la coupe: Etude de sensibilité des paramètres d'entrée et identification du frottement entre outil-copeau , Phd. Thesis, E.C. Nantes, France .
- Basak , D. ; Yoon , H.W. ; Rhorer , R. ; Burns , T.J. ; Matsumoto , T. (2004) Temperature control of pulse heated specimens in a Kolsky bar apparatus using microsecond time-resolved pyrometry. International Journal of Thermophysics , 25(2): 561–574.
- Burns , T.J. ; Davies , M.A. ; Rhorer , R.L. ; Basak , D. ; Yoon , H.W. ; Fields , R.J. ; Levine , L.E. ; Cao , Q. ; Cooke , A.L. ; Whitenton , E.P. ; Kennedy , M.D. ; Ivester , R. ( 2004 ) Influence of heating rate on flow stress in high-speed machining processes. In Proceedings of the 7th CIRP International Workshop on Modeling of Machining Operations, Cluny, France .
- Childs , T.H.C. ( 1998 ) Material property needs in modeling metal machining . Journal of Machining Science and Technology , 2 ( 2 ): 303 – 316 .
- Davies , M.A. ; Yoon , H. ; Schmitz , T.L. ; Burns , T.J. ; Kennedy , M.D. ( 2003a ) Calibrated thermal microscopy of the tool-chip interface in machining . Journal of Machining Science and Technology , 7 ( 2 ): 166 – 190 .
- Davies , M.A. ; Cao , Q. ; Cooke , A.L. ; Ivester , R. ( 2003b ) On the measurement and prediction of temperature fields in machining AISI 1045 steel . Annals of the CIRP , 52 ( 1 ): 77 – 80 .
- Frantz , C.E. ; Follansbee , P.S. ; Wright , W.T. ( 1984 ) Experimental techniques with the split Hopkinson pressure bar . In High Energy Rate Forming ; Berman , I. ; Schroeder , J.W. (Eds.), ASME : New York , pp. 229 – 236 .
- Gray , G.T. III ( 2000 ) Classic split-Hopkinson pressure bar testing . In Metals Handbook , 10th Edition , American Society of Metals : Materials Park , Ohio , Volume 8 , pp. 462 – 476 .
- Hartley , K.A. ; Duffy , J. ; Hawley , R.E. ( 1985 ) The torsional Kolsky (split-Hopkinson) bar. In Metals Handbook. 9th Edition, American Society of Metals: Materials Park, Ohio, Volume 8, pp. 218–228 .
- Ivester , R. ; Kennedy , M. ; Davies , M. ; Stevenson , R. ; Thiele , J. ; Furness , R. ; Athavale , S. ( 2000 ) Assessment of machining models: Progress report . Journal of Machining Science and Technology , 4 ( 3 ): 511 – 538 .
- Ivester , R. ; Whitenton , E. ; Heigel , J. ; Marusich , T. ; Arthur , C. ( 2007 ) Measuring chip segmentation by high-speed microvideography and comparison to finite-element modeling simulations. In Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Calabria, Italy. .
- Jaspers , S.P.F.C. ; Dautzenburg , J.H. ( 2002a ) Material behavior in metal cutting: Strains, strain rates, and temperatures in metal cutting . Journal of Materials Processing Technology , 121 : 123 – 135 .
- Jaspers , S.P.F.C. ; Dautzenburg , J.H. ( 2002b ) Material behavior in conditions similar to metal cutting: flow stress in the primary shear zone . Journal of Materials Processing Technology , 122 : 322 – 330 .
- Johnson , G.J. ; Cook , W.H. ( 1983 ) A constitutive model and data for metals subjected to large strains, high strain rates, and temperatures. In Proceedings of the 7th Symposium on Ballistics, The Hague, pp. 541–547 .
- Kolsky , H. ( 1949 ) An investigation of the mechanical properties of materials at very high rates of loading . Proceedings of the Physical Society of London , B62 : 676 – 700 .
- Mates , S.P. ; Rhorer , R. ; Whitenton , E. ; Burns , T. ; Basak , D. ( 2008 ) A pulse-heated Kolsky bar technique for measuring flow stress of metals subjected to high loading and heating rates . Experimental Mechanics , 48 : 799 – 807 .
- Meyers , M.A. ( 1994 ) Dynamic Behavior of Materials . John Wiley & Sons : New York , NY .
- Milani , A.S. ; Dabboussi , W.; El-Lahham; C.; Nemes J.A. ; Aberyaratne , R.C. ( 2006 ) On obtaining material parameters for general purpose finite element models. In Proceedings of the 17th IASTED International Conference on Modelling and Simulation, Montreal, QC, Canada.
- Nemat-Nasser , S. ( 2009 ) Plasticity: A Treatise on Finite Deformation of Heterogeneous Inelastic Materials . Cambridge University Press : Cambridge , UK .
- Nicholas , T. ( 1981 ) Tensile testing of materials at high rates of strain . Experimental Mechanics , 21 : 177 – 185 .
- Özel , T. ( 1988 ) Investigation of High Speed Flat End Milling Process. PhD Dissertation, The Ohio State University, Columbus, Ohio .
- Özel , T. ; Karpat , Y. ( 2007 ) Identification of constitutive material model parameters for high strain rate metal cutting conditions using evolutionary computational algorithms . Materials and Manufacturing Processes , 22 : 659 – 667 .
- Özel T. ; Zeren , E. ( 2006 ) A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining . ASME Journal of Manufacturing Science and Engineering , 128 : 119 – 129 .
- Piispanen , V. ( 1948 ) Theory of formation of metal chips . Journal of Applied Physics , 19 : 876 – 881 .
- Rhorer , R.L. ; Davies , M.A. ; Kennedy , M.D. ; Dutterer , B.S. ; Burns , T.J. (2002) Construction and alignment of a Kolsky bar apparatus. In Proceedings of the American Society for Precision Engineering Annual Conference, St. Louis, MO.
- Rose , A. ; Strassburg , W. ( 1956 ) Darstellung der Austenitbildung untereutektoidischer Stähle in Zeit-Temperatur-Auflösungs-Schaubildern . Stahl und Eisen , 76 ( 15 ): 976 – 983 .
- Rosenberg , Z. ; Dawicke , D. ; Strader , E. ; Bless , S.J. ( 1986 ) A new technique for heating specimens in split-Hopkinson bar experiments using induction-coil heaters . Experimental Mechanics , 26 ( 3 ): 275 – 278 .
- Sandvik ( 1996 ) Modern Metal Cutting – A Practical Handbook . Sandvik Coromant , Fair Lawn , NJ .
- Tlusty , J. ( 2000 ) Manufacturing Processes and Equipment , Prentice-Hall , Upper Saddle River , NJ .
- Tounsi , N. ; Vincenti , J. ; Otho , A. ; Elbestawi , M.A. ( 2002 ) From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation . International Journal of Machine Tools and Manufacture , 43 : 1373 – 1383 .
- Trent , E.M. ; Wright , P.K. ( 2000 ) Metal Cutting. , 4th Edition , Butterworth-Heinemann : Boston , MA .
- This article is not subject to US copyright law.