EFFECT OF CRYSTALLOGRAPHIC ORIENTATION ON CUTTING FORCES AND SURFACE FINISH IN DUCTILE CUTTING OF KDP CRYSTALS

REFERENCES

• Lin , Z.Q. ( 1999 ) SG-II laser elementary research and precision SG-II program . Fusion Engineering and Design , 44 : 61 – 66 . (In Chinese)
   Google Scholar
• Dmitriev , V.G. ; Gurzadyan , G.G. ; Nikogosyan , D.N. ( 1999 ) Handbook of Nonlinear Optical Crystals , 1st edition , Springer , New York .
   Google Scholar
• Runkel , M. ; Jennings , R. ; Deyoreo , J. ( 1999 ) An overview of recent KDP damage experiments and implications for NIF Tripler program. Third International Conference on Solid State Lasers for Application to Inertial, Proceeding of SPIE, Monterey, CA, USA; Lowdermilk, W.H., SPIE: Washington .
   Google Scholar
• Pritula , I. ; Kosinova , A. ; Kolybayeva , M. ( 2008 ) Optical, structural and micro-hardness properties of KDP crystals grown from urea-doped solutions . Materials Research Bulletin , 43 : 2778 – 2789 .
   Google Scholar
• Wang , B.L. ; Gao , H. ; Teng , X.J. ( 2010 ) Effect of polishing parameter on material removal and surface quality of KDP crystal . Synthetic Crystals , 39 ( 1 ): 39 – 43 . (In Chinese)
   Google Scholar
• Zhang , Q.Z. ; Gao , H. ; Wang , Q.G. ( 2007 ) Experimental studies on precision grinding of potassium dihydrogen phosphate mono-crystals . Acta Armamentarii , 28 ( 12 ): 1528 – 1532 . (In Chinese)
   Google Scholar
• Menapace , A. ; Ehrmann , P.R. ; Bickel , R.C. ( 2009 ) Magnetorheological finishing (MRF) of potassium dihydrogen phosphate (KDP) crystals: non-aqueous fluids development, optical finish, and laser damage performance at 1064 nm and 532 nm. Laser-Induced Damage in Optical Materials, Proceeding of SPIE, Boulder, CO, USA; Gregory, J.E.; Vitaly, E. G.; Detlev, R.; Soileau, M. J.; Christopher, J.S., SPIE, Washington .
   Google Scholar
• Kozlowski , M.R. ; Thomas , I. ; Edwards , M. ( 1991 ) Influence of diamond turning and surface cleaning processes on the degradation of KDP crystals surfaces. Inorganic Crystals for Optics, Electro-Optics, and Frequency Conversion, Proceedings of SPIE, San Diego, CA, USA; Peter, F.B., SPIE, Washington .
   Google Scholar
• Fuchs , B.A. ; Hed , P.P. ; Baker , P.C. ( 1986 ) Fine diamond turning of KDP crystals . Applied Optics , 25 ( 11 ): 1733 – 1735 .
   PubMedGoogle Scholar
• Namba , Y. ; Kataqirl , M. ; Nakatsuka , M. ( 1998 ) Single point diamond turning of KDP inorganic nonlinear optical crystals for laser fusion . Japan Society of Precision Engineering , 64 : 1487 – 1491 .
   Google Scholar
• Philippe , L. ; Christian , C. ; Pierre , D. ( 1999 ) Using a design of experiment method to improve KDP crystals machining process. Optical Fabrication and Testing, Proceedings of SPIE, Berlin, Germany; Roland, G.; Jonathan, M., SPIE, Washington .
   Google Scholar
• Chen , M.J. ; Wang , J.H. ; Liang , Y.C. ( 2007 ) Research on influence of the cutter rake angle to the surface quality during SPDT machining of crystal KDP . Key Engineering Materials , 339 : 1 – 5 .
   Google Scholar
• Chen , M.J. ; Wang , J.H. ; Chen , X.M. ( 2007 ) Analysis of mechanical property of crystal KDP and simulation of ultra-precision cutting process in the ductile mode . Key Engineering Materials , 329 : 427 – 432 .
   Google Scholar
• Zheng , Z.W. ; Gao , H. ; Li , X.P. ( 2010 ) Influence of the workpiece crystallographic orientation on ultra-precision turning of KDP crystals . Key Engineering Materials , 443 : 687 – 698 .
   Google Scholar