Finite element modeling of micro-milling: Numerical simulation and experimental validation

References

• Abukhshim, N.A.; Mativenga, P.T.; Sheikh, M.A. ( 2006) Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining. International Journal of Machine Tools and Manufacture, 46(7): 782–800.
   Web of Science ®Google Scholar
• Alting, L.; Kimura, F.; Hansen, H.N.; Bissacco, G. ( 2003) Micro engineering. Annals of CIRP, 52(2): 635–657.
   Web of Science ®Google Scholar
• Calamaz, M.; Coupard, F.; Girot, A. ( 2008) New material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 48: 275–288.
   Web of Science ®Google Scholar
• Camara, M.A.; Campos Rubio, J.C.; Abrao, A.M.; Davim, J.P. ( 2012) State of the art on micromilling of materials, a review. Journal of Materials Science and Technology, 28(8): 673–685.
   Web of Science ®Google Scholar
• Chae, J.; Park, S.S.; Freiheit, T. ( 2006) Investigation of micro-cutting operations. International Journal of Machine Tools and Manufacture, 46: 313–332.
   Web of Science ®Google Scholar
• Deform 2D V9.0, 2006. Database.
   Google Scholar
• Dornfeld, D.; Min, S.; Takeuchi, Y. ( 2006) Recent advances in mechanical micromachining. Annals of the CIRP, 55(2): 745–768.
   Web of Science ®Google Scholar
• Fang, N. ( 2005) Tool-chip friction in machining with a large negative rake angle tool. Wear, 258(5): 890–897.
   Web of Science ®Google Scholar
• Filice, L.; Micari, F.; Rizzuti, S.; Umbrello, D. ( 2007) A critical analysis on the friction modelling in orthogonal machining. International Journal of Machine Tools and Manufacture, 47: 709–714.
   Web of Science ®Google Scholar
• Filice, L.; Micari, F.; Rizzuti, S.; Umbrello, D. ( 2008) Dependence of machining simulation effectiveness on material and friction modelling. Machining Science and Technology, 12: 370–389.
   Web of Science ®Google Scholar
• Filice, L.; Umbrello, D.; Beccari, S.; Micari, F. ( 2006) On the FE codes capability for tool temperature calculation in machining processes. Journal of Materials Processing Technology, 174: 286–292.
   Web of Science ®Google Scholar
• Filiz, S.; Conley, C.M.; Wasserman, M.B.; Özdoganlar, O.B. ( 2007) An experimental investigation of micro machinability of copper 101 using tungsten carbide micro endmill. International Journal of Machine Tools and Manufacture, 47:1088–1100.
   Web of Science ®Google Scholar
• Friedrich, C.R.; Vasile, M.J. ( 1996) Development of the micro-milling process for high-aspect-ratio microstructures. Journal of Micro Electromechanical Systems, 5(1): 33–38.
   Web of Science ®Google Scholar
• Hartmetall Co. (2013). Hartmetall carbide datasheet. http://www.hartmetalluk.com/media/1022/emt-612.pdf. Last accessed 2 October 2013.
   Google Scholar
• Heamawatanachai, S.; Bamberg, E. ( 2009) Design and characterization of a PZT driven micromachining tool based on single-point tool tip geometry. Precision Engineering, 33: 387–394.
   Web of Science ®Google Scholar
• Hinds, B.K.; Treanor, G.M. ( 2000) Analysis of stresses in micro-drills using the finite element method. International Journal of Machine Tools and Manufacture, 40: 1443–1456.
   Web of Science ®Google Scholar
• Hou, Z.B.; Komanduri, R. ( 1997) Modeling of thermomechanical shear instability in machining. International Journal of Mechanical Sciences, 39(11): 1273–1314.
   Web of Science ®Google Scholar
• Jin, X.; Altintas, Y. ( 2012) Prediction of micro-milling forces with finite element method. Journal of Materials Processing Technology, 212: 542–552.
   Web of Science ®Google Scholar
• Komanduri, R.; Hou, Z.B. ( 2001) A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology. Tribology International, 34: 653–682.
   Web of Science ®Google Scholar
• Li, C.; Lai, X.; Li, J.N. ( 2006) Modeling of three-dimensional cutting forces in micro-end-milling. Journal of Micromechanics and Microengineering, 17: 671–678.
   Web of Science ®Google Scholar
• Majumdar, P.; Jayaramachandran, R.; Ganesan, S. ( 2005) Finite element analysis of temperature rise in metal cutting processes. Applied Thermal Engineering, 25: 2152–2168.
   Web of Science ®Google Scholar
• M'Saoubi, R.; Chandrasekaran, H. ( 2004) Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel. International Journal of Machine Tools and Manufacture, 44: 213–224.
   Web of Science ®Google Scholar
• Ohbuchi, Y.; Obikawa, T. ( 2003) Finite element modeling of chip formation in the domain of negative rake angle cutting. Journal of Engineering Materials and Technology, 125(3): 324–332.
   Web of Science ®Google Scholar
• Özel, T.; Altan, T. ( 2000) Process simulation using finite element method prediction of cutting forces, tool stresses and temperatures in high speed flat end milling. International Journal of Machine Tools and Manufacture, 40(5): 713–738.
   Web of Science ®Google Scholar
• Özel, T.; Lianos, I.; Soriano, J.; Arrazola, P.J. ( 2011) 3D finite element modelling of chip formation process for machining Inconel 718: comparison of FE software predictions. Machining Science and Technology, 15: 21–46.
   Web of Science ®Google Scholar
• Pawade, R.S.; Joshi, S.S. ( 2011). Mechanism of chip formation in high-speed turning of Inconel 718. Machining Science and Technology: An International Journal, 15(1): 132–152.
   Web of Science ®Google Scholar
• Sartkulvanich, P.; Altan, T.; Göçmen, A. ( 2005) Effects of flow stress and friction models in finite element simulation of orthogonal cutting: A sensitivity analysis. Machine Science and Technology: An International Journal, 9: 1–26.
   Web of Science ®Google Scholar
• Schaller, T.; Bohn, L.; Mayer, J.; Schubert, K. ( 1999) Microstructure grooves with a width of less than 50 micrometer cut with ground hard metal micro end mills. Precision Engineering, 23: 229–235.
   Web of Science ®Google Scholar
• Schmidt, J.; Tritschler, H. ( 2004) Micro cutting of steel. Microsystem Technologies, 10: 167–174.
   Web of Science ®Google Scholar
• Silva, M.B.; Wallbank, J. ( 1999) Cutting temperature: prediction and measurement methods a review. Journal of Materials Processing Technology, 88: 195–202.
   Web of Science ®Google Scholar
• Sima, M.; Özel, T. ( 2010) Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 50: 943–960.
   Web of Science ®Google Scholar
• Spath, D.; Huntrup, V. ( 1999) Micro-milling of steel for mold manufacturing influences of material, tools and process parameters. Precision Engineering Nanotechnology, Proceedings of the First International Euspen Conference, Bremen, Germany, 203–206.
   Google Scholar
• Thepsonthi, T.; Özel, T. ( 2013) Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear. Journal of Materials Processing Technology, 213(4): 532–542.
   Web of Science ®Google Scholar
• Ucun, I.; Aslantas, K. ( 2011) Numerical simulation of orthogonal machining process using multilayer and single-layer coated tools. International Journal of Advanced Manufacturing Technology, 54: 899–910.
   Web of Science ®Google Scholar
• Uhlmann, E.; Graf von der Schulenburg, M.; Zettier, R. ( 2007) Finite element modeling and cutting simulation of Inconel 718. Annals of the CIRP, 56(1): 61–64.
   Web of Science ®Google Scholar
• Umbrello, D. ( 2008) Finite element simulation of conventional and high speed machining of Ti6Al4V alloy. Journal of Materials Processing Technology, 196: 79–87.
   Web of Science ®Google Scholar
• Umbrello, D. ( 2011) Influence of material microstructure changes on surface integrity in hard machining of AISI 52100 steel. International Journal of Advanced Manufacturing Technology, 54: 887–898.
   Web of Science ®Google Scholar
• Umbrello, D.; Filice, L.; Rizzuti, S.; Micari, F.; Settineri, L. ( 2007) On the effectiveness of finite element simulation of orthogonal cutting with particular reference to temperature prediction. Journal of Materials Processing Technology, 189: 284–291.
   Web of Science ®Google Scholar
• Umbrello, D.; Jayal, A.D.; Caruso, S.; Dillon, O.W.; Jawahir, I.S. ( 2010) Modeling of white and dark layer formation in hard machining of AISI 52100 bearing steel. Machining Science and Technology: An International Journal, 14: 128–147.
   Web of Science ®Google Scholar
• Vasile, M.J.; Friedrich, C.R.; Kikkeri, B.; McElhannon, R. ( 1999) Micrometer-scale machining, tool fabrication and initial results. Precision Engineering 19: 180–186.
   Web of Science ®Google Scholar
• Vogler, M.P.; DeVor, R.E.; Kapoor, S.G. ( 2004) On the modeling and analysis of machining performance in micro endmilling part I: surface generation. ASME Journal of Manufacturing Science and Engineering, 126: 685–694.
   Web of Science ®Google Scholar
• Yang, K.; Liang, Y.C.; Zheng, K.N.; Bai, Q.S.; Chen, W.Q. ( 2011) Tool edge radius effect on cutting temperature in micro end milling process. International Journal of Advanced Manufacturing Technololgy, 52: 905–912.
   Web of Science ®Google Scholar
• Yen, Y.C.; Jain, A.; Altan, T. ( 2004) A finite element analysis of orthogonal machining using different tool edge geometries. Journal of Materials Processing Technology, 146: 72–81.
   Web of Science ®Google Scholar
• Zhu, K.; Wong, Y.S.; Hong, G.S. ( 2009) Multi-category micro-milling tool wear monitoring with continuous hidden markov models. Mechanical Systems and Signal Processing, 23: 547–560.
   Web of Science ®Google Scholar