Experimental investigation of top burr formation in high-speed micro-end milling of titanium alloy

References

• Aramcharoen, A.; Mativenga, P.T. (2009) Size effect and tool geometry in micromilling of tool steel. Precision Engineering, 33(4): 402–407.
   Web of Science ®Google Scholar
• Aurich, J.C.; Dornfeld, D.; Arrazola, P.J.; Franke, V.; Leitz, V.L.; Min, S. (2009) Burrs–analysis, control and removal. CIRP Annals-Manufacturing Technology, 58: 519–542.
   Web of Science ®Google Scholar
• Bajpai, V.; Kushwaha, A.K.; Singh, R.K. (2013) Burr formation and surface quality in high speed micro milling of titanium alloy (Ti6Al4V), ASME. International Manufacturing Science & Engineering, 2: 1216–1224.
   Google Scholar
• Bandapalli, C.; Sutaria, B.M.; Bhatt, D.V. (2013) High speed machining of Ti-Alloys – A critical review. Proc. Int. 16th Nat. Conf. Mach. Mech. (iNaCoMM2013), IIT Roorkee, India, Dec 18–20.
   Google Scholar
• Bandapalli, C.; Singh, K.K.; Sutaria, B.M.; Bhatt, D.V. (2016) Experimental investigation of machinability parameters in high-speed micro-end milling of titanium (grade-2). International Journal of Advanced Manufacturing Technology, 85: 2139–2153.
   Web of Science ®Google Scholar
• Biermann, D.; Heilmann, M. (2009) Burr minimization strategies in machining operations, burrs–analysis, control and removal. Proc. CIRP Int. Conf. Burrs, Berlin, Heidelberg, 13–20.
   Google Scholar
• Dornfeld, D.; Min, S. (2009) A review of burr formation in machining, burrs –analysis, control and removal. Proc. CIRP Int. Conf. Burrs, Berlin, Heidelberg, 3–11.
   Google Scholar
• Dornfeld, D.; Min, S.; Takeuchi, Y. (1996) Recent advances in mechanical micromachining. Annals of the CIRP, 55: 2.
   Google Scholar
• Hassanpoura, H.; Mohammad, H.; Rezaeia, H.; Rastia, A. (2016) Experimental study of cutting force, microhardness, surface roughness, and burr size on micromilling of Ti6Al4V in minimum quantity lubrication. Journal of materials and Manufacturing Processes, 31(13): 1654–1662.
   Web of Science ®Google Scholar
• Hashimura, M.; Ueda, K.; Dornfeld, D. (1995) Analysis of three-dimensional burr formation in oblique Cutting. Annals of the CIRP, 44: 1.
   Google Scholar
• Hassamontr, J.; Dornfeld, D.A. (1996) Review of burr minimization approaches. http://www.thaiscience.info/Article%20for%20ThaiScience/Article/61/10009261.pdf.
   Google Scholar
• Jaffery, S.I.; Driver, N.; Mativenga, P.T. (2010) Analysis of process parameters in the micromachining of Ti-6Al-4V alloy. Proc. 36th Int. MATADOR Conf., University of Manchester, United Kingdom, 239–242.
   Google Scholar
• Kazuo, N.; Minoru, A. (1987) Burr formation in metal cutting. Annals of the CIRP, 36: 1.
   Google Scholar
• Kienzler, A.; Deuchert, M.; Schulze, V. (2009) Burr minimization and removal by micro milling strategies or micro peening processes, burrs–analysis, control and removal. Proc. CIRP Int. Conf. Burrs, University of Kaiserslautern, Germany, 237–243.
   Google Scholar
• Klocke, F.; Lung, D.; Essig, C. (2009) Chip breakage prediction by a web-based expert system, burrs–analysis, control and removal. Proc. CIRP Int. Conf. Burrs, University of Kaiserslautern, Germany, 107–113.
   Google Scholar
• Kumar, S.; Dornfeld, D. (2003) Basic approach to a prediction system for burr formation in face milling. Journal of Manufacturing Processes, 5: 2.
   Google Scholar
• Laia, X.; Li, H.; Li, C.; Lin, Z.; Ni, J. (2008) Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness. International Journal of Machine Tools & Manufacture, 48: 1–14.
   Web of Science ®Google Scholar
• Lekkala, R.; Bajpai, V.; Singh, R.K.; Joshi, S.S. (2011) Characterization and modelling of burr formation in micro-end milling. Journal of Precision Engineering, 35: 625–637.
   Web of Science ®Google Scholar
• Leopold, J.; Wohlgemuth, R. (2009) Modelling and simulation of burr formation: State-of-the-art and future trends, burrs–analysis, control and removal. Proc. CIRP Int. Conf. Burrs, University of Kaiserslautern, Germany, 79–86.
   Google Scholar
• Nakayama, K.; Arai, M. (1987) Burr formation in metal cutting. Annals of the CIRP, 36(1): 33–36.
   Google Scholar
• Rahman, M.; Wang, Z.-G.; Wong, Y.-S. (2006) A review on high-speed machining of titanium alloys. JSME International Journal Series C, 49(1): 11–20.
   Google Scholar
• Sangkee, M.; Dornfeld, D.A.; Jinsoo, K.; Borlin, S. (2001) Finite element modeling of burr formation in metal cutting. International Journal of Machining Science and Technology, 5(3): 307–322.
   Web of Science ®Google Scholar
• Saptaji, K.; Subbiah, S.; Dhupia, J.S. (2012) Effect of side edge angle and effective rake angle on top burrs in micro-milling. Journal of Precision Engineering, 36: 444–450.
   Web of Science ®Google Scholar
• Schueler, G.M.; Engmann, J.; Marx, T.; Haberland, R.; Aurich, J.C. (2009) Burr formation & surface characteristics in micro-end milling of titanium alloys. Proc. CIRP Int. Conf. Burrs–Analysis, Control and Removal, Springer, Berlin, Heidelberg, 129–138.
   Google Scholar
• Yang, X.; Liu, C. (1999) A review on machining titanium and its alloys. International Journal of Machining Science and Technology, 3(1): 107–139.
   Web of Science ®Google Scholar