Effect of thermal properties on laser cutting of continuous glass and carbon fiber-reinforced polyamide 6 composites

References

• Bansal, N.P.; Doremus, R.H. (1986) Handbook of Glass Properties. Academic Press, Orlando, USA.
   Google Scholar
• Bluemel, S.; Jaeschke, P.; Wippo, V.; Bastick, S.; Stute, U.; Kracht, D.; Haferkamp, H. (2012) Laser Machining of CFRP using a high power laser – Investigation on the heat affected zone. Proc. 15th Eur. Confon Composite Materials, Venice, Italy.
   Google Scholar
• Bluemel, S.; Staehr, R.; Jaeschke, P.; Stute, U. (2013) Determination of corresponding temperature distribution within CFRP during laser cutting. Physics Procedia, 41: 408–414.
   Google Scholar
• Bluemel, S.; Jaeschke, P.; Suttmann, O.; Overmeyer, L. (2014) Comparative study of achievable quality cutting carbon fibre reinforced thermoplastics using continuous wave and pulsed laser sources. Physics Procedia, 56: 1143–1152.
   Google Scholar
• Botelho, E.C.; Figiel, L.; Rezende, M.C.; Lauke, B. (2003) Mechanical behavior of carbon fiber reinforced polyamide composites. Composite Science and Technology, 63: 1843–1855.
   Web of Science ®Google Scholar
• Burkhart, A.; Cramer, D. (2006) Continuous-fibre reinforced thermoplastic tailored blanks. JEC Composites Magazine, 22: 41–43.
   Google Scholar
• Caiazzo, F.; Curcio, F.; Daurelio, G.; Memola Capece Minutolo, F. (2005) Laser cutting of different polymeric plastics (PE, PP and PC) by a CO2 laser beam. Materials Processing Technology, 159: 279–285.
   Web of Science ®Google Scholar
• Cenna, A.A.; Mathew, P. (1997) Evaluation of cut quality of fibre-reinforced plastics – A review. International Journal of Machine Tools & Manufacture, 37: 723–736.
   Web of Science ®Google Scholar
• Cenna, A.A.; Mathew, P. (2002) Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials. International Journal of Machine Tools & Manufacture, 42: 105–113.
   Web of Science ®Google Scholar
• Chen, J.H.; Schulz, E.; Bohse, J.; Hinrichsen, G. (1999) Effect of fibre content on the interlaminar fracture toughness of unidirectional glass-fibre/polyamide composite. Composites: Part A, 30: 747–755.
   Web of Science ®Google Scholar
• Chou, T.-W. (1992) Microstructural Design Of Fiber Composites. Cambridge University Press, Cambridge, UK.
   Google Scholar
• Choudhury, I.A.; Shirley, S. (2010) Laser cutting of polymeric materials: An experimental investigation. Optics & Laser Technology, 42: 503–508.
   Web of Science ®Google Scholar
• Chung, D.D.L. (1994) Carbon Fiber Composites. Newton, USA: Butterworth-Heinemann.
   Google Scholar
• El-Dessouky, H.M.; Lawrence, C.A. (2013) Ultra-lightweight carbon fibre/thermoplastic composite material using spread tow technology. Composites: Part B, 50: 91–97.
   Web of Science ®Google Scholar
• Gibson, R.F. (2012) Principles of Composite Material Mechanics. Taylor & Francis, Boca Raton, USA.
   Google Scholar
• Haanappel, S. (2013) Forming of UD fibre reinforced thermoplastics: A critical evaluation of intra-ply shear. PhD thesis, University of Twente, Enschede, The Netherlands.
   Google Scholar
• Herzog, D.; Jaeschke, P.; Meier, O.; Haferkamp, H. (2008) Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP. International Journal of Machine Tools & Manufacture, 48: 1464–1473.
   Web of Science ®Google Scholar
• Jaeschke, P.; Kern, M.; Stute, U.; Haferkamp, H.; Peters, C.; Herrmann, A. S. (2011) Investigations on interlaminar shear strength properties of disc laser machined consolidated CF-PPS laminates. Express Polymer Letters, 5(3): 238–245.
   Web of Science ®Google Scholar
• Jaeschke, P.; Kern, M.; Stute, U.; Kracht, D.; Haferkamp, H. (2014) Laser processing of continuous carbon fibre reinforced polyphenylene sulfide organic sheets – Correlation of process parameters and reduction in static tensile strength properties. Thermoplastic Composite Materials, 27(3): 324–337.
   Web of Science ®Google Scholar
• Komanduri, R. (1997) Machining of fiber reinforced composites. Machining Science and Technology, 1(1): 113–152.
   Web of Science ®Google Scholar
• Leone, C.; Papa, I.; Tagliaferri, F.; Lopresto, V. (2013) Investigation of CFRP laser milling using a 30W Q-switched Yb:YAG fiber laser: Effect of process parameters on removal mechanisms and HAZ formation. Composites: Part A, 55: 129–142.
   Web of Science ®Google Scholar
• Ma, Y.; Ueda, M.; Yokozeki, T.; Sugahara, T.; Yang, Y.; Hamada, H. (2017) A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 composites. Composite Structures, 160: 89–99.
   Web of Science ®Google Scholar
• Mallick, P.K. (2007) Fiber-Reinforced Composites. Taylor & Francis, Boca Raton, USA.
   Google Scholar
• Meyer, L.O.; Schulte, K.; Grove-Nielsen, E. (2009) CFRP-Recycling following a pyrolysis route: Process optimization and potentials. Composite Materials, 43(9): 1121–1132.
   Google Scholar
• Ohkubo, T.; Tsukamoto, M.; Sato, Y. (2014) Numerical simulation of laser beam cutting of carbon fiber reinforced plastics. Physics Procedia, 56: 1165–1170.
   Google Scholar
• Pan, C.T.; Hocheng, H. (1996) The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite material. Materials Processing Technology, 62: 54–60.
   Web of Science ®Google Scholar
• Pan, C.T.; Hocheng, H. (2001) Evaluation of anisotropic thermal conductivity for unidirectional FRP in laser machining. Composites: Part A, 32: 1657–1667.
   Web of Science ®Google Scholar
• Rosato, D.V.; Rosato, D.V. (2004) Reinforced Plastics Handbook. Elsevier, New York, USA.
   Google Scholar
• Sarkar, B.K. (1998) Estimation of composite strength by a modified rule of mixtures incorporating defects. Bulletin of Materials Science, 21: 329–333.
   Web of Science ®Google Scholar
• Shanmugam, D.K.; Chen, F.L.; Siores, E.; Brandt, M. (2002) Comparative study of jetting machining technologies over laser machining technology for cutting composite materials. Composite Structures, 57: 289–296.
   Web of Science ®Google Scholar
• Shanmugam, D.K.; Nguyen, T.; Wang, J. (2008) A study of delamination on graphite/epoxy composites in abrasive waterjet machining. Composites: Part A, 39: 923–929.
   Web of Science ®Google Scholar
• Sharma, A.; Yadava, V. (2018) Experimental analysis of Nd-YAG laser cutting of sheet materials – A review. Optics and Laser Technology, 98: 264–280.
   Web of Science ®Google Scholar
• Sheng, P.; Chryssolouris, G. (1995) Theoretical model of laser grooving for composite materials. Journal of Composite Materials, 29(1): 96–112.
   Web of Science ®Google Scholar
• Sherman, L.M. (2012) The new lightweights: Injection molded hybrid composites spur automotive innovation. Plastics Technology, 58(11): 27–31.
   Google Scholar
• Stewart, R. (2011) Thermoplastic composites – Recyclable and fast to process. Reinforced Plastics, 55: 22–28.
   Google Scholar
• Staehr, R.; Bluemel, S.; Hansen, P.; Jaeschke, P.; Suttmann, O.; Overmeyer, L. (2015) The influence of moisture content on the heat affected zone and resulting in-plane shear strength of laser cut thermoplastic CFRP. Plastics, Rubber and Composites, 44(3): 111–116.
   Web of Science ®Google Scholar
• Staehr, R.; Lindner, J.; Bluemel, S.; Meier, O.; Jaeschke, P.; Suttmann, O.; Overmeyer, L. (2016) The impact of cooling strategies and fixture options on the thermal load during laser processing of carbon fibre reinforced thermoplastics. Proc. 17th Eur. Conf. on Composite Materials ECCM 17, Munich, Germany.
   Google Scholar