Mechanistic modeling of cutting forces in micro-end-milling considering tool run out, minimum chip thickness and tooth overlapping effects

References

• Afazov, S.M.; Zdebski, D.; Ratchev, S.M.; Segal, J.; Liu, S. (2013) Effects of micro-milling conditions on the cutting forces and process stability. Journal of Materials Processing Technology, 213: 671–684.
   Web of Science ®Google Scholar
• Alting, L.; Kimura, F.; Hansen, H.N.; Bissacco, G. (2003) Micro engineering. CIRP Annals-Manufacturing Technology, 52: 635–657.
   Web of Science ®Google Scholar
• Anand, R. S.; Patra, K. (2014) Modeling and simulation of mechanical micro-machining—A review. Machining Science and Technology, 18: 323–347.
   Web of Science ®Google Scholar
• Aslantas, K.; Hopa, H.E.; Percin, M.; Ucun, I.; Çicek, A. (2016) Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti6Al4V alloy. Precision Engineering, 45: 55–66.
   Web of Science ®Google Scholar
• Attanasio, A. (2017). Tool run-out measurement in micro milling. Micromachines, 8(7): 221.
   Web of Science ®Google Scholar
• Bao, W.Y.; Tansel, I.N. (2000a) Modeling micro-end-milling operations. Part I: analytical cutting force model. International Journal of Machine Tools and Manufacture, 40: 2155–2173.
   Web of Science ®Google Scholar
• Bao, W.Y.; Tansel, I.N. (2000b) Modeling micro-end-milling operations. Part II: tool run-out. International Journal of Machine Tools and Manufacture, 40: 2175–2192.
   Web of Science ®Google Scholar
• Bao, W.Y.; Tansel, I.N. (2000c) Modeling micro-end-milling operations. Part III: influence of tool wear. International Journal of Machine Tools and Manufacture, 40: 2193–2211.
   Web of Science ®Google Scholar
• Chae, J.; Park, S.S; Freiheit, T. (2006) Investigation of micro-cutting operations. International Journal of Machine Tools and Manufacture, 46: 313–332.
   Web of Science ®Google Scholar
• Dai, J.; Ding, W.; Zhang, L.; Xu, J.; Su, H. (2015) Understanding the effects of grinding speed and undeformed chip thickness on the chip formation in high-speed grinding. The International Journal of Advanced Manufacturing Technology, 81(5–8): 995–1005.
   Web of Science ®Google Scholar
• Ding, W.; Zhu, Y.; Zhang, L.; Xu, J.; Fu, Y.; Liu, W.; Yang, C. (2015) Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels. Wear, 332: 800–809.
   Web of Science ®Google Scholar
• Fu, D.; Ding, W.; Yang, S.; Miao, Q.; Fu, Y. (2017) Formation mechanism and geometry characteristics of exit-direction burrs generated in surface grinding of Ti-6Al-4V titanium alloy. The International Journal of Advanced Manufacturing Technology, 89(5–8): 2299–2313.
   Web of Science ®Google Scholar
• Huang, X.; Ding, W.; Zhu, Y.; Yang, C. (2017) Crack propagation simulation of polycrystalline cubic boron nitride abrasive materials based on cohesive element method. Computational Materials Science, 138: 302–314.
   Web of Science ®Google Scholar
• Jing, X.; Li, H.; Wang, J.; Tian, Y. (2014) Modelling the cutting forces in micro end milling using a hybrid approach. International Journal of Advanced Manufacturing Technology, 73: 1647–1656.
   Web of Science ®Google Scholar
• Jing, X.; Tian, Y.; Yuan, Y.; Wang, F. (2017) A runout measuring method using modeling and simulation cutting force in micro end-milling. The International Journal of Advanced Manufacturing Technology, 91(9–12): 4192–4201.
   Web of Science ®Google Scholar
• Jun, M.B.; Goo, C.; Malekian, M.; Park, S. (2012) A new mechanistic approach for micro end milling force modeling. Journal of Manufacturing Science and Engineering, 134: 011006.
   Web of Science ®Google Scholar
• Kanlı, M. (2014) Modeling of cutting forces in micro milling including run-out. Doctoral dissertation, Bilkent University: Turkey.
   Google Scholar
• Kline, W.A.; DeVor, R.E. (1983) The effect of runout on cutting geometry and forces in end milling. International Journal of Machine Tool Design and Research, 23(2–3), 123–140.
   Web of Science ®Google Scholar
• Li, H.; Wu, B. (2016) Development of hybrid cutting force model for micro milling of brass. International Journal of mechanical sciences, 115–116: 586–595.
   Web of Science ®Google Scholar
• Lu, X.; Jia, Z.; Wang, X.; Li, G.; Ren, Z. (2015) Three-dimensional dynamic cutting forces prediction model during micro-milling nickel-based super alloy. International Journal of Advanced Manufacturing Technology, 81: 2067–2086.
   Web of Science ®Google Scholar
• Lucca, D.A.; Seo, Y.W.; Komanduri, R. (1993) Effect of tool edge geometry on energy dissipation in ultraprecision machining. CIRP Annals-Manufacturing Technology, 42: 83–86.
   Google Scholar
• Melkote, S.N.; Endres, W.J. (1998) The importance of including size effect when modeling slot milling. International Journal of Manufacturing Science and Engineering, 120: 68–75.
   Web of Science ®Google Scholar
• Moges, T.M.; Desai, K.A.; Rao, P.V.M. (2017) On modeling of cutting forces in micro-end milling operation. Machining Science and Technology, 21(4): 562–581.
   Web of Science ®Google Scholar
• Oliveira, F.B.D.; Rodrigues, A.R.; Coelho, R.T.; de Souza, A.F. (2015) Size effect and minimum chip thickness in micromilling. International Journal of Machine Tools and Manufacture, 89: 39–54.
   Web of Science ®Google Scholar
• Park, S.S.; Malekian, M. (2009) Mechanistic modeling and accurate measurement of micro end milling forces. CIRP Annals-Manufacturing Technology, 58: 49–52.
   Web of Science ®Google Scholar
• Pratap, T.; Patra, K. (2017) Finite element method based modeling for prediction of cutting forces in micro-end milling. Journal of the Institution of Engineers (India): Series C, 98: 17–26.
   Google Scholar
• Pratap, T; Patra, K. (2016) Fabrication and surface characterization of tool based micro-dimple texture on Ti-6Al-4V for biomedical implants. In Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Pune, India.
   Google Scholar
• Qiu, Y.; Gu, M.L.; Zhang, F.G.; Wei, Z. (2014) Influence of tool inclination on micro-ball-end milling of quartz glass. Materials and Manufacturing Processes, 29:1436–1440.
   Web of Science ®Google Scholar
• Rao, S.; Shunmugam, M.S. (2012) Analytical modeling of micro end-milling forces with edge radius and material strengthening effects. Machining Science and Technology, 16: 205–227.
   Web of Science ®Google Scholar
• Rodríguez, P.; Labarga, J.E. (2013) A new model for the prediction of cutting forces in micro-end-milling operations. Journal of Materials Processing Technology, 213: 261–268.
   Web of Science ®Google Scholar
• Sahoo, P.; Pratap, T.; Patra, K.; Dyakonov, A. A. (2017) Size effects in micro end-milling of hardened P-20 steel. In International Conference on Advances in Materials and Manufacturing Applications (ICONAMMA-2017), Bengaluru, India.
   Google Scholar
• Srinivasa, Y.V.; Shunmugam, M.S. (2013) Mechanistic model for prediction of cutting forces in micro end-milling and experimental comparison. International Journal of Machine Tools and Manufacture, 67: 18–27.
   Web of Science ®Google Scholar
• Zhang, X.; Ehmann, K.F.; Yu, T.; Wang, W. (2016) Cutting forces in micro-end-milling processes. International Journal of Machine Tools and Manufacture, 107:21–40.
   Web of Science ®Google Scholar
• Zhang, X.; Yu, T.; Wang, W. (2018) Prediction of cutting forces and instantaneous tool deflection in micro end milling by considering tool run-out. International Journal of Mechanical Sciences, 136: 124–133.
   Web of Science ®Google Scholar
• Zhou, L.; Peng, F.Y.; Yan, R.; Yao, P.F.; Yang, C.C.; Li, B. (2015) Analytical modeling and experimental validation of micro end-milling cutting forces considering edge radius and material strengthening effects. International Journal of Machine Tools and Manufacture, 97: 29–41.
   Web of Science ®Google Scholar
• Zhu, Y.; Ding, W.; Yu, T.; Xu, J.; Fu, Y.; Su, H. (2017) Investigation on stress distribution and wear behaviour of brazed polycrystalline cubic boron nitride super abrasive grains: numerical simulation and experimental study. Wear, 376: 1234–1244.
   Web of Science ®Google Scholar