References
- Astashev, V.K.; Babitsky, V.I. (1998) Ultrasonic cutting as a nonlinear (vibro-impact) process. Ultrasonics 36(1-5): 89–96. doi:https://doi.org/10.1016/S0041-624X(97)00101-7
- Astashev, V.K.; Babitsky, V.I. (2007) Ultrasonic Processes and Machines: Dynamics, Control and Applications, Ultrasonic Processes and Machines. Springer, Berlin.
- Azarhoushang, B.; Akbari, J. (2007) Ultrasonic-assisted drilling of Inconel 738-LC. International Journal of Machine Tools and Manufacture 47(7-8): 1027–1033. doi:https://doi.org/10.1016/j.ijmachtools.2006.10.007
- Boresi, A.P.; Schmidt, R.J.; Sidebottom, O.M. (1993) Advanced Mechanics of Materials. Wiley, New York.
- Cao, F.G. (2014) Ultrasonic Machining. Chemical Industry Press, Beijing, China.
- Cong, W.L.; Pei, Z.J.; Mohanty, N.; Van Vleet, E.; Treadwell, C. (2011) Vibration amplitude in rotary ultrasonic machining: A novel measurement method and effects of process variables. Journal of Manufacturing Science and Engineering 133(3): 034501. doi:https://doi.org/10.1115/1.4004133
- Cong, W.L.; Pei, Z.J.; Sun, X.; Zhang, C.L. (2014) Rotary ultrasonic machining of CFRP: A mechanistic predictive model for cutting force. Ultrasonics 54(2): 663–675. doi:https://doi.org/10.1016/j.ultras.2013.09.005
- Debnath, K.; Singh, I.; Dvivedi, A. (2015) Rotary mode ultrasonic drilling of glass fiber-reinforced epoxy laminates. Journal of Composite Materials 49(8): 949–963. doi:https://doi.org/10.1177/0021998314527857
- Feng, D.J.; Zhao, F.L.; Guo, D.M. (2004) Influence of ultrasonic tools on resonance performance of composite horn. Journal of Dalian University of Technology 44: 685–688.
- Feng, P.F.; Wang, J.J.; Zhang, J.F. (2017) Research status and future prospects of rotary ultrasonic machining of hard and brittle materials. Journal of Mechanical Engineering 53(19): 3–21. doi:https://doi.org/10.3901/JME.2017.19.003
- Fernando, P.K.S.C.; Zhang, M.; Pei, Z.J. (2019) Rotary ultrasonic machining: Effects of tool natural frequency on ultrasonic vibration amplitude. Machining Science and Technology 23(4): 595–611. doi:https://doi.org/10.1080/10910344.2019.1575404
- Gao, G.F.; Xia, Z.W.; Yuan, Z.J.; Xiang, D.H.; Zhao, B. (2021) Influence of longitudinal-torsional ultrasonic-assisted vibration on micro-hole drilling Ti-6Al-4V. Chinese Journal of Aeronautics 34(9): 247–260. doi:https://doi.org/10.1016/j.cja.2020.06.012
- Kumabe, J. (1985) Fundamentals and Applications of Precision Machining Vibration Cutting. China Machine Press, Beijing, China.
- Kumar, M.N.; Subbu, S.K.; Krishna, P.V.; Venugopal, A. (2014) Vibration assisted conventional and advanced machining: A review. Procedia Engineering 97: 1577–1586. doi:https://doi.org/10.1016/j.proeng.2014.12.441
- Liu, D.F.; Cong, W.L.; Pei, Z.J.; Tang, Y.J. (2012) A cutting force model for rotary ultrasonic machining of brittle materials. International Journal of Machine Tools and Manufacture 52(1): 77–84. doi:https://doi.org/10.1016/j.ijmachtools.2011.09.006
- Liu, Z.; Jin, Y.H.; Zhao, B. (2012) Study on influence of loading on acoustic system characteristics of ultrasonic machining. Aviation Precision Manufacturing Technology 1: 10–13.
- Pujana, J.; Rivero, A.; Celaya, A.; Lacalle, L.N.L.D. (2009) Analysis of ultrasonic-assisted drilling of Ti-6Al-4V. International Journal of Machine Tools and Manufacture 49(6): 500–508. doi:https://doi.org/10.1016/j.ijmachtools.2008.12.014
- Thoe, T.B.; Aspinwall, D.K.; Wise, M.L.H. (1998) Review on ultrasonic machining. International Journal of Machine Tools and Manufacture 38(4): 239–255. doi:https://doi.org/10.1016/S0890-6955(97)00036-9
- Wang, J. (2017) Damage formation mechanism and suppression methods in rotary ultrasonic drilling of hard and brittle materials & ceramic matrix composites. PhD thesis. Tsinghua University, Beijing.
- Wang, J.; Feng, P.; Zhang, J. (2016) Investigations on the edge-chipping reduction in rotary ultrasonic machining using a conical drill. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230(7): 1254–1263. doi:https://doi.org/10.1177/0954405416654426
- Wang, J.; Feng, P.; Zhang, J.; Cai, W.; Shen, H. (2017) Investigations on the critical feed rate guaranteeing the effectiveness of rotary ultrasonic machining. Ultrasonics 74: 81–88. doi:https://doi.org/10.1016/j.ultras.2016.10.003
- Wang, J.; Feng, P.; Zhang, J.; Shen, H. (2017) Experimental investigation on the effects of thermomechanical loading on the vibrational stability during rotary ultrasonic machining. Machining Science and Technology 21(2): 239–256. doi:https://doi.org/10.1080/10910344.2017.1283962
- Wang, J.; Zhang, J.; Feng, P. (2017) Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites. Composites Part B: Engineering 129: 233–242. doi:https://doi.org/10.1016/j.compositesb.2017.07.081
- Wang, J.; Zhang, J.; Feng, P.; Guo, P. (2018a) Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: A critical review. Ceramics International 44(2): 1227–1239. doi:https://doi.org/10.1016/j.ceramint.2017.10.050
- Wang, J.; Zhang, J.; Feng, P.; Guo, P. (2018b) Experimental and theoretical investigation on critical cutting force in rotary ultrasonic drilling of brittle materials and composites. International Journal of Mechanical Sciences 135: 555–564. doi:https://doi.org/10.1016/j.ijmecsci.2017.11.042
- Wegener, K.; Bleicher, F.; Krajnik, P.; Hoffmeister, H.-W.; Brecher, C. (2017) Recent developments in grinding machines. CIRP Annals 66(2): 779–802. doi:https://doi.org/10.1016/j.cirp.2017.05.006
- Zhang, C.L.; Feng, P.F.; Wu, Z.J. (2013) Research on the properties of ultrasonic vibration amplitude and actual cutting depth in rotary ultrasonic machining. Acta Armamentarii 34(7): 883–888.
- Zhang, Y.D.; Yu, J.Y.; Wang, C. (1994) Influence of honing loading on resonance frequency of honing vibration. Acta Acustica 5: 367–371.
- Zhao, B.; Bie, W.B.; Wang, X.B.; Chen, F.; Chang, B.Q. (2019) Design and experimental investigation on longitudinal-torsional composite horn considering the incident angle of ultrasonic wave. The International Journal of Advanced Manufacturing Technology 105(1-4): 325–341. doi:https://doi.org/10.1007/s00170-019-04220-0
- Zhao, B.; Bie, W.B.; Wang, X.B.; Chen, F.; Wang, Y.; Chang, B.Q. (2019) The effects of thermo-mechanical load on the vibrational characteristics of ultrasonic vibration system. Ultrasonics 98: 7–14. doi:https://doi.org/10.1016/j.ultras.2019.05.005
- Zhao, B.; Chang, B.Q.; Yuan, L.S.; Li, P.T. (2020) Influence of force loading on the stability of ultrasonic longitudinal-torsional composite drilling system. The International Journal of Advanced Manufacturing Technology 106(3-4): 891–905. doi:https://doi.org/10.1007/s00170-019-04654-6