References
- ABAQUS. (2011), Abaqus Theory Manual, v.6.11. USA: Hibbitt, Karlsson and Sorensen, I. (n.d.). ABAQUS.
- Al-Maghribi, A. (2008). Comportement des matériaux composites a fibres courtes : applications a l’impact basse vitesse. Université Paul Sabatier, Toulouse.
- Arola, D.; Sultan, M.B.; Ramulu, M. 2002, Finite element modeling of edge trimming fiber reinforced patics. Journal of Manufacturing Science and Engineering124(1): 32–41. doi:https://doi.org/10.1115/1.1428329
- Caprino, G.; Santo, L. 1998, Interpretation of size effect in orthogonal machining of composite materials. Part II. Composites Part A: Applied Science and Manufacturing 29(8): 893–897. doi:https://doi.org/10.1016/S1359-835X(98)00029-3
- Chaturvedi, S. K.; Sun, C. T.; Sierakowski, R. L. 1983, Mechanical characterization of sheet molding compound composites. Polymer Composites 4(3): 167–171. doi:https://doi.org/10.1002/pc.750040306
- Devotta, A.M. (2015) Characterization & Modeling of Chip Flow Angle & Morphology in 2D & 3D Turning Process. Sweden: University West Sweden.
- Duan, C.; Kong, W.; Hao, Q.; Zhou, F. 2013, Modeling of white layer thickness in high speed machining of hardened steel based on phase transformation mechanism. The International Journal of Advanced Manufacturing Technology69(1-4): 59–70. doi:https://doi.org/10.1007/s00170-013-5005-y
- El-Tayeb, N.S.M.; Yousif, B.F.; Yap, T.C. 2006, Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear 261(3-4): 443–452. doi:https://doi.org/10.1016/j.wear.2005.12.014
- Fang, N.; Jawahir, I.S. 2002, Analytical predictions and experimental validation of cutting force ratio, chip thickness, and chip back-flow angle in restricted contact machining using the universal slip-line model. International Journal of Machine Tools and Manufacture 42(6): 681–694. doi:https://doi.org/10.1016/S0890-6955(02)00006-8
- Izamshah, R.; Akmal, M.; Ali, M.A.; Hadzley, M.; Kasim, M.S.; Azam, M.A.; Sulaiman, M.A. 2014, Finite element model of trimming CFRP aerospace composites. Applied Mechanics and Materials 695: 163–166.www.scientific.net/AMM.695.163 doi:10.4028/
- Jia, Z.; Su, Y.; Niu, B.; Boyu, Z.; Wang, F. 2016, The interaction between the cutting force and induced sub-surface damage in machining of carbon fiber-reinforced plastics. Journal of Reinforced Plastics and Composites 35(9): 712–726. doi:https://doi.org/10.1177/0731684415626284
- Johnson, G.R.; Cook, W.H. 1985, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering Fracture Mechanics 21(1): 31–48. doi:https://doi.org/10.1016/0013-7944(85)90052-9
- Kiyak, M.; Altan, M.; Altan, E. 2007, Prediction of chip flow angle in orthogonal turning of mild steel by neural network approach. The International Journal of Advanced Manufacturing Technology 33(3-4): 251–259. doi:https://doi.org/10.1007/s00170-006-0460-3
- Koplev, A.; Lystrup, A.; Vorm, T. 1983, The cutting process, chips, and cutting forces in machining CFRP. Composites 14(4): 371–376. doi:https://doi.org/10.1016/0010-4361(83)90157-X
- Lee, H.K.; Simunović, S.; Shin, D.K. 2004, A computational approach for prediction of the damage evolution and crushing behavior of chopped random fiber composites. Computational Materials Science 29(4): 459–474. doi:https://doi.org/10.1016/j.commatsci.2003.12.008
- Li, H.; Qin, X.; He, G.; Jin, Y.; Sun, D.; Price, M. 2016, Investigation of chip formation and fracture toughness in orthogonal cutting of UD-CFRP. The International Journal of Advanced Manufacturing Technology 82(5-8): 1079–1088. doi:https://doi.org/10.1007/s00170-015-7471-x
- Lopresto, V.; Langella, A.; Caprino, G.; Durante, M.; Santo, L. 2017, Conventional orthogonal cutting machining on unidirectional fibre reinforced plastics. Procedia CIRP 62: 9–14. doi:https://doi.org/10.1016/j.procir.2016.07.036
- Mir, H.; Fafard, M.; Bissonnette, B.; Dano, M. 2005, Damage modeling in random short glass fiber reinforced composites including permanent strain and unilateral effect. Journal of Applied Mechanics 72(2): 249–258. doi:https://doi.org/10.1115/1.1839593
- Mkaddem, A.; El Mansori, M. 2009, Finite element analysis when machining UGF-reinforced PMCs plates: Chip formation, crack propagation and induced-damage. Materials & DesignDesign30(8): 3295–3302. doi:https://doi.org/10.1016/j.matdes.2008.12.009
- Morozov, E.V.; Morozov, K.E.; Selvarajalu, V. 2003, Progressive damage modelling of SMC composite materials. Composite Structures 62(3-4): 361–366. doi:https://doi.org/10.1016/j.compstruct.2003.09.037
- Moufki, A.; Dudzinski, D.; Molinari, A.; Rausch, M. 2000, Thermoviscoplastic modelling of oblique cutting: Forces and chip flow predictions. International Journal of Mechanical Sciences 42(6): 1205–1232. doi:https://doi.org/10.1016/S0020-7403(99)00036-3
- Nayak, D.; Bhatnagar, N.; Mahajan, P. 2005a, Machining studies of UD-FRP composites part 2: Finite element analysis. Machining Science and Technology 9(4): 503–528. doi:https://doi.org/10.1080/10910340500398183
- Nayak, D.; Bhatnagar, N.; Mahajan, P. 2005b, Machining studies of uni-directional glass fiber reinforced plastic (UD-GFRP) composites part 1: Effect of geometrical and process parameters. Machining Science and Technology 9(4): 481–501. doi:https://doi.org/10.1080/10910340500398167
- Ozlu, E.; Budak, E.; Molinari, A. 2009, Analytical and experimental investigation of rake contact and friction behavior in metal cutting. International Journal of Machine Tools and Manufacture 49(11): 865–875. doi:https://doi.org/10.1016/j.ijmachtools.2009.05.005
- Pal, A.K.; Koenigsberger, F. (1968). Some Aspects of the Oblique Cutting Process, vol. 8: 45–57. Pergamon Press. doi:https://doi.org/10.1016/0020-7357(68)90010-3
- Schulze, V.; Becke, C.; Pabst, R. 2011, Specific machining forces and resultant force vectors for machining of reinforced plastics. CIRP Annals 60(1): 69–72. doi:https://doi.org/10.1016/j.cirp.2011.03.085
- Shchurov, I.A.; Nikonov, A.V.; Boldyrev, I.S. 2016, SPH- Simulation of the fiber-reinforced composite workpiece cutting for the surface quality improvement. Procedia Engineering 150: 860–865. doi:https://doi.org/10.1016/j.proeng.2016.07.029
- Soldani, X.; Santiuste, C.; Muñoz-Sánchez, A.; Miguélez, M.H. 2011, Influence of tool geometry and numerical parameters when modeling orthogonal cutting of LFRP composites. Composites Part A Applied Science and Manufacturing. 42(9): 1205–1216. doi:https://doi.org/10.1016/j.compositesa.2011.04.023
- Sui, J.; Sugita, N.; Ishii, K.; Harada, K.; Mitsuishi, M. 2013, Force analysis of orthogonal cutting of bovine cortical bone. Machining Science and Technology 17(4): 637–649. doi:https://doi.org/10.1080/10910344.2013.837355
- Takeyama, H.; Iijima, N. 1988, Machinability of glassfiber reinforced plastics and application of ultrasonic machining. CIRP Annals 37(1): 93–96. doi:https://doi.org/10.1016/S0007-8506(07)61593-5
- Vallejo, M.J.; Tarefder, R.A. 2011, Predicting failure behavior of polymeric composites using a unified constitutive model. Journal of Mechanics 27(3): 379–388. doi:https://doi.org/10.1017/jmech.2011.40
- Venu Gopala Rao, G.; Mahajan, P.; Bhatnagar, N. 2008, Three-dimensional macro-mechanical finite element model for machining of unidirectional-fiber reinforced polymer composites. Materials Science and Engineering: A 498(1-2): 142–149. doi:https://doi.org/10.1016/j.msea.2007.11.157
- Wang, D.; He, X.; Xu, Z.; Jiao, W.; Yang, F.; Jiang, L.; Wang, R. 2017, Study on damage evaluation and machinability of UD-CFRP for the orthogonal cutting operation using scanning acoustic microscopy and the finite element method. Materials 10(1): 1–20. doi:https://doi.org/10.3390/ma10020204
- Wang, X.M.; Zhang, L.C. 2003, An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. International Journal of Machine Tools and Manufacture 43(10): 1015–1022. doi:https://doi.org/10.1016/S0890-6955(03)00090-7
- Xu, J.; Mansori, M.E.; Chen, M.; Ren, F. 2019, Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks. The International Journal of Advanced Manufacturing Technology 103 (9-12): 3831–3466. doi:https://doi.org/10.1007/s00170-019-03734-x
- Yang, D.; Wan, Z.; Xu, P.; Lu, L. 2018, Rake angle effect on a machined surface in orthogonal cutting of graphite/polymer composites. Advances in Materials Science and Engineering 2018: 1–8. doi:https://doi.org/10.1155/2018/3601918
- Zenia, S.; Ayed, L.B.; Nouari, M.; Delamézière, A. 2015, Numerical prediction of the chip formation process and induced damage during the machining of carbon/epoxy composites. International Journal of Mechanical Sciences 90: 89–101. doi:https://doi.org/10.1016/j.ijmecsci.2014.10.018
- Zitoune, R.; Collombet, F.; Lachaud, F.; Piquet, R.; Pasquet, P. 2005, Experiment-calculation comparison of the cutting conditions representative of the long fiber composite drilling phase. Composites Science and Technology 65(3-4): 455–466. doi:https://doi.org/10.1016/j.compscitech.2004.09.028