The evaluation of machining performances and recast layer properties of AISI H13 steel processed by tungsten carbide powder mixed EDM process in the semi-finishing process

References

• Abbas, N.M.; Solomon, D.G.; Bahari, M.F. (2007) A review on current research trends in electrical discharge machining (EDM). International Journal of Machine Tools and Manufacture, 47(7–8): 1214–1228. doi:10.1016/j.ijmachtools.2006.08.026
   Web of Science ®Google Scholar
• Al-Khazraji, A.; Amin, S.A.; Ali, S.M. (2016) The effect of SiC powder mixing electrical discharge machining on white layer thickness, heat flux and fatigue life of AISI D2 die steel. Engineering Science and Technology, an International Journal, 19(3): 1400–1415. doi:10.1016/j.jestch.2016.01.014
   Google Scholar
• Amorim, F.L.; Dalcin, V.A.; Soares, P.; Mendes, L.A. (2017) Surface modification of tool steel by electrical discharge machining with molybdenum powder mixed in dielectric fluid. The International Journal of Advanced Manufacturing Technology, 91(1–4): 341–350. doi:10.1007/s00170-016-9678-x
   Web of Science ®Google Scholar
• Bai, X.; Zhang, Q.; Zhang, J.; Kong, D.; Yang, T. (2013) Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode. Journal of Manufacturing Processes, 15(4): 474–482. doi:10.1016/j.jmapro.2013.09.005
   Web of Science ®Google Scholar
• Banh, T.L.; Nguyen, H.P.; Ngo, C.; Nguyen, D.T. (2018) Characteristics optimization of powder mixed electric discharge machining using titanium powder for die steel materials. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 232(3): 281–298. doi:10.1177/0954408917693661
   Web of Science ®Google Scholar
• Baseri, H.; Sadeghian, S. (2016) Effects of nanopowder TiO2-mixed dielectric and rotary tool on EDM. The International Journal of Advanced Manufacturing Technology, 83(1–4): 519–528. doi:10.1007/s00170-015-7579-z
   Web of Science ®Google Scholar
• Bhattacharya, A.; Batish, A.; Kumar, N. (2013) Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process. Journal of Mechanical Science and Technology, 27(1): 133–140. doi:10.1007/s12206-012-0883-8
   Web of Science ®Google Scholar
• Bhattacharya, A.; Batish, A.; Singh, G.; Singla, V.K. (2012) Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM. The International Journal of Advanced Manufacturing Technology, 61(5–8): 537–548. doi:10.1007/s00170-011-3716-5
   Web of Science ®Google Scholar
• Bilal, A.; Muhammad, J.; Didier, T.; Perveen, A. (2018) Electro-discharge machining of ceramics: A review. Micromachines, 10(1): 10. doi:10.3390/mi10010010
   Web of Science ®Google Scholar
• Bui, V.D.; Mwangi, J.W.; Meinshausen, A.K.; Mueller, A.J.; Bertrand, J.; Schubert, A. (2020) Antibacterial coating of Ti-6Al-4V surfaces using silver nano-powder mixed electrical discharge machining. Surface and Coatings Technology, 383: 125254. doi:10.1016/j.surfcoat.2019.125254
   Web of Science ®Google Scholar
• Bui, V.D.; Mwangi, J.W.; Schubert, A. (2019) Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces. Journal of Manufacturing Processes, 44: 261–270. doi:10.1016/j.jmapro.2019.05.032
   Web of Science ®Google Scholar
• Chakraborty, S.; Siddhartha, K.; Vidyut, D.; Subrata, K.G. (2018) The phenomenon of surface modification by electro-discharge coating process: A review. Surface Review and Letters, 25(1): 1830003–1830012. doi:10.1142/S0218625X18300034
   Web of Science ®Google Scholar
• Chen, W.; Zhang, D.; Yao, D.; Zhang, S.; Wu, W. (2017) Investigations on microstructure and mechanical properties of containing-Si coatings. Surface Engineering, 33(7): 536–541. doi:10.1080/02670844.2017.1287837
   Web of Science ®Google Scholar
• Chen, Y.; Lin, Y. (2009) Surface modifications of Al – Zn – Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric. Journal of Materials Processing Technology, 209(9): 4343–4350. doi:10.1016/j.jmatprotec.2008.11.013
   Web of Science ®Google Scholar
• Davim, J.P. (2013) Nontraditional Machining Processes, J. Paulo Davim (Ed.). Springer London, London. doi:10.1007/978-1-4471-5179-1
   Google Scholar
• Devarani, N.; Joshi, S.N. (2021) Electric discharge alloying of titanium and aluminium on AISI P20 mold steel. Surface and Coatings Technology, 405: 126515. doi:10.1016/j.surfcoat.2020.126515
   Web of Science ®Google Scholar
• Ekmekci, B.; Yaşar, H.; Ekmekci, N. (2016) A discharge separation model for powder mixed electrical discharge machining. Journal of Manufacturing Science and Engineering, 138(8): 1–9. doi:10.1115/1.4033042
   Web of Science ®Google Scholar
• Furutani, K.; Saneto, A.; Takezawa, H.; Mohri, N.; Miyake, H. (2001) Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid. Precision Engineering, 25(2): 138–144. doi:10.1016/S0141-6359(00)00068-4
   Web of Science ®Google Scholar
• Guu, Y.H.; Hou, M.T.K. (2007) Effect of machining parameters on surface textures in EDM of Fe-Mn-Al alloy. Materials Science and Engineering: A, 466(1–2): 61–67. doi:10.1016/j.msea.2007.02.035
   Web of Science ®Google Scholar
• Ho, K.H.; Newman, S.T. (2003) State of the art electrical discharge machining (EDM). International Journal of Machine Tools and Manufacture, 43(13): 1287–1300. doi:10.1016/S0890-6955(03)00162-7
   Web of Science ®Google Scholar
• Hosni, N.A.J.; Lajis, M.A. (2020) Experimental investigation and economic analysis of surfactant (Span-20) in powder mixed electrical discharge machining (PMEDM) of AISI D2 hardened steel. Machining Science and Technology, 24(3): 398–424. doi:10.1080/10910344.2019.1698609
   Web of Science ®Google Scholar
• Hossain, M.M.; Karim, M.S.B.A.; Hoong, W.Y.; Shukor, M.H.B.A.; Talip, M.S.B.A. (2020) Feasibility of using CeO2/water dielectrical nanofluid in electrical discharge machining (EDM). Arabian Journal for Science and Engineering, 45(7): 5435–5445. doi:10.1007/s13369-020-04404-x
   Web of Science ®Google Scholar
• Jabbaripour, B.; Hossein, M.; Reza, M.; Faraji, H. (2013) Investigating surface roughness, material removal rate and corrosion resistance in PMEDM of ϒ-TiAl intermetallic. Journal of Manufacturing Processes, 15(1): 56–68. doi:10.1016/j.jmapro.2012.09.016
   Web of Science ®Google Scholar
• Jadam, T.; Sahu, S.K.; Datta, S.; Masanta, M. (2019) EDM performance of Inconel 718 superalloy: Application of multi-walled carbon nanotube (MWCNT) added dielectric media. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(8): 305. doi:10.1007/s40430-019-1813-9
   Web of Science ®Google Scholar
• Kansal, H.K.; Singh, S.; Kumar, P. (2006) An experimental study of the machining parameters in powder mixed electric discharge machining of Al-10%SiCP metal matrix composites. International Journal of Machining and Machinability of Materials, 1(4): 396–411. doi:10.1504/IJMMM.2006.012349
   Google Scholar
• Kolli, M.; Kumar, A. (2017) Surfactant and graphite powder-assisted electrical discharge machining of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(4): 641–657. doi:10.1177/0954405415579019
   Web of Science ®Google Scholar
• Kumar, S.; Batra, U. (2012) Surface modification of die steel materials by EDM method using tungsten powder-mixed dielectric. Journal of Manufacturing Processes, 14(1): 35–40. doi:10.1016/j.jmapro.2011.09.002
   Google Scholar
• Kunieda, M.; Lauwers, B.; Rajurkar, K.P.; Schumacher, B.M. (2005) Advancing EDM through fundamental insight into the process. CIRP Annals, 54(2): 64–87. doi:10.1016/S0007-8506(07)60020-1
   Web of Science ®Google Scholar
• Le, V.T. (2021a) Influence of processing parameters on surface properties of SKD61 steel processed by powder mixed electrical discharge machining. Journal of Materials Engineering and Performance, 30(4): 3003–3023. doi:10.1007/s11665-021-05584-9
   Web of Science ®Google Scholar
• Le, V.T. (2021b) The role of electrical parameters in adding powder influences the surface properties of SKD61 steel in EDM process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(3): 120. doi:10.1007/s40430-021-02844-6
   Web of Science ®Google Scholar
• Le, V.T.; Banh, T.L.; Tran, X.T.; Nguyen, T.H.M.; Le, V.T. (2020) Studying the microhardness on the surface of SKD61 in PMEDM using tungsten carbide powder. International Journal of Modern Physics B, 34(22n24): 2040164. doi:10.1142/S0217979220401645
   Google Scholar
• Le, V.T.; Banh, T.L.; Tran, X.T.; Nguyen, T.H.M. (2019) Improving surface roughness by electrical discharge machining with tungsten powder. ASEAN Engineering Journal, 9(1): 44–53. doi:10.11113/aej.v9.15507
   Google Scholar
• Le, V.T. (2021c) The machined performance and recast layer properties of AISI H13 steel processed by powder mixed EDM process: An investigation and comparison in fine-finishing and semi-finishing processes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(11): 514. doi:10.1007/s40430-021-03243-7
   Web of Science ®Google Scholar
• Le, V.T. (2021d) The influence of additive powder on machinability and surface integrity of SKD61 steel by EDM process. Materials and Manufacturing Processes, 36(9): 1084–1098. doi:10.1080/10426914.2021.1885710
   Web of Science ®Google Scholar
• Le, V.T. (2022) An investigation on machined performance and recast layer properties of AISI H13 steel by powder mixed-EDM in fine-finishing process. Materials Chemistry and Physics, 276: 125362. doi:10.1016/j.matchemphys.2021.125362
   Web of Science ®Google Scholar
• Lee, H.T.; Tai, T.Y. 2003, Relationship between EDM Parameters and Surface Crack Formation. Journal of Materials Processing Technology, 142(3): 676–683. doi:10.1016/S0924-0136(03)00688-5
   Web of Science ®Google Scholar
• Li, L.; Zhao, L.; Li, Z.Y.; Feng, L.; Bai, X. 2017, Surface characteristics of Ti-6Al-4V by SiC abrasive-mixed EDM with magnetic stirring. Materials and Manufacturing Processes, 32(1): 83–86. doi:10.1080/10426914.2016.1151043
   Web of Science ®Google Scholar
• Jahan, M.P. (2016) Electrical Discharge Machining. Nova, New York.
   Google Scholar
• Mohanty, S.; Das, A.K.; Dixit, A.R. (2021) Surface integrity and residual stress analysis of μEDM coated Ti-alloy miniature components. Materials and Manufacturing Processes, 36(1): 48–58. doi:10.1080/10426914.2020.1813894
   Web of Science ®Google Scholar
• Mohanty, S.; Kumar, V.; Das, A.K.; Dixit, A.R. (2019) Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension. Journal of Manufacturing Processes, 37: 28–41. doi:10.1016/j.jmapro.2018.11.007
   Web of Science ®Google Scholar
• Molinetti, A.; Amorim, F.L.; Soares Jr., P.C.; Czelusniak, T. (2016) Surface modification of AISI H13 tool steel with silicon or manganese powders mixed to the dielectric in electrical discharge machining process. The International Journal of Advanced Manufacturing Technology, 83(5–8): 1057–1068. doi:10.1007/s00170-015-7613-1
   Web of Science ®Google Scholar
• Muthuramalingam, T.; Mohan, B. (2013) Influence of tool electrode properties on machinability in spark erosion machining influence of tool electrode properties on machinability in spark erosion machining. Materials and Manufacturing Processes, 28(8): 130122112650006–130122112650943. doi:10.1080/10426914.2013.763973
   Web of Science ®Google Scholar
• Nguyen, T.D.; Nguyen, H.P.; Banh, T.L. (2019) Die steel surface layer quality improvement in titanium μ-powder mixed die sinking electrical discharge machining. The International Journal of Advanced Manufacturing Technology, 100(9–12): 2637–2651. doi:10.1007/s00170-018-2887-8
   Web of Science ®Google Scholar
• Öpöz, T.T.; Yaşar, H.; Ekmekci, N.; Ekmekci, B. (2018) Particle migration and surface modification on Ti6Al4V in SiC powder mixed electrical discharge machining. Journal of Manufacturing Processes, 31: 744–758. doi:10.1016/j.jmapro.2018.01.002
   Web of Science ®Google Scholar
• Pachaury, Y.; Tandon, P. (2017) An overview of electric discharge machining of ceramics and ceramic based composites. Journal of Manufacturing Processes, 25: 369–390. doi:10.1016/j.jmapro.2016.12.010
   Web of Science ®Google Scholar
• Philip, J.T.; Mathew, J.; Kuriachen, B. (2021) Transition from EDM to PMEDM – Impact of suspended particulates in the dielectric on Ti6Al4V and other distinct material surfaces: A review. Journal of Manufacturing Processes, 64: 1105–1142. doi:10.1016/j.jmapro.2021.01.056
   Web of Science ®Google Scholar
• Prakash, C.; Kansal, H.K.; Pabla, B.S.; Puri, S. (2017) Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy. Materials and Manufacturing Processes, 32(3): 274–285. doi:10.1080/10426914.2016.1198018
   Web of Science ®Google Scholar
• Prakash, V.; Kumar, P.; Singh, P.K.; Das, A.K.; Chattopadhyaya, S.; Mandal, A.; Dixit, A.R. (2018) Surface alloying of miniature components by micro-electrical discharge process. Materials and Manufacturing Processes, 33(10): 1051–1061. doi:10.1080/10426914.2017.1364755
   Web of Science ®Google Scholar
• Prihandana, G.S.; Mahardika, M.; Hamdi, M.; Wong, Y.S.; Mitsui, K. (2009) Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes — Taguchi approach. International Journal of Machine Tools and Manufacture, 49(12–13): 1035–1041. doi:10.1016/j.ijmachtools.2009.06.014
   Web of Science ®Google Scholar
• Rouniyar, A.K.; Shandilya, P. (2020) Experimental investigation on recast layer and surface roughness on aluminum 6061 alloy during magnetic field assisted powder mixed electrical discharge machining. Journal of Materials Engineering and Performance, 29(12): 7981–7992. doi:10.1007/s11665-020-05244-4
   Web of Science ®Google Scholar
• Sahu, S.K.; Jadam, T.; Datta, S.; Nandi, G. (2018) Effect of using SiC powder-added dielectric media during electro-discharge machining of inconel 718 superalloys. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7): 330. doi:10.1007/s40430-018-1257-7
   Web of Science ®Google Scholar
• Sahu, K.S.; Jadam, T.; Datta, S.; Dhupal, D.; Nandi, G. (2018) Application of SiC power added in kerosene dielectric media for electro-discharge machining of inconel 718 super alloys: Effect of powder concentration. Materials Today: Proceedings, 5(9): 20297–20305. doi:10.1016/j.matpr.2018.06.402
   Google Scholar
• Shabgard, M.; Khosrozadeh, B. (2017) Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process. Journal of Manufacturing Processes, 25: 212–219. doi:10.1016/j.jmapro.2016.11.016
   Web of Science ®Google Scholar
• Sharma, D.; Mohanty, S.; Das, A.K. (2020) Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining. Surface and Coatings Technology, 381: 125157. doi:10.1016/j.surfcoat.2019.125157
   Web of Science ®Google Scholar
• Schumacher, B.M. (2004) After 60 years of EDM the discharge process remains still disputed. Journal of Materials Processing Technology, 149(1–3): 376–381. doi:10.1016/j.matprotec.2003.11.060
   Web of Science ®Google Scholar
• Świercz, R.; Oniszczuk-świercz, D. (2019) The effects of reduced graphene oxide flakes in the dielectric on electrical discharge machining. Nanomaterials, 9(3): 335–316. doi:10.3390/nano9030335
   Web of Science ®Google Scholar
• Talla, G.; Gangopadhayay, S.; Biswas, C.K. (2017) State of the art in powder-mixed electric discharge machining: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(14): 2511–2526. doi:10.1177/0954405416634265
   Web of Science ®Google Scholar
• Talla, G.; Gangopadhyay, S.; Biswas, C.K. (2016) Effect of powder-suspended dielectric on the EDM characteristics of inconel 625. Journal of Materials Engineering and Performance, 25(2): 704–717. doi:10.1007/s11665-015-1835-0
   Web of Science ®Google Scholar
• Tripathy, S.; Tripathy, D.K. (2017a) Multi-response optimization of machining process parameters for powder mixed electro-discharge machining of H-11 die steel using grey relational analysis and topsis. Machining Science and Technology, 21(3): 362–384. doi:10.1080/10910344.2017.1283957
   Web of Science ®Google Scholar
• Tripathy, S.; Tripathy, D.K. (2017b) An approach for increasing the micro-hardness in electrical discharge machining by adding conductive powder to the dielectric. Materials Today: Proceedings, 4(2): 1215–1224. doi:10.1016/j.matpr.2017.01.140
   Google Scholar
• Tripathy, S.; Tripathy, D.K. (2016) Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis. Engineering Science and Technology, an International Journal, 19(1): 62–70. doi:10.1016/j.jestch.2015.07.010
   Google Scholar
• Tyagi, R.; Das, A.K.; Mandal, A. (2018) Electrical discharge coating using WS2 and Cu powder mixture for solid lubrication and enhanced tribological performance. Tribology International, 120: 80–92. doi:10.1016/j.triboint.2017.12.023
   Web of Science ®Google Scholar
• Tyagi, R.; Mahto, N.K.; Das, A.K.; Mandal, A. (2020) Preparation of MoS2 +Cu coating through the EDC process and its analysis. Surface Engineering, 36(1): 86–93. doi:10.1080/02670844.2019.1615744
   Web of Science ®Google Scholar
• Upadhyay, C.; Datta, S.; Masanta, M.; Mahapatra, S.S. (2017) An experimental investigation emphasizing surface characteristics of electro ‑ discharge ‑ machined inconel 601. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(8): 3051–3066. doi:10.1007/s40430-016-0643-2
   Web of Science ®Google Scholar
• Wang, J.; Han, F. (2014) Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining. International Journal of Machine Tools and Manufacture, 77: 56–65. doi:10.1016/j.ijmachtools.2013.10.007
   Web of Science ®Google Scholar
• Wu, K.L.; Yan, B.H.; Huang, F.Y.; Chen, S.C. (2005) Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric. International Journal of Machine Tools and Manufacture, 45(10): 1195–1201. doi:10.1016/j.ijmachtools.2004.12.005
   Web of Science ®Google Scholar
• Xia, H.; Kunieda, M.; Aki, N.N. (1996) Removal amount difference between anode and cathode in EDM process. International Journal of Electrical Machining, 1: 45–52. doi:10.2526/ijem.1.45
   Google Scholar
• Zhao, W.S.; Meng, Q.G.; Wang, Z.L. (2002) The application of research on powder mixed EDM in rough machining. Journal of Materials Processing Technology, 129(1–3): 30–33. doi:10.1016/S0924-0136(02)00570-8
   Web of Science ®Google Scholar