Flow field design and simulation in electrochemical machining for closed integral components

References

• Ali, P.; Walia, R.S.; Murtaza, Q.; Ranganath Muttanna, S. (2020) Material removal analysis of hybrid edm-assisted centrifugal abrasive flow machining process for performance enhancement. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(6): 302. 10.1007/s40430-020-02375-6
   Web of Science ®Google Scholar
• Cao, W.J.; Wang, D.Y.; Guo, H.T.; Zhu, D. (2023) Improvement on profile accuracy of convex structure during counter-rotating electrochemical machining by periodically changing electrolyte flow direction. Journal of Manufacturing Processes, 102: 79–94. 10.1016/j.jmapro.2023.07.007
   Web of Science ®Google Scholar
• Chen, Y.L.; Guo, C.H.; Chen, P.X.; Liu, Z.; Lv, A.S. (2020) Flow field analysis and experimental investigation of electrochemical etching. Key Engineering Materials, 841: 369–374. 10.4028/www.scientific.net/KEM.841.369
   Google Scholar
• Chen, Y.L.; Liu, Z.; Zhang, J.C.; Wang, Y.D. (2018) Multi-physics coupling simulation of Precise Electrochemical Machining (PECM) with pulsed current and vibrating cathode. IOP Conference Series: Materials Science and Engineering, 392: 032020. 10.1088/1757-899X/392/3/032020
   Google Scholar
• Dančová, P.; Sawicki, J.; Paczkowski, T.; Vít, T. (2014) Effect of the hydrodynamic conditions of electrolyte flow on critical states in electrochemical machining. Proc. 9th International Conference on Experimental Fluid Mechanics, Cesky Krumlov, Czech Republic, November 2014, 92.
   Google Scholar
• Fu, Y.Z.; Gao, H.; Wang, X.P.; Guo, D.M. (2017) Machining the integral impeller and blisk of aero-engines: a review of surface finishing and strengthening technologies. Chinese Journal of Mechanical Engineering, 30(3): 528–543. 10.1007/s10033-017-0123-3
   Web of Science ®Google Scholar
• Fuchs, E.; Köhler, H.; Majschak, J.P. (2019) Measurement of the impact force and pressure of water jets under the influence of jet break‐up. Chemie Ingenieur Technik, 91(4): 455–466. 10.1002/cite.201800077
   Web of Science ®Google Scholar
• García-García, V.; Camacho-Arriaga, J.C.; Reyes-Calderón, F.; Castañeda-Morales, C.E. (2018) Fluid structure interaction modeling of expansion-contraction deformation during welding in a spacer-band-blade assembly of a hp steam turbine diaphragm. Journal of Manufacturing Processes, 33: 203–218. 10.1016/j.jmapro.2018.05.009
   Web of Science ®Google Scholar
• González-Barrio, H.; Calleja-Ochoa, A.; Lamikiz, A.; López de Lacalle, L.N. (2020) Manufacturing processes of integral blade rotors for turbomachinery, processes and new approaches. Applied Sciences, 10(9): 3063. 10.3390/app10093063
   Google Scholar
• Heidemanns, L.; Herrig, T.; Klink, A. (2022) Advancing electrochemical machining by the use of additive manufacturing for cathode production. Procedia CIRP, 112: 328–333. 10.1016/j.procir.2022.09.005
   Google Scholar
• Jain, V.K.; Chouksey, A.K. (2018) A Comprehensive analysis of three-phase electrolyte conductivity during electrochemical macromachining/micromachining. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 232(14): 2449–2461. 10.1177/0954405417690558
   Web of Science ®Google Scholar
• Jain, V.K.; Rajurkar, K.P. (1991) An integrated approach for tool design in ECM. Precision Engineering, 13(2): 111–124. 10.1016/0141-6359(91)90502-A
   Web of Science ®Google Scholar
• Jia, Y.C.; Chi, G.X.; Shen, Y.; Zhang, K.; Wang, Z.L.; Wang, Y.K. (2021) Electrode design using revolving entity extraction for high-efficiency electric discharge machining of integral shrouded blisk. Chinese Journal of Aeronautics, 34(6): 178–187. 10.1016/j.cja.2020.09.009
   Web of Science ®Google Scholar
• Jing, J.T.; Zhao, H.; Liu, Y.F.; Li, X.Q.; Liu, Z.L. (2011) Tool path planning in finish-milling process for integrally-shrouded impeller channels with rings. 2011 International Conference on Electronic & Mechanical Engineering and Information Technology, Harbin, China, 1635–1638.
   Google Scholar
• Kang, X.M.; Liang, W.; Zhao, W.S.; Xu, H.H. (2018) Feeding with perturbations in the edm process of an integral shrouded blisk. The International Journal of Advanced Manufacturing Technology, 96(9-12): 3951–3957. 10.1007/s00170-018-1863-7
   Web of Science ®Google Scholar
• Klocke, F.; Herrig, T.; Zeis, M.; Klink, A. (2017) Modeling and simulation of the fluid flow in wire electrochemical machining with rotating tool (wire ECM). Proc. 20th International ESAFORM Conference on Material Forming, Dublin, Ireland, April 2017, 1896.
   Google Scholar
• Klocke, F.; Klink, A.; Veselovac, D.; Aspinwall, D.K.; Soo, S.L.; Schmidt, M.; Schilp, J.; Levy, G.; Kruth, J.P. (2014) Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes. CIRP Annals, 63(2): 703–726. 10.1016/j.cirp.2014.05.004
   Web of Science ®Google Scholar
• Klocke, F.; Zeis, M.; Klink, A. (2015) Interdisciplinary modelling of the electrochemical machining process for engine blades. CIRP Annals, 64(1): 217–220. 10.1016/j.cirp.2015.04.071
   Web of Science ®Google Scholar
• Kunar, S.; Bhattacharyya, B. (2018) Influence of various flow methods during fabrication of micro ellipse pattern by maskless electrochemical micromachining. Journal of Manufacturing Processes, 35: 700–714. 10.1016/j.jmapro.2018.09.005
   Web of Science ®Google Scholar
• Lad, V.N.; Murthy, Z.V.P. (2016) Effects of the geometric orientations of the nozzle exit on the breakup of free liquid jet. Journal of Mechanical Science and Technology, 30(4): 1625–1630. 10.1007/s12206-016-0318-z
   Web of Science ®Google Scholar
• Leese, R.; Ivanov, A. (2017) Electrochemical micromachining: review of factors affecting the process applicability in micro-manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(2): 195–207. 10.1177/0954405416640172
   Web of Science ®Google Scholar
• Li, Y.; Zhai, L.J.; Liu, J.Y. (2014) Research on electrode design and computer simulation of manufacturing shrouded turbine blisk by EDM. Applied Mechanics and Materials, 670-671: 577–581. 10.4028/www.scientific.net/AMM.670-671.577
   Google Scholar
• Liu, Y.; Liu, J.; Zhu, D. (2023) Flow field optimization of pulse dynamic electrochemical machining for serpentine channels on stainless steel plates. The International Journal of Advanced Manufacturing Technology, 129(7-8): 3563–3576. 10.1007/s00170-023-12415-9
   Google Scholar
• Luther, F.; Schaarschmidt, I.; Schubert, A.; Richter, M. (2023) Strömungscharakterisierung im arbeitsspalt beim magnetfeldüberlagerten elektrochemischen abtragen. TM - Technisches Messen, 90(5): 268–281. 10.1515/teme-2022-0109
   Google Scholar
• Mi, D.H.; Luo, H.P.; Natsu, W. (2018) Investigation of influence factors of surface roughness at corner area in ECM process. Procedia CIRP, 68: 709–712. 10.1016/j.procir.2017.12.142
   Google Scholar
• Mi, D.H.; Xing, H.C.; and Natsu, W. (2022) Simulation investigation of influence of particle focusing on the machined surface of ECM process. Procedia CIRP, 113: 541–545. 10.1016/j.procir.2022.09.186
   Google Scholar
• Minazetdinov, N.M. (2017) Cavitation flow of an ideal incompressible fluid in the electrochemical machining of metals. Journal of Applied Mathematics and Mechanics, 81(1): 29–35. 10.1016/j.jappmathmech.2017.07.004
   Google Scholar
• Mitchell, B.R.; Klewicki, J.C.; Korkolis, Y.P.; Kinsey, B.L. (2019) Normal impact force of rayleigh jets. Physical Review Fluids, 4(11): 113603. 10.1103/PhysRevFluids.4.113603
   Web of Science ®Google Scholar
• Reddy, M.S.; Jain, V.K.; Lal, G.K. (1988) Tool design for ECM: correction factor method. Journal of Engineering for Industry, 110(2): 111–118. 10.1115/1.3187858
   Web of Science ®Google Scholar
• Ren, Z.Y.; Wang, D.Y.; Cui, G.W.; Cao, W.J.; Zhu, D. (2021) Optimize the flow field during counter-rotating electrochemical machining of grid structures through an auxiliary internal fluid flow pattern. Precision Engineering, 72: 448–460. 10.1016/j.precisioneng.2021.06.008
   Web of Science ®Google Scholar
• Sawicki, J. (2019) Electrochemical machining of conical surfaces. Proc. 25th International Conference on Engineering Mechanics, Svratka, Czech Republic, May 2019, 327–330.
   Google Scholar
• Tang, L.; Feng, X.; Zhao, G.G.; Li, Q.L.; Zhao, J.S.; Ren, L. (2018) Cathode cross tank and return hole optimization design and experiment verification of electrochemical machining closed integral impeller outside flow channels. The International Journal of Advanced Manufacturing Technology, 97(5-8): 2921–2931. 10.1007/s00170-018-2132-5
   Web of Science ®Google Scholar
• Tang, L.; Zhu, Q.L.; Zhao, J.S.; Fan, Z.J. (2016) Research on the cathode design and experiments of electrochemical machining a closed impeller internal flow channel. The International Journal of Advanced Manufacturing Technology, 88(9-12): 2517–2525. 10.1007/s00170-016-8976-7
   Web of Science ®Google Scholar
• Thanh, N.C.; Wang, L.L. (2015) Physical and numerical model of flow through the spillways with a breast wall. KSCE Journal of Civil Engineering, 19(7): 2317–2324. 10.1007/s12205-015-0742-0
   Web of Science ®Google Scholar
• Wang, F.; Zhao, J.S.; Lv, Y.M.; Fu, X.Q.; Kang, M.; Tian, Z.J. (2019) Sheet cathode design and experimental study on the electrochemical machining of deep narrow slots in tb6 titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234(4): 801–813. 10.1177/0954405419883078
   Web of Science ®Google Scholar
• Wang, J.T.; Xu, Z.Y.; Zhu, D. (2023) Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap. Chinese Journal of Aeronautics, 36(4): 523–537. 10.1016/j.cja.2022.07.005
   Web of Science ®Google Scholar
• Wang, Q.Q.; Zhang, J.Z.; Qu, N.S.; Fang, X.L. (2022) Optimizing the cathode structure in electrochemical milling. Procedia CIRP, 113: 488–494. 10.1016/j.procir.2022.09.164
   Google Scholar
• Wu, R.; Zhang, D.W.; Song, Y.C. (2011) Cathode design for nc precision electrochemical machining integer impeller based on CFD. Proc. 2nd International Conference on Digital Manufacturing and Automation, Hunan, China, August 2011, 285–288.
   Google Scholar
• Xu, Z.Y.; Sun, L.Y.; Hu, Y.; Zhang, Z.C. (2013) Flow field design and experimental investigation of electrochemical machining on blisk cascade passage. The International Journal of Advanced Manufacturing Technology, 71(1-4): 459–469. 10.1007/s00170-013-5491-y
   Web of Science ®Google Scholar
• Yang, L.; Chai, L.H.; Liang, Y.F.; Zhang, Y.W.; Bao, C.L.; Liu, S.B.; Lin, J.P. (2015) Numerical simulation and experimental verification of gravity and centrifugal investment casting low pressure turbine blades for high Nb–Tial Alloy. Intermetallics, 66: 149–155. 10.1016/j.intermet.2015.07.006
   Web of Science ®Google Scholar
• Zhai, K.G.; Tang, L.; Liu, J.; Zhang, X.Y.; Yan, Y.N.; Feng, X. (2021) Study on improving the surface roughness of multi-stage internal cone hole by rotating magnetic field assisted electrochemical machining. The International Journal of Advanced Manufacturing Technology, 115(4): 1227–1236. 10.1007/s00170-021-06930-w
   Web of Science ®Google Scholar
• Zhao, J.S.; Qiu, Y.C.; Yuan, J.; Liu, C. (2022) Trajectory optimisation in electrical discharge machining of three-dimensional curved and twisted channels. Chinese Journal of Aeronautics, 35(4): 473–484. 10.1016/j.cja.2021.03.028
   Web of Science ®Google Scholar
• Zhu, D.; Zhu, D.; Xu, Z.Y.; Xu, Q.; Liu, J. (2009) Investigation on the flow field of w-shape electrolyte flow mode in electrochemical machining. Journal of Applied Electrochemistry, 40(3): 525–532. 10.1007/s10800-009-0024-y
   Web of Science ®Google Scholar
• Zoka, H.M.; Omidvar, A.; Khaleghi, H. (2012) A comparative assessment of a compressible reynolds stress model and some variant k-ε models for engine flow applications. Arabian Journal for Science and Engineering, 37(6): 1737–1749. 10.1007/s13369-012-0270-x
   Web of Science ®Google Scholar