Microscopic investigation on micro electric discharge milling of AA6063-SiC composites

References

• Alting, L.; Kimura, F.; Hansen, H.N.; Bissacco, G. (2003) Micro engineering. CIRP Annals Manufacturing Technology, 52(2): 635–657. doi: 10.1016/S0007-8506(07)60208-X.
   Web of Science ®Google Scholar
• Bains, P.S.; Sidhu, S.S.; Payal, H.S. (2016) Fabrication and machining of metal matrix composites: A review. Materials and Manufacturing Processes, 31(5): 553–573. doi: 10.1080/10426914.2015.1025976
   Web of Science ®Google Scholar
• Bang, Y.B.; Lee, K.M.; Oh, S. 2005, 5-Axis micro milling machine for machining micro parts. The International Journal of Advanced Manufacturing Technology, 25(9–10): 888–894. doi: 10.1007/s00170-003-1950-1.
   Web of Science ®Google Scholar
• Callister, W.D.; Rethwisch, D.G. (2014) Materials Science and Engineering. Hoboken, NJ: Wiley.
   Google Scholar
• Chawla, K.K. (2012) Metal matrix composites. In Composite Materials, 197–248. New York: Springer.
   Google Scholar
• Chen, P.; Hoshi, T. (1992) High-performance machining of SiC whisker-reinforced aluminium composite by self-propelled rotary tools. CIRP Annals, 41(1): 59–62. doi: 10.1016/S0007-8506(07)61152-4
   Google Scholar
• Karthikeyan, G.; Garg, A.K.; Ramkumar, J.; Dhamodaran, S. (2012) A microscopic investigation of machining behavior in ΜeD-milling process. The Journal of Manufacturing Processes, 14(3): 297–306. doi: 10.1016/j.jmapro.2012.01.003.
   Google Scholar
• Karthikeyan, G.; Ramkumar, J.; Dhamodaran, S.; Aravindan, S. (2010) Micro electric discharge milling process performance: An experimental investigation. International Journal of Machine Tools and Manufacture, 50(8): 718–727. doi: 10.1016/j.ijmachtools.2010.04.007.
   Web of Science ®Google Scholar
• Lin, J.T.; Bhattacharyya, D.; Lane, C. (1995) Machinability of a silicon carbide reinforced aluminium metal matrix composite. Wear, 181–183: 883–888. doi: 10.1016/0043-1648(95)90211-2
   Web of Science ®Google Scholar
• Liu, X.; DeVor, R.E.; Kapoor, S.G.; Ehmann, K.F. (2004) The mechanics of machining at the microscale: Assessment of the current state of the science. Journal of Manufacturing Science and Engineering, 126(4): 666–678. doi: 10.1115/1.1813469.
   Web of Science ®Google Scholar
• Manna, A.; Bhattacharayya, B. (2003) A study on machinability of Al/SiC-MMC. Journal of Materials Processing Technology, 140(1–3): 711–716. doi: 10.1016/S0924-0136(03)00905-1
   Google Scholar
• Masuzawa, T.; Tönshoff, H.K. (1997) Three-dimensional micromachining by machine tools. CIRP Annals, 46(2): 621–628. doi: 10.1016/S0007-8506(07)60882-8.
   Google Scholar
• Mohan, B.; Rajadurai, A.; Satyanarayana, K.G. (2004) Electric discharge machining of Al-SiC Metal matrix composites using rotary tube electrode. Journal of Materials Processing Technology, 153–154: 978–985. doi: 10.1016/j.jmatprotec.2004.04.347.
   Web of Science ®Google Scholar
• Müller, F.; Monaghan, J. (2000) Non-conventional machining of particle reinforced metal matrix composite. International Journal of Machine Tools and Manufacture, 40(9): 1351–1366. doi: 10.1016/S0890-6955(99)00121-2
   Web of Science ®Google Scholar
• Narasimhan, J.; Yu, Z.; Rajurkar, K.P. (2005) Tool wear compensation and path generation in micro and macro EDM. The Journal of Manufacturing Processes, 7(1): 75–82. doi: 10.1016/S1526-6125(05)70084-0
   Google Scholar
• Nicholls, C.J.; Boswell, B.; Davies, I.J.; Islam, M.N. (2017) Review of machining metal matrix composites. The International Journal of Advanced Manufacturing Technology, 90(9–12): 2429–2441. doi: 10.1007/s00170-016-9558-4.
   Web of Science ®Google Scholar
• Rajurkar, K.P.; Levy, G.; Malshe, A.; Sundaram, M.M.; McGeough, J.; Hu, X.; Resnick, R.; DeSilva, A. (2006) Micro and nano machining by electro-physical and chemical processes. CIRP Annals Manufacturing Technology, 55(2): 643–666. doi: 10.1016/j.cirp.2006.10.002.
   Web of Science ®Google Scholar
• Rajurkar, K.P.; Yu, Z.Y. (2000) 3d Micro-EDM using CAD/CAM. CIRP Annals, 49(1): 127–130. doi: 10.1016/S0007-8506(07)62911-4
   Google Scholar
• Seo, Y.W.; Kim, D.; Ramulu, M. (2006) Electrical discharge machining of functionally graded 15–35 Vol% SiCp/Al composites. Materials and Manufacturing Processes, 21(5): 479–487. doi: 10.1080/10426910500471482
   Web of Science ®Google Scholar
• Shanmuga Priyan, V.G.; Kanmani Subbu, S. (2023) Effect of ultrasonic treatment during stir casting on mechanical properties of {AA6063-SiC} composites. Materials Chemistry and Physics, 294: 126977. doi: 10.1016/j.matchemphys.2022.126977.
   Web of Science ®Google Scholar
• Shanmuga Priyan, V.G.; Kanmani Subbu, S. (2024) Effect of tool feed rate and tool rotation speed on the microchannel geometry of AA6063-SiC composites machined by micro ED milling. Advances in Materials and Processing Technologies, 0(0): 1–27. doi: 10.1080/2374068X.2024.2321701.
   Google Scholar
• Wang, C.C.; Yan, B.H. (2000) Blind-hole drilling of {Al$_2$O$_3$/6061Al} composite using rotary electro-discharge machining. Journal of Materials Processing Technology, 102(1–3): 90–102. doi: 10.1016/S0924-0136(99)00423-9
   Web of Science ®Google Scholar