References
- Aberoumand, S., and A. Jafarimoghaddam. 2017. Experimental study on synthesis, stability, thermal conductivity and viscosity of Cu–engine oil nanofluid. Journal of the Taiwan Institute of Chemical Engineers 71:315–22. doi: https://doi.org/10.1016/j.jtice.2016.12.035.
- Aberoumand, S., A. Jafarimoghaddam, M. Moravej, H. Aberoumand, and K. Javaherdeh. 2016. Experimental study on the rheological behavior of silver-heat transfer oil nanofluid and suggesting two empirical based correlations for thermal conductivity and viscosity of oil based nanofluids. Applied Thermal Engineering 101:362–72. doi: https://doi.org/10.1016/j.applthermaleng.2016.01.148.
- Afrand, M., K. N. Najafabadi, and M. Akbari. 2016. Effects of temperature and solid volume fraction on viscosity of SiO2-MWCNTs/SAE40 hybrid nanofluid as a coolant and lubricant in heat engines. Applied Thermal Engineering 102:45–54. doi: https://doi.org/10.1016/j.applthermaleng.2016.04.002.
- Ahmadi, H., A. Rashidi, S. S. Mohtasebi, and M. Alaei. 2013. Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive. International Journal of Industrial Chemistry 4 (1):28.
- Ahmadi, H., A. Rashidi, A. Nouralishahi, and S. S. Mohtasebi. 2013. Preparation and thermal properties of oil-based nanofluid from multi-walled carbon nanotubes and engine oil as nano-lubricant. International Communications in Heat and Mass Transfer 46:142–7.
- Ali, N., J. A. Teixeira, and A. Addali. 2018. A review on nanofluids: Fabrication, stability, and thermophysical properties. Journal of Nanomaterials 2018:1–33. doi: https://doi.org/10.1155/2018/6978130.
- Amirimehr, A., E. Ghasemi, and A. Fazlali. 2015. Rheological study of nickel ferrite ferrofluid.
- Asadi, A., M. Asadi, A. Rezaniakolaei, L. A. Rosendahl, and S. Wongwises. 2018. An experimental and theoretical investigation on heat transfer capability of Mg (OH) 2/MWCNT-engine oil hybrid nano-lubricant adopted as a coolant and lubricant fluid. Applied Thermal Engineering 129:577–86. doi: https://doi.org/10.1016/j.applthermaleng.2017.10.074.
- Asrul, M., N. Zulkifli, H. Masjuki, and M. Kalam. 2013. Tribological properties and lubricant mechanism of nanoparticle in engine oil. Procedia Engineering 68 (1):320–5. doi: https://doi.org/10.1016/j.proeng.2013.12.186.
- Attari, H., F. Derakhshanfard, and M. H. K. Darvanjooghi. 2017. Effect of temperature and mass fraction on viscosity of crude oil-based nanofluids containing oxide nanoparticles. International Communications in Heat and Mass Transfer 82:103–13. doi: https://doi.org/10.1016/j.icheatmasstransfer.2017.02.007.
- Basha, S. S. 2017. Preparation and experimental investigation of CUO nanoparticles based engine oils. International Journal of Scientific Research in Science and Technology 3 (3):2395.
- Choi, S., Z. Zhang, W. Yu, F. Lockwood, and E. Grulke. 2001. Anomalous thermal conductivity enhancement in nanotube suspensions. Applied Physics Letters 79 (14):2252–4. doi: https://doi.org/10.1063/1.1408272.
- Dardan, E., M. Afrand, and A. M. Isfahani. 2016. Effect of suspending hybrid nano-additives on rheological behavior of engine oil and pumping power. Applied Thermal Engineering 109:524–34. doi: https://doi.org/10.1016/j.applthermaleng.2016.08.103.
- Derakhshan, M., M. Akhavan-Behabadi, and S. Mohseni. 2015. Experiments on mixed convection heat transfer and performance evaluation of MWCNT–Oil nanofluid flow in horizontal and vertical microfin tubes. Experimental Thermal and Fluid Science 61:241–8. doi: https://doi.org/10.1016/j.expthermflusci.2014.11.005.
- Derakhshan, M. M., and M. Akhavan-Behabadi. 2016. Mixed convection of MWCNT–heat transfer oil nanofluid inside inclined plain and microfin tubes under laminar assisted flow. International Journal of Thermal Sciences 99:1–8. doi: https://doi.org/10.1016/j.ijthermalsci.2015.07.025.
- Ding, Y., H. Alias, D. Wen, and R. A. Williams. 2006. Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids). International Journal of Heat and Mass Transfer 49 (1-2):240–50. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2005.07.009.
- Esfe, M. H., M. Afrand, S. Gharehkhani, H. Rostamian, D. Toghraie, and M. Dahari. 2016. An experimental study on viscosity of alumina-engine oil: Effects of temperature and nanoparticles concentration. International Communications in Heat and Mass Transfer 76:202–8. doi: https://doi.org/10.1016/j.icheatmasstransfer.2016.05.013.
- Esfe, M. H., A. A. A. Arani, and S. Esfandeh. 2018. Improving engine oil lubrication in light-duty vehicles by using of dispersing MWCNT and ZnO nanoparticles in 5W50 as viscosity index improvers (VII). Applied Thermal Engineering 143:493–506. doi: https://doi.org/10.1016/j.applthermaleng.2018.07.034.
- Esfe, M. H., and S. Esfandeh. 2018. Investigation of rheological behavior of hybrid oil based nanolubricant-coolant applied in car engines and cooling equipments. Applied Thermal Engineering 131:1026–33. doi: https://doi.org/10.1016/j.applthermaleng.2017.11.105.
- Eswaraiah, V., V. Sankaranarayanan, and S. Ramaprabhu. 2011. Graphene-based engine oil nanofluids for tribological applications. ACS Applied Materials & Interfaces 3 (11):4221–7. doi: https://doi.org/10.1021/am200851z.
- Farbod, M., R. Kouhpeymani Asl, and A. R. Noghreh Abadi. 2015. Morphology dependence of thermal and rheological properties of oil-based nanofluids of CuO nanostructures. Colloids and Surfaces A: Physicochemical and Engineering Aspects 474:71–5. doi: https://doi.org/10.1016/j.colsurfa.2015.02.049.
- Fazlali, A., S. Lashkarara, and A. H. Mohammadi. 2014. rheological properties of paraffin-based CO3O4 nano-ferrofluid. Advances in Nanotechnology 11: 169–181.
- Ghasemi, R., A. Fazlali, and A. H. Mohammadi. 2018. Effects of TiO2 nanoparticles and oleic acid surfactant on the rheological behavior of engine lubricant oil. Journal of Molecular Liquids 268:925–30. doi: https://doi.org/10.1016/j.molliq.2018.07.002.
- Hamilton, R. L., and O. Crosser. 1962. Thermal conductivity of heterogeneous two-component systems. Industrial & Engineering Chemistry Fundamentals 1 (3):187–91. doi: https://doi.org/10.1021/i160003a005.
- Hezaveh, H., A. Fazlali, and I. Noshadi. 2012. Synthesis, rheological properties and magnetoviscos effect of Fe2O3/paraffin ferrofluids. Journal of the Taiwan Institute of Chemical Engineers 43 (1):159–64. doi: https://doi.org/10.1016/j.jtice.2011.07.003.
- Hosseini, S. M., A. Fazlali, E. Ghasemi, H. A. Moghaddam, and M. Salehi. 2010. Rheological properties of a γ-Fe2O3 paraffin-based ferrofluid. Journal of Magnetism and Magnetic Materials 322 (23):3792–6. doi: https://doi.org/10.1016/j.jmmm.2010.08.003.
- Hosseini, S. M., E. Ghasemi, A. Fazlali, and D. E. Henneke. 2012. The effect of nanoparticle concentration on the rheological properties of paraffin-based Co3O4 ferrofluids. Journal of Nanoparticle Research 14 (7):858. doi: https://doi.org/10.1007/s11051-012-0858-9.
- Ilyas, S. U., R. Pendyala, and M. Narahari. 2017. Stability and thermal analysis of MWCNT-thermal oil-based nanofluids. Colloids and Surfaces A: Physicochemical and Engineering Aspects 527:11–22. doi: https://doi.org/10.1016/j.colsurfa.2017.05.004.
- Jeffrey, D. J. 1973. Conduction through a random suspension of spheres. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences 335 (1602):355–67.
- Johra, F. T., J.-W. Lee, and W.-G. Jung. 2014. Facile and safe graphene preparation on solution based platform. Journal of Industrial and Engineering Chemistry 20 (5):2883–7. doi: https://doi.org/10.1016/j.jiec.2013.11.022.
- Katpatal, D. C., A. B. Andhare, and P. M. Padole. 2019. Viscosity behaviour and thermal conductivity prediction of CuO-blend oil based nano-blended lubricant. Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology 233 (8):1154–68.
- Kole, M., and T. Dey. 2011. Effect of aggregation on the viscosity of copper oxide–gear oil nanofluids. International Journal of Thermal Sciences 50 (9):1741–7. doi: https://doi.org/10.1016/j.ijthermalsci.2011.03.027.
- Kotia, A., A. Haldar, R. Kumar, P. Deval, and S. K. Ghosh. 2017. Effect of copper oxide nanoparticles on thermophysical properties of hydraulic oil-based nanolubricants. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39 (1):259–66. doi: https://doi.org/10.1007/s40430-016-0664-x.
- Lanje, A. S., S. J. Sharma, R. B. Pode, and R. S. Ningthoujam. 2010. Synthesis and optical characterization of copper oxide nanoparticles. Advances in Applied Science Research 1 (2):36–40.
- Lee, C.-G., Y.-J. Hwang, Y.-M. Choi, J.-K. Lee, C. Choi, and J.-M. Oh. 2009. A study on the tribological characteristics of graphite nano lubricants. International Journal of Precision Engineering and Manufacturing 10 (1):85–90. doi: https://doi.org/10.1007/s12541-009-0013-4.
- Maxwell, J. C. 1881. A treatise on electricity and magnetism: Pt. III. Magnetism. pt. IV. Electromagnetism. London: Clarendon Press.
- Mohammadi, S. K., S. G. Etemad, and J. Thibault. 2009. Measurement of thermal properties of suspensions of nanoparticles in engine oil. TechConnect Briefs 3, 74–7.
- Mousavi, S. B., S. Z. Heris, and P. Estellé. 2020. Experimental comparison between ZnO and MoS 2 nanoparticles as additives on performance of diesel oil-based nano lubricant. Scientific Reports 10 (1):1–17. doi: https://doi.org/10.1038/s41598-020-62830-1.
- Murshed, S., K. Leong, and C. Yang. 2008. Investigations of thermal conductivity and viscosity of nanofluids. International Journal of Thermal Sciences 47 (5):560–8. doi: https://doi.org/10.1016/j.ijthermalsci.2007.05.004.
- Rashidi, A., H. Ahmadi, S. S. Mohtasebi, and M. Pourkhalil. 2013. Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures. International Communications in Heat and Mass Transfer 48:178–82.
- Rehman, A. U., R. Mehmood, S. Nadeem, N. Akbar, and S. Motsa. 2017. Effects of single and multi-walled carbon nano tubes on water and engine oil based rotating fluids with internal heating. Advanced Powder Technology 28 (9):1991–2002. doi: https://doi.org/10.1016/j.apt.2017.03.017.
- Saeedinia, M., M. Akhavan-Behabadi, and P. Razi. 2012. Thermal and rheological characteristics of CuO–Base oil nanofluid flow inside a circular tube. International Communications in Heat and Mass Transfer 39 (1):152–9. doi: https://doi.org/10.1016/j.icheatmasstransfer.2011.08.001.
- Sepyani, K., M. Afrand, and M. H. Esfe. 2017. An experimental evaluation of the effect of ZnO nanoparticles on the rheological behavior of engine oil. Journal of Molecular Liquids 236:198–204. doi: https://doi.org/10.1016/j.molliq.2017.04.016.
- Sukkar, K. A., A. A. Karamalluh, and T. N. Jaber. 2019. Rheological and thermal properties of lubricating oil enhanced by the effect of CuO and TiO2 nano-additives. Al-Khwarizmi Engineering Journal 15 (2):24–33. doi: https://doi.org/10.22153/kej.2019.12.002.
- Thottackkad, M. V., P. Rajendrakumar, and K. P. Nair. 2014. Experimental studies on the tribological behaviour of engine oil (SAE15W40) with the addition of CuO nanoparticles. Industrial Lubrication and Tribology 66 (2):289–97. doi: https://doi.org/10.1108/ILT-01-2012-0006.
- Vakili-Nezhaad, G., and A. Dorany. 2009. Investigation of the effect of multiwalled carbon nanotubes on the viscosity index of lube oil cuts. Chemical Engineering Communications 196 (9):997–1007. doi: https://doi.org/10.1080/00986440902797865.
- Vasheghani, M., E. Marzbanrad, C. Zamani, M. Aminy, B. Raissi, T. Ebadzadeh, and H. Barzegar-Bafrooei. 2011. Effect of Al 2 O 3 phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil. Heat and Mass Transfer 47 (11):1401–5. doi: https://doi.org/10.1007/s00231-011-0806-8.
- Wang, B., X. Wang, W. Lou, and J. Hao. 2012. Thermal conductivity and rheological properties of graphite/oil nanofluids. Colloids and Surfaces A: Physicochemical and Engineering Aspects 414:125–31. doi: https://doi.org/10.1016/j.colsurfa.2012.08.008.
- Wen, D., and Y. Ding. 2004. Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions. International Journal of Heat and Mass Transfer 47 (24):5181–8. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.012.
- Wu, Y., W. Tsui, and T. Liu. 2007. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 262 (7-8):819–25. doi: https://doi.org/10.1016/j.wear.2006.08.021.