References
- Atmanli, A., E. Ileri, and N. Yilmaz. 2016. Optimization of diesel–butanol–vegetable oil blend ratios based on engine operating parameters. Energy 96:569–80. doi: https://doi.org/10.1016/j.energy.2015.12.091.
- Atmanli, A., E. Ileri, B. Yuksel, and N. Yilmaz. 2015. Extensive analyses of diesel–vegetable oil–n-butanol ternary blends in a diesel engine. Applied Energy 145:155–62. doi: https://doi.org/10.1016/j.apenergy.2015.01.071.
- Atmanlı, A., B. Yüksel, E. Ileri, and A. D. Karaoglan. 2015. Response surface methodology based optimization of diesel–n-butanol–cotton oil ternary blend ratios to improve engine performance and exhaust emission characteristics. Energy Conversion and Management 90:383–94. doi: https://doi.org/10.1016/j.enconman.2014.11.029.
- Bezerra, M. A., R. E. Santelli, E. P. Oliveira, L. S. Villar, and L. A. Escaleira. 2008. Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta 76 (5):965–77. doi: https://doi.org/10.1016/j.talanta.2008.05.019.
- Caligiuri, C., and M. Renzi. 2017. Combustion modelling of a dual fuel diesel–producer gas compression ignition engine. Energy Procedia 142:1395–400. doi: https://doi.org/10.1016/j.egypro.2017.12.525.
- Ciolkosz, D., and R. Wallace. 2011. A review of torrefaction for bioenergy feedstock production. Biofuels, Bioproducts and Biorefining 5 (3):317–29. doi: https://doi.org/10.1002/bbb.275.
- Das, S., D. Kashyap, P. Kalita, V. Kulkarni, and Y. Itaya. 2020. Clean gaseous fuel application in diesel engine: A sustainable option for rural electrification in India. Renewable and Sustainable Energy Reviews 117:109485. doi: https://doi.org/10.1016/j.rser.2019.109485.
- Farzad, S., M. A. Mandegari, and J. F. Görgens. 2016. A critical review on biomass gasification, co-gasification, and their environmental assessments. Biofuel Research Journal 3 (4):483–95. doi: https://doi.org/10.18331/BRJ2016.3.4.3.
- Homdoung, N., N. Tippayawong, and N. Dussadee. 2014. Effect of ignition timing advance on performance of a small producer gas engine. International Journal of Applied Engineering Research 9:2341–8.
- Homdoung, N., N. Tippayawong, and N. Dussadee. 2015a. Performance and emissions of a modified small engine operated on producer gas. Energy Conversion and Management 94:286–92.
- Homdoung, N., N. Tippayawong, and N. Dussadee. 2015b. Prediction of small spark ignited engine performance using producer gas as fuel. Case Studies in Thermal Engineering 5:98–103.
- Kumar, K., R. R. Gaur, R. D. Garg, and M. K. Gajendra Babu. 1984. A thermodynamic simulation model for a four stroke medium speed diesel engine. SAE Technical Paper SAE-TP-840850.
- Liang, X., B. Zhao, F. Zhang, and Q. Liu. 2019. Compact research for maritime selective catalytic reduction reactor based on response surface methodology. Applied Energy 254:113702. doi: https://doi.org/10.1016/j.apenergy.2019.113702.
- Mehrnoosh, D., H. A. Asghar, and M. A. Asghar. 2012. Thermodynamic model for prediction of performance and emission characteristics of SI engine fuelled by gasoline and natural gas with experimental verification. Journal of Mechanical Science and Technology 26 (7):2213–25. doi: https://doi.org/10.1007/s12206-012-0303-0.
- Mehta, A., and N. Mehta. 2019. Optimisation of performance parameters for biodiesel production with slow pyrolysis using response surface methodology. International Journal of Ambient Energy 42 (16):1823–1829.
- Mikulski, M., and S. Wierzbicki. 2017. Validation of a zero-dimensional and 2-phase combustion model for dual-fuel compression ignition engine simulation. Thermal Science 21 (1 Part B):387–99. doi: https://doi.org/10.2298/TSCI160127076M.
- Mojaver, P., S. Khalilarya, and A. Chitsaz. 2019. Multi-objective optimization using response surface methodology and exergy analysis of a novel integrated biomass gasification, solid oxide fuel cell and high-temperature sodium heat pipe system. Applied Thermal Engineering 156:627–39. doi: https://doi.org/10.1016/j.applthermaleng.2019.04.104.
- Pandian, M., S. P. Sivapirakasam, and M. Udayakumar. 2011. Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology. Applied Energy 88 (8):2663–76. doi: https://doi.org/10.1016/j.apenergy.2011.01.069.
- Parthasarathy, P., and K. S. Narayanan. 2014. Hydrogen production from steam gasification of biomass: Influence of process parameters on hydrogen yield–a review. Renewable Energy. 66:570–9. doi: https://doi.org/10.1016/j.renene.2013.12.025.
- Raman, P., and N. K. Ram. 2013. Performance analysis of an internal combustion engine operated on producer gas, in comparison with the performance of the natural gas and diesel engines. Energy 63:317–33. doi: https://doi.org/10.1016/j.energy.2013.10.033.
- Roy, D., S. Samanta, and S. Ghosh. 2020. Performance optimization through response surface methodology of an integrated biomass gasification based combined heat and power plant employing solid oxide fuel cell and externally fired gas turbine. Energy Conversion and Management 222:113182. doi: https://doi.org/10.1016/j.enconman.2020.113182.
- Saidur, R., E. A. Abdelaziz, A. Demirbas, M. S. Hossain, and S. Mekhilef. 2011. A review on biomass as a fuel for boilers. Renewable and Sustainable Energy Reviews 15 (5):2262–89. doi: https://doi.org/10.1016/j.rser.2011.02.015.
- Serrano, C., J. J. Hernandez, C. Mandilas, C. G. W. Sheppard, and R. Woolley. 2008. Laminar burning behaviour of biomass gasification-derived producer gas. International Journal of Hydrogen Energy 33 (2):851–62. doi: https://doi.org/10.1016/j.ijhydene.2007.10.050.
- Shahbaz, M., S. Yusup, A. Inayat, D. O. Patrick, A. Pratama, and M. Ammar. 2017. Optimization of hydrogen and syngas production from PKS gasification by using coal bottom ash. Bioresource Technology 241:284–95. doi: https://doi.org/10.1016/j.biortech.2017.05.119.
- Shivapuji, A. M., and S. Dasappa. 2017. Analysis of thermodynamic scope engine simulation model empirical coefficients: Suitability assessment and tuning of conventional hydrocarbon fuel coefficients for bio syngas. International Journal of Hydrogen Energy 42 (26):16834–54. doi: https://doi.org/10.1016/j.ijhydene.2017.05.166.
- Sikarwar, V. S., M. Zhao, P. Clough, J. Yao, X. Zhong, M. Z. Memon, N. Shah, E. J. Anthony, and P. S. Fennell. 2016. An overview of advances in biomass gasification. Energy & Environmental Science 9 (10):2939–77. doi: https://doi.org/10.1039/C6EE00935B.
- Simsek, S., and S. Uslu. 2020. Determination of a diesel engine operating parameters powered with canola, safflower and waste vegetable oil based biodiesel combination using response surface methodology (RSM). Fuel 270:117496. doi: https://doi.org/10.1016/j.fuel.2020.117496.
- Singh, H., and S. K. Mohapatra. 2018. Production of producer gas from sugarcane bagasse and carpentry waste and its sustainable use in a dual fuel CI engine: A performance, emission, and noise investigation. Journal of the Energy Institute 91 (1):43–54. doi: https://doi.org/10.1016/j.joei.2016.11.002.
- Sivalingam, M., S. Sekhar Mahapatra, D. Hansdah, and B. Horák. 2015. Validation of some engine combustion and emission parameters of a bioethanol fuelled DI diesel engine using theoretical modelling. Alexandria Engineering Journal 54 (4):993–1002. doi: https://doi.org/10.1016/j.aej.2015.09.003.
- Smith, L. C. 2010. The world in 2050: Four forces shaping civilization's northern future. New York: Penguin.
- Thermodynamics, Fluid Mechanics Group, and W. J. D. Annand. 1963. Heat transfer in the cylinders of reciprocating internal combustion engines. Proceedings of the Institution of Mechanical Engineers 177: 973–96.
- Tirkey, J. V. 2020. Simulation-based investigation of producer gas and propane blended SI engine for power generation application. International Journal of Sustainable Energy 40 (4):344–63.
- Tsiakmakis, S., D. Mertzis, A. Dimaratos, Z. Toumasatos, and Z. Samaras. 2014. Experimental study of combustion in a spark ignition engine operating with producer gas from various biomass feedstocks. Fuel 122:126–39. doi: https://doi.org/10.1016/j.fuel.2014.01.013.
- Verma, A., A. Raghuvansi, M. A. Quraishi, J. V. Tirkey, and C. Verma. 2018. Engine fuel production from waste plastic pyrolysis (WPO) and performance evaluation in a CI engine with diesel blend. Journal of Materials and Environmental Sciences 9:1712–21.
- Whitehouse, N. D., and B. K. Sareen. 1974. Prediction of heat release in a quiescent chamber diesel engine allowing for fuel/air mixing. SAE Technical Paper 740084. https://www.sae.org/publications/technical-papers/content/740084/
- Yaliwal, V. S., N. R. Banapurmath, N. M. Gireesh, R. S. Hosmath, T. Donateo, and P. G. Tewari. 2016. Effect of nozzle and combustion chamber geometry on the performance of a diesel engine operated on dual fuel mode using renewable fuels. Renewable Energy 93:483–501. doi: https://doi.org/10.1016/j.renene.2016.03.020.