Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 2, 1998 - Issue 1
Submit an article Journal homepage
48
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

END MILLING SYSTEM COMPLIANCE AND MACHINING ERROR

S. Y. Liang George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia
&
L. Zheng department of Precision Instruments, Tsinghua University, Beijing, 100084, P. R. of China
Pages 41-56 | Received 21 Aug 1997, Accepted 03 Feb 1998, Published online: 23 Apr 2007

References

  • S. Smith and J. Tlusty , “ An Overview of Modeling and Simulation of the Milling Process ,” Journal of Engineering for Industry , 113 ( 1991 ) 169 – 175 .
  • T. S. Babin , J. M. Lee , J. W. Sutherland , and S. G. Kapoor , “A Model for End Milled Surface Topography,” Proc. of the 13th North American Metalworking Research Conference , (1985) 362–368.
  • G. M. Zhang , and S. G. Kapoor , “ Dynamic Generation of Machined Surface, Part 2: Construction of Surface Topography ,” Journal of Engineering for Industry , 113 ( 1991 ) 145 – 153 .
  • W. A. Kline , R. E. Devor , and I. A. Shareef , “ The Prediction of Surface Accuracy in End Milling ,” Journal of Engineering for Industry , 104 ( 1982 ) 272 – 278 .
  • J. W. Sutherland , and R. E. Devor , “ An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems ,” Journal of Engineering for Industry , 108 ( 1986 ) 269 – 279 .
  • F. Ismail , M. A. Elbestawi , R. Du , and K. Urbasik , “ Generation of Milled Surfaces Including Tool Dynamics and Wear ,” Journal of Engineering for Industry , 115 ( 1993 ) 245 – 252 .
  • M. A. Elbestawi , F. Ismail , R. Du , and B. C. Ullagaddi , “ Modeling Machining Dynamics Including Damping in the Tool-Workpiece Interface ,” Proc. of Symposium on Tribological Aspects in Manufacturing , ASME (PED-54/TRIB-2) ( 1991 ) 253 – 263 .
  • D. Montgomery and Y. Altintas , “ Mechanism of Cutting Force and Surface Generation in Dynamic Milling ,” Journal of Engineering for Industry , 113 ( 1991 ) 160 – 168 .
  • J.J. Wang , S. Y. Liang , and W. J. Book , “ Convolution Analysis of Milling Force Pulsation ,” Journal of Engineering for Industry , 116 ( 1994 ) 17 – 25 .
  • S. Y. Liang , J. J. Wang , and P. A. Herman , “ Surface Finish Enhancement in End Milling via Inverse Runout Trajectory Following ,” Transactions of North American Manufacturing Research Institution of SME , 21 ( 1993 ) 103 – 109 .
  • L. Kops , and D. T. Vo , “ Determination of the Equivalent Diameter of an End Mill Based on its Compliance ,” CIRP Annals, 39 ( 1 ) ( 1990 ) 93 – 96 .
  • J. W. Smith , Vibration of Structures , Chapman and Hall ( 1988 ).
  • S. A. Tobias , Machine Tool Vibration , John Wiley & Sons ( 1965 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.