FINITE ELEMENT MODELING OF MACHINING: FROM PROOF-OF-CONCEPT TO ENGINEERING APPLICATIONS

References

• K. F. Ehmann , S. G. Kapoor , R. E. DeVor , I. Lazoglu , “ Machining Process Modeling ,” J. Manuf. Sci. and Engrg. , 119 ( 1997 ) 655 – 663 .
   Web of Science ®Google Scholar
• G. Z. Chen and J. T. Black , “ FEM Modeling in Metal Cutting ,” Manuf. Rev. , 7 ( 2 ) ( 1994 ) 120 – 133 .
   Google Scholar
• H. Ernst and M. E. Merchant , “Chip Formation, Friction, and High Quality Machined Surfaces,” Trans. ASM , 29 (1941) 299.
   Google Scholar
• J. M. Hsu , “ Three-Dimensional Finite Element Modeling of Metal Cutting, ” Ph. D. Dissertation , North Carolina State University, Raleigh , North Carolina , ( 1990 ).
   Google Scholar
• J. S. Strenkowski and J.-C as . Lin , “ An Analytical Finite Element Model for Predicting Three-Dimensional Tool Forces and Chip Flow ,” Proc, ASME IMECE , 4 ( 1996 ) 273 – 280 .
   Google Scholar
• S. F. Wayne , C. Zimmerman , and D. A. Oneil , “ Aspects of Advanced Cutting Tool and Chip-Flow Modeling, ” Proc, 13 th Int. Plansee Seminar , H. Bildstein and R. Eck , eds., Mettalwerk Plansee, Reutte , 2 ( 1993 ) 603 – 615 .
   Google Scholar
• F. Mason , “ Better Tools the FEA Way ,” Manuf. Engrg. , 115 ( 1 ) ( 1995 ).
   Web of Science ®Google Scholar
• A. L. Shih , “ Finite Element Analysis of the Rake Angle Effects in Orthogonal Machining ,” Proc, ASME IMECE , 64 ( 1993 ) 475 – 483 .
   Google Scholar
• T. D. Marusich and M. Ortiz , “ Modelling and Simulation of High-Speed Machining ,” Int. J. Numer. Methods in Engrg. , 38 ( 1995 ) 3675 – 3694 .
   Web of Science ®Google Scholar
• Z. C. Lin and S. Y. Lin , “ A Coupled Finite Element Model of Thermo-Elastic-Plastic Large Deformation for Orthogonal Cutting ,” J. Engrg. Mat. and Technol , 114 ( 1992 ) 218 – 226 .
   Web of Science ®Google Scholar
• J. T. Caroll III and J. S. Strenkowski , “ Finite Element Models of Orthogonal Cutting with Application To Single Point Diamond Turning ,” Int. J. Mech. Sci , 30 ( 12 ) ( 1988 ) 899 – 920 .
   Web of Science ®Google Scholar
• T. Obikawa and E. Usui , “ Computational Machining of Titanium Alloy-Finite Element Modeling and a Few Results ,” J. Manuf. Sci. and Engrg. , 118 ( 1996 ) 208 – 215 .
   Web of Science ®Google Scholar
• K. Maekawa and T. Shirakashi , “ Recent Progress of Computer Aided Simulation of Chip Flow and Tool Damage in Metal Machining ,” J. Engrg. Manuf. , 120 (B 3 ) ( 1996 ) 233 – 242 .
   Google Scholar
• J. S. Strenkowski and S. M. Athavale , “ A Partially Constrained Eulerian Orthogonal Cutting Model for Chip Control Tools ,” J. Manuf. Sci. and Engrg. , 119 ( 1997 ) 681 – 688 .
   Web of Science ®Google Scholar
• B. Zhang and A. Bagchi , “ A study of Chip Separation and it's Approximation in Finite Element Simulation of Continuous Chip Formation ,” Proc, ASME IMEC, Material Issues in Machining and Physics of Machining Processes , 11 , D. A. Stephenson and R. Stevenson , eds., ( 1994 ) 157 .
   Google Scholar
• T. Obikawa , H. Sasahara , T. Shirakasi , and E. Usui , J. Manuf. Sci. and Engrg. , 119 ( 1997 ) 667 – 674 .
   Web of Science ®Google Scholar
• Z.-C Lin . and W.-C Pan ., “ A Thermo-Elastic-Plastic Model with Special Elements in a Cutting Process with Flank Tool Wear ,” Int. J. Machine Tools and Manuf , 34 ( 6 ) ( 1994 ) 757 – 770 .
   Web of Science ®Google Scholar
• J.-S Wu ., O.W Dillon Jr ,., and W.-Y v ., “ Thermo-Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method ,” J. Manuf. Sci. and Engrg. , 118 ( 4 ) ( 1996 ) 470 – 482 .
   Web of Science ®Google Scholar
• D. S. Malkus and T. J. R. Hughes , “ Mixed Finite Element Methods–Reduced and Selective Integration Techniques: A Unification of Concepts ,” Computer Methods in Appl. Mech. and Engrg. , 15 ( 1978 ) 63 .
   Web of Science ®Google Scholar
• J. A. Yang , “ A Predictive Model of Chip Breaking for Groove-Type Tools in Orthogonal Machining of AISI 1020 Steel, ” Ph. D. Dissertation , North Carolina State Univiersity, Raleigh , North Carolina ( 1992 ).
   Google Scholar
• A. Masud , “A Space-Time Finite Element Method for Fluid-Structure Interaction,” Ph. D. Dissertation , Stanford University, Stanford , California( 1993).
   Google Scholar
• R. Rakotomalala , P. Joyot , and M. Touratier , “ Arbitrary Lagrangian-Eulerian Thermomechanical Finite-Element Model of Material Cutting ,” Communications in Numer. Methods in Engrg. , 9 ( 1993 ) 975 – 987 .
   Google Scholar
• A. O. Tay , M. G. Stevenson , and G. de Vahl Davis, “ Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining ,” Proc, Inst. Mech. Engrs. , 188 ( 1974 ) 627 – 638 .
   Google Scholar
• J. S. Strenkowski and K.-J Moon ., “ Finite Element Prediction of Chip Geometry and Tool/Workpiece Temperature Distributions in Orthogonal Metal Cutting ,” J. Engrg. for Industry , 112 ( 1990 ) 313 – 318 .
   Web of Science ®Google Scholar
• S. M. Athavale , “ A Temperature Driven Diffusion Wear Model for Carbide and Ceramic Tools, ” M. S. Thesis , North Carolina State University, Raleigh , North Carolina ( 1990 ).
   Google Scholar
• J. A. Bailey and D. G. Bhanvadia , “ Correlation of Flow Stress with Strain Rate and Temperature During Machining ,” J. Engrg. Mat. and Technol , ( 1973 ) 94 – 98 .
   Google Scholar
• S. Agarwal , “ Design and Evaluation of A Dynamic Testing Machine, ” M. S. Thesis , North Carolina State University, Raleigh , North Carolina ( 1995 ).
   Google Scholar
• T. Shirakashi , K. Maekawa , and E. Usui , “ Flow Stress of Low Carbon Steel at High Temperature and Strain Rate-Propriety of Incremental Strain Method in Impact Compression Test with Rapid Heating and Cooling Systems ,” Bull. Japanese Soc. of Precision Engrg. , 17 ( 3 ) ( 1983 ) 161 – 172 .
   Web of Science ®Google Scholar
• N. N. Zorev , Metal Cutting Mechanics , Pergamon Press, Oxford ( 1966 ).
   Google Scholar
• E. Usui , T Shirakashi , and T Kitagawa , “ Analytical Prediction of Cutting Tool Wear ,” Wear , 100 ( 1984 ) 129 – 151 .
   Web of Science ®Google Scholar
• H. -C . Hsu, “ An Elasto-Vicoplastic Finite Element Model of Orthogonal Metal Cutting for Residual Stress Prediction, ” Ph. D. Dissertation , North Carolina State University, Raleigh , North Carolina ( 1992 ).
   Google Scholar
• J. S. Strenkowski and G. D. Hiatt , “ A Technique for Predicting the Ductile Regime in Single Point Diamond Turning of Brittle Materials ,” 67 – 80 .
   Google Scholar
• M. Hashimura , K. Ueda , D. Dornfeld , and K. Manabe , “ Analysis of Three-Dimensional Burr Formation in Oblique Cutting ,” Annals of CIRP , 44 ( 4 ) ( 1995 ) 27 – 30 .
   Google Scholar
• C. C. Hsieh (in preparation) , Ph. D. Dissertation , North Carolina State University, Raleigh , North Carolina .
   Google Scholar
• K. Maekawa , Y. Nakano , and T. Kitagawa , “ Finite Element Analysis of Thermal Behavior in Metal Machining ,” Int. J. Japanese Soc. Mech. Engrg., Series C: Dynamics, Control, Robotics, Design and Manufacturing , 39 ( 4 ) ( 1996 ) 864 – 870 .
   Google Scholar
• S. M. Athavale and J. S. Strenkowski , “ Material-Damage Based Model for Predicting Chip-Breakability ,” J. Manuf. Sci. and Engrg. , 119 ( 1997 ) 675 – 680 .
   Google Scholar
• N. P. Suh , “ Coated Carbides-Past, Present, and Future, Advances in Hard Material Tool Technology, ” Proc, Int. Conf. on Hard Material Tool Technol. , R. Komanduri , ed., Carnegie Press ( 1976 ).
   Google Scholar
• A. R. Lansdown and A. L. Price , Materials to Resist Wear , Pergamon Press, Tarry town,New York( 1986).
   Google Scholar
• J.-Y Lin . and H. S. Cheng , “ An Analytical Model for Dynamic Wear ,” J. Tribology , 111 ( 1980 ) 468 – 474 .
   Google Scholar
• S. C. Lim , S. H. Lee , Y. B. Liu , and K. H. W. Seah , “ Wear Maps for Uncoated High Speed Steel Cutting Tools ,” Wear , 170 ( 1 ) ( 1993 ) 137 – 144 .
   Web of Science ®Google Scholar
• T. N. Loladze , “ Wear of Cutting Tools, ” Izdatelstvo Mashgiz , Moscow ( 1958 ).
   Google Scholar
• T. N. Loladze , “ Of the Theory of Diffusion Wear ,” Annals of CIRP , 30 ( 1 ) ( 1981 ) 71 – 76 .
   Google Scholar
• Y. Nareheim and E. M. Trent , “ Diffusion Wear of Cemented Carbide Tools when Cutting Steel at High Speeds ,” Metals Technol , 4 ( 1977 ) 548 – 556 .
   Google Scholar
• B. M. Kramer , “ An Analytical Approach To Tool Wear Prediction, ” Ph. D. Dissertation , Massachusetts Institute of Technology, Cambridge , Massachusetts , ( 1979 ).
   Google Scholar
• B. M. Kramer and N. P , Suh, “ Tool Wear by Solution: A Quantitative Understanding ,” J. Engrg. for Industry , 102 ( 3 ) ( 1980 ) 303 – 309 .
   Web of Science ®Google Scholar
• P. D. Hartung and B. M. Kramer , “ Theoretical Considerations in Machining of Nickel-Based Alloys, ” Cutting Tool Materials , F. Gorsler , ed., ASM, ( 1981 ) 55 – 76 .
   Google Scholar
• P. D. Hartung and B. M. Kramer , “ Tool Wear in Titanium Machining ,” Annals of CIRP , 31 ( 1 ) ( 1982 ) 75 – 80 .
   Google Scholar
• R. Komanduri and J. Larsen-Basse , “ Tribology: The Cutting Edge ,” Mech, Engrg. , ( 1989 ) 74 – 79 .
   Google Scholar
• P. Karapantev , “ Investigation on Some Wear Parameters of CVD Layers on Carbides by Scanning Electron Microscope ,” Annals of CIRP , 27 ( 1 ) ( 1978 ) 79 – 85 .
   Google Scholar
• Y. Z. Y. Wu and B. Zhu , “ A study of the Rapid Testing for the Service Life of Cemented Carbide Cutting Tools, ” High Productivity Machining Materials and Process , V. K. Sarin , ed., ASM, 69 – 91 .
   Google Scholar
• N. Cook and P. Nayak , “ The Thermal Mechanics of Tool Wear ,” J. Engrg. for Industry , 88 ( 1 ) ( 1966 ) 66 – 93 .
   Google Scholar
• P. G. Shewmon , Diffusion in Solids , McGraw-Hill Inc., New York , New York, ( 1963 ).
   Google Scholar
• L. A. Girifalco and D. O. Welch , Point Defects and Diffusion in Strained Material , Gordon and Breach, Science Publishers, Inc., New York , New York, ( 1967 ).
   Google Scholar
• E. M. Trent , Metal Cutting , Butterworths, London , ( 1984 ) 134 .
   Google Scholar