2,106
Views
6
CrossRef citations to date
0
Altmetric
Technical Papers

On the forming mechanism of the cleaning airflow of pulse-jet fabric filters

, , , &
Pages 1273-1287 | Received 07 Dec 2016, Accepted 20 Mar 2017, Published online: 25 Sep 2017

References

  • Chen, C.J. 2001. Reducing pressure drop in a baghouse using flow distributors. J. Air Waste Manage. Assoc. 51(10):1471–5. doi: 10.1080/10473289.2001.10464364
  • Choudhary, A.K., and A. Mukhopadhyay. 2013. Particulates: Selection of cleaning pulse pressure for pulse jet fabric filtration. Filtration Separation 50(4):20–30. doi: 10.1016/S0015-1882(13)70166-6
  • Hemerka, O., P. Kosina, V. Adámek, and P. Hofmann. 2001. Contribution to improvement of pulse jet cleaning of industrial filters. J. Aerosol Sci. 32:847–80. doi: 10.1016/S0021-8502(01)00127-6
  • Humphries, W., and J. Madden. 1983. Fabric filtration for coal-fired boilers: Dust dislodgement in pulse jet filters. Filtration Separation 20(1):40–4.
  • Kanaoka, C., and T. Kishima. 1999. Observation of the process of dust accumulation on a rigid ceramic filter surface and the mechanism of cleaning dust from the filter surface. Adv. Powder Technol. 10(4):417–26. doi: 10.1163/156855299X00253
  • Kurose, R., H. Makino, M. Hata, and C. Kanaoka. 2003. Numerical analysis of a flow passing through a ceramic candle filter on pulse jet cleaning. Adv. Powder Technol. 14(6):735–48. doi: 10.1163/15685520360732016
  • Leubner, H., and U. Riebel. 2004. Pulse jet cleaning of textile and rigid filter media—Characteristic parameters. Chem. Eng. Technol. 27(6):652–61. doi: 10.1002/(ISSN)1521-4125
  • Lo, L.-M., S.-C. Hu, D.-R. Chen, and D.Y.H. Pui. 2010. Numerical study of pleated fabric cartridges during pulse-jet cleaning. Powder Technol. 198:75–81. doi: 10.1016/j.powtec.2009.10.017
  • Lu, H.-C., and C.-J. Tsai. 1999. Influence of design and operation parameters on bag-cleaning performance of pulse-jet baghouse. J. Environ. Eng. 125(6):583–91. doi: 10.1061/(ASCE)0733-9372(1999)125:6(583)
  • Pham, M., C. Clark, and J. Mckenna. 2012. The evolution and impact of testing baghouse filter performance. J. Air Waste Manage. Assoc. 62(8):916–23. doi: 10.1080/10962247.2012.687360
  • Piekaar, H. W., and L.A. Clarenburg. 1967. Aerosol filters—The tortuosity factors in fibrous filters. Chem. Eng. Sci. 22(12):1817–27. doi: 10.1016/0009-2509(67)80212-4
  • Saleem, M., R.U. Khan, M.S. Tahir, and G. Krammer. 2011. Experimental study of cake formation on heat treated and membrane coated needle felts in a pilot scale pulse jet bag filter using optical in-situ cake height measurement. Powder Technol. 214(3):388–99. doi: 10.1016/j.powtec.2011.08.037
  • Schiller, S., and H.-J. Schmid. 2015. Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials. Powder Technol. 279:96–105. doi: 10.1016/j.powtec.2015.03.048
  • Schildermans, I., J. Baeyens,and K. Smolders. 2004. Pulse jet cleaning of rigid filters: A literature review and introduction to process modelling. Filtration Separation 41(5):26–33. doi: 10.1016/S0015-1882(04)00234-4
  • Sievert, J., and F. Löffler. 1989. Fabric cleaning in pulse-jet filters. Chem. Eng. Process. 26(2):179–83. doi: 10.1016/0255-2701(89)90010-X
  • Tsai, C.-J.,and H.-C. Lu. 1998. Design and operation of a pilot-scale pulse-jet baghouse. J. Aerosol Sci. 29:S1079–80. doi: 10.1016/S0021-8502(98)90722-4
  • Wilanowicz, J., W. Grabowski, M. Andrzejczak, and A. Chromiec. 2013. Assessment of the suitability of baghouse dusts from a dust extractor as fillers for hot-mix asphalt. Proc. Eng. 57:1269–77. doi: 10.1016/j.proeng.2013.04.160
  • Yan, C., G, Liu, and H. Chen. 2013. Effect of induced airflow on the surface static pressure of pleated fabric filter cartridges during pulse jet cleaning. Powder Technol. 249:424–30. doi: 10.1016/j.powtec.2013.09.017
  • Yang, Z. 2000. The effects on baghouse filter bags during the incineration of high-fluoride sites. Powder Technol. 108(2–3):160–3. doi: 10.1016/S0032-5910(99)00215-6

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.