References
- Ahmed, W. H., M. M. Bello, M. El Nakla, and A. Al Sarkhi. 2012. Flow and mass transfer downstream of an orifice under flow accelerated corrosion conditions. Nucl. Eng. Des. 252:52–67. doi:https://doi.org/10.1016/j.nucengdes.2012.06.033.
- Albright, L. 2008. Albright’s chemical engineering handbook. Boca Raton, FL: CRC Press.
- Ali, M., H. Pasic, K. Alam, S. A. N. Tiji, N. Mannella, T. Silva, and T. Liu. 2016. Experimental study of cross-flow wet electrostatic precipitator. J. Air Waste Manage. 66 (12):1237–44. doi:https://doi.org/10.1080/10962247.2016.1209258.
- Aly, A. A. E. A., A. Chong, F. C. G. A. Nicolleau, and S. Beck. 2010. Experimental study of the pressure drop after fractal-shaped orifices in turbulent pipe flows. Exp. Therm. Fluid Sci. 34 (1):104–11. doi:https://doi.org/10.1016/j.expthermflusci.2009.09.008.
- Barratt, D., and T. Kim. 2015. A banked wide-angle diffuser with application to electrostatic precipitators. P. I. Mech. Eng. A-J. Pow 229 (1):88–98. doi:https://doi.org/10.1177/0957650914553458.
- Bayazit, Y., E. M. Sparrow, and D. D. Joseph. 2014. Perforated plates for fluid management: Plate geometry effects and flow regimes. Int. J. Therm. Sci. 85:104–11. doi:https://doi.org/10.1016/j.ijthermalsci.2014.06.002.
- Bhasker, C. 2011. Flow simulation in electro-static-precipitator (ESP) ducts with turning vanes. Adv, Eng. Softw. 42 (7):501–12. doi:https://doi.org/10.1016/j.advengsoft.2011.04.002.
- Cengel, Y. A. 2010. Fluid mechanics. New York: Tata McGraw-Hill Education.
- Coghe, A., M. Mantegna, and G. Sotgia. 2003. Fluid dynamics aspects of electrostatic precipitators: Turbulence characteristics in scale models. J. Fluids Eng. 125 (4):694–700. doi:https://doi.org/10.1115/1.1593704.
- Dmitriev, S. S., I. M. Borsch, M. O. Plodistiy, A. A. Gusev, and N. A. Larin. 2016. Research of influence of the installation of perforated plates on the flow in the diffuser ducts with turning of the flow at 90°. Therm. Eng+. 63 (1):28–34. doi:https://doi.org/10.1134/S0040601516010031.
- Fadilah, P. A., and D. F. Erawan. 2018. Effect of applying screen and honeycomb to the flow characteristics in wind tunnel based on CFD simulation. J. Phys. Conf. Ser. 1130 (1):012008. doi:https://doi.org/10.1088/1742-6596/1130/1/012008.
- Guo, B. Y., Q. F. Hou, A. B. Yu, L. F. Li, and J. Guo. 2013. Numerical modelling of the gas flow through perforated plates. Chem. Eng. Res. Des. 91 (3):403–08. doi:https://doi.org/10.1016/j.cherd.2012.10.004.
- Haque, S. M. E., M. G. Rasul, A. V. Deev, M. M. K. Khan, and N. Subaschandar. 2009a. Flow simulation in an electrostatic precipitator of a thermal power plant. Appl. Therm. Eng. 29 (10):2037–42. doi:https://doi.org/10.1016/j.applthermaleng.2008.10.019.
- Haque, S. M. E., M. G. Rasul, M. M. K. Khan, A. V. Deev, and N. Subaschandar. 2007. Flow distribution inside an electrostatic precipitator: Effects of uniform and variable porosity of perforated plate. Proceedings of the 5th IASME/WSEAS International Conference on Heat Transfer, Athens, August 25-27.
- Haque, S. M. E., M. G. Rasul, M. M. K. Khan, A. V. Deev, and N. Subaschandar. 2009b. Influence of the inlet velocity profiles on the prediction of velocity distribution inside an electrostatic precipitator. Exp. Therm. Fluid Sci. 33 (2):322–28. doi:https://doi.org/10.1016/j.expthermflusci.2008.09.010.
- Hein, A. G. 1989. Dust reentrainment, gas distribution and electrostatic precipitator performance. JAPCA J. Air Waste Ma. 39 (5):766–71. doi:https://doi.org/10.1080/08940630.1989.10466562.
- Jędrusik, M., A. Świerczok, and D. Łuszkiewicz. 2017. Physical and numerical modelling of gas flow in electrostatic precipitator. Przeglad Elektrotechniczny 93. doi:https://doi.org/10.15199/48.2017.02.50.
- Karthikeyan, P., A. Kumar, A. Aakash, A. A. Meshak, and V. Vimalprakash. 2019. Experimental and computational investigations of flow through diffuser with perforated plates. Int. J. Engg. Res. Technol. 7 (11):1–5.
- Lipták, B. 2003. Instrument engineers’ handbook, Vol. 1. Process Measurement and Analysis. Boca Raton, FL: CRC Press.
- Malavasi, S., G. Messa, U. Fratino, and A. Pagano. 2012. On the pressure losses through perforated plates. Flow Meas. Instrum. 28:57–66. doi:https://doi.org/10.1016/j.flowmeasinst.2012.07.006.
- Manshoor, B., I. Zaman, and A. Khalid. 2013. Experimental study of pressure drop after the circle grids fractal orifice. Appl. Mech. Mater. 390:111–15. doi:https://doi.org/10.4028/www.scientific.net/AWM.390.111.
- Meng, X., Z. Zuo, M. Nishi, and S. Liu. 2020. A numerical study on the flow mechanism of performance improvement of a wide-angle diffuser by inserting a short splitter vane. Processes 8 (2):143. doi:https://doi.org/10.3390/pr8020143.
- Menon, S. 2004. Piping calculations manual. New York: McGraw Hill Professional.
- Miller, R. W. 1983. Flow measurement engineering handbook. New York: McGraw-Hill.
- Noui-Mehidi, M. N., J. Wu, I. D. Utalo, and C. Grainger. 2005. Velocity distribution downstream of an asymmetric wide-angle diffuser. Exp. Therm. Fluid Sci 29 (6):649–57. doi:https://doi.org/10.1016/j.expthermflusci.2004.10.002.
- Randolph, S. W. 1953. A study of gas distribution in electrostatic precipitators. Air Repair, 3 (2):70–78. doi:https://doi.org/10.1080/00966665.1953.10467605
- Robinson, M. 1968. Turbulent gas flow and electrostatic precipitation. JAPCA J. Air Waste Ma. 18 (4):235–39. doi:https://doi.org/10.1080/00022470.1968.10469120.
- Sagar, D., A. R. Paul, and A. Jain. 2011. Computational fluid dynamics investigation of turbulent separated flows in axisymmetric diffusers. Int. J. Environ. Sci. Technol. 3 (2): 104–109.
- Sahin, B., and A. J. Ward-Smith. 1987. The use of perforated plates to control the flow emerging from a wide-angle diffuser, with application to electrostatic precipitator design. Int. J. Heat Fluid Fl. 8 (2):124–31. doi:https://doi.org/10.1016/0142-727X(87)90011-7.
- Sahin, B., and A. J. Ward-Smith. 1990. Effect of perforated plates on wide-angle diffuser-exit velocity profiles. J. Wind Eng. Ind. Aerod. 34 (2):113–25. doi:https://doi.org/10.1016/0167-6105(90)90139-4.
- Sahin, B., and A. J. Ward-Smith. 1993. The pressure distribution in and flow characteristics of wide-angle diffusers using perforated plates for flow control with application to electrostatic precipitators. Int. J. Mech. Sci. 35 (2):117–27. doi:https://doi.org/10.1016/0030-7403(93)90070-B.
- Sahin, B., A. J. Ward-Smith, and D. Lane. 1995. The pressure drop and flow characteristics of wide-angle screened diffusers of large area ratio. J. Wind Eng. Ind. Aerod. 58:33–50. doi:https://doi.org/10.1016/0167-6105(95)00018-M.
- Seltsam, M. M. 1995. Experimental and theoretical study of wide-angle diffuser flow with screens. Aiaa J. 33 (11):2092–100. doi:https://doi.org/10.2514/3.12952.
- Shin, W. H., W. S. Hong, and D. K. Song. 2010. Relationship between ICAC EP-7 and% RMS, standards for gas flow uniformity inside electrostatic precipitators. J. Korean Soc. Atmos. Environ. 26 (2):234–40. doi:https://doi.org/10.5572/KOSAE.2010.26.2.234.
- Su, L., Q. Du, Y. Wang, H. Dong, J. Gao, M. Wang, and P. Dong. 2018. Purification characteristics of fine particulate matter treated by a self-flushing wet electrostatic precipitator equipped with a flexible electrode. J. Air. Waste Manage. 68 (7):725–36. doi:https://doi.org/10.1080/10962247.2018.1460635.
- Swaminathan, M. R., and N. V. Mahalakshmi. 2010. Numerical modelling of flow through perforated plates applied to electrostatic precipitator. J. Applied Sci. 10 (20):2426–32. doi:https://doi.org/10.3923/jas.2010.2426.2432.
- Uehleke, H., and T. Werner. 1975. Flow of fluids through valves, fittings, and pipe (TP-410 (US edition)). Arch. Toxicol. 34:289–308. doi:https://doi.org/10.1007/BF00353849.
- Ullum, T., and P. S. Larsen. 2005. Swirling Flow Structures in Electrostatic Precipitator. Flow Turbul. Combust. 73 (3–4):25–275. doi:https://doi.org/10.1007/s10494-005-6772-9.
- Ward-Smith, A. J., D. L. Lane, A. J. Reynolds, B. Sahin, and D. J. Shawe. 1991. Flow regimes in wide-angle screened diffusers. Int. J. Mech. Sci. 33 (1):41–54. doi:https://doi.org/10.1016/0020-7403(91)90026-Y.
- Yang, Z., C. Zheng, Q. Chang, Y. Wan, Y. Wan, Y. Wang, X. Gao, and K. Cen. 2017. Fine particle migration and collection in a wet electrostatic precipitator. J. Air Waste Manage. 67 (4):498–506. doi:https://doi.org/10.1080/10962247.2016.1260074.