References
- Arab, E., Ghaemi, A., & Torab-Mostaedi, M. (2017). Experimental investigation of slip velocity and dispersed phase holdup in a Kühni extraction column. Asia-Pacific Journal of Chemical Engineering, 12(4), 620–630. https://doi.org/10.1002/apj.2103
- Asadollahzadeh, M., Haghighi-Asl, A., Safdari, J., & Torab-Mostaedi, M. (2011). Flooding characteristics in pulsed packed extraction columns. Brazilian Journal of Chemical Engineering, 28(4), 639–648. https://doi.org/10.1590/S0104-66322011000400009
- Asadollahzadeh, M., Hemmati, A., Torab-Mostaedi, M., Shirvani, M., Ghaemi, A., & Mohsenzadeh, Z. (2016a). Use of axial dispersion model for determination of Sherwood number and mass transfer coefficients in a perforated rotating disc contactor. Chinese Journal of Chemical Engineering, 25(1), 53–61. https://doi.org/10.1016/j.cjche.2016.06.007
- Asadollahzadeh, M., Sh., S., Torab-Mostaedi, M., & Ghaemi, A. (2015). Mass transfer performance in an Oldshue–Rushton column extractor. Chemical Engineering Research & Design, 100, 104–112. https://doi.org/10.1016/j.cherd.2015.04.027
- Asadollahzadeh, M., Sh., S., Torab-Mostaedi, M., & Ghaemi, A. (2016b). Drop behavior in a pilot plant oldshue-rushton extraction column for three various liquid-liquid systems. Separation and Purification Technology, 159, 7–17. https://doi.org/10.1016/j.seppur.2015.12.050
- Asadollahzadeh, M., Torab-Mostaedi, M., Sh., S., & Ghaemi, A. (2016c). Experimental investigation of dispersed phase holdup and flooding characteristics in a multistage column extractor. Chemical Engineering Research & Design, 105, 177–187. https://doi.org/10.1016/j.cherd.2015.11.019
- Asadollahzadeh, M., Torab-Mostaedi, M., Sh., S., Ghaemi, A., & Torkaman, R. (2016d). Unified new correlation for prediction of dispersed phase holdup in agitated extraction columns. Separation and Purification Technology, 158, 275–285. https://doi.org/10.1016/j.seppur.2015.12.030
- Asadollahzadeh, M., Torab-Mostaedi, M., & Torkaman, R. (2016e). Holdup and flooding measurements in an asymmetric rotating disc column. Chemical Engineering Processing, 109, 97–103. https://doi.org/10.1016/j.cep.2016.08.018
- Asadollahzadeh, M., Torab-Mostaedi, M., & Torkaman, R. (2017a). New correlations for slip velocity and characteristic velocity in a rotary liquid-liquid extraction column. Chemical Engineering Research & Design, 127, 146–153. https://doi.org/10.1016/j.cherd.2017.07.032
- Asadollahzadeh, M., Torkaman, R., & Torab-Mostaedi, M. (2020a). Continuous extraction of europium(iii) by ionic liquid in the rotating disk column with an asymmetrical structure aimed at the evaluation of reactive mass transfer. ACS Omega, 5(30), 18700–18709. https://doi.org/10.1021/acsomega.0c01636
- Asadollahzadeh, M., Torkaman, R., & Torab-Mostaedi, M. (2020b). Optimization of lanthanum extraction in asymmetric rotation pilot plant column by using central composite methodology. Geosystem Engineering, 23(2), 101–111. https://doi.org/10.1080/12269328.2020.1719905
- Asadollahzadeh, M., Torkaman, R., & Torab-Mostaedi, M. (2020c). Coupling minimum cross-entropy model with experimental data to determine the drop size distribution for lanthanum extraction in ARDC column. Separation and Purification Technology. Article in Press, https://doi.org/10.1080/01496395.2020.1754429
- Asadollahzadeh, M., Torkaman, R., Torab-Mostaedi, M., & Moazami, F. (2020d). Estimation of performance with the two truncated probability density functions, case study: using mixco column to extract samarium and gadolinium. Separation Science and Technology, 1–12. Article in Press, https://doi.org/10.1080/01496395.2020.1757713
- Asadollahzadeh, M., Torkaman, R., Torab-Mostaedi, M., & Safdari, J. (2017b). Using maximum entropy, gamma, inverse gaussian and weibull approach for prediction of drop size distribution in a liquid–liquid extraction column. Chemical Engineering Research & Design, 117, 637–647. https://doi.org/10.1016/j.cherd.2016.08.025
- Asadollahzadeh, M., Torkaman, R., Torab-Mostaedi, M., & Safdari, J. (2017c). A comparison between drop size distributions derived from the probability distribution functions and maximum entropy principle. Case study; pilot plant Scheibel extraction column. Chemical Engineering Research & Design, 117, 648–658. https://doi.org/10.1016/j.cherd.2016.08.034
- Azizitorghabeh, A., Rashchi, F., & Babakhani, A. (2106). Stoichiometry and structural studies of Fe(III) and Zn(II) solvent extraction using D2EHPA/TBP. Separation and Purification Technology, 171, 197–205. https://doi.org/10.1016/j.seppur.2016.07.037
- Bart, H. J. (2001). Reactive extraction. Springer.
- Bharagava, R. N., & Chowdhary, P. (2018). Emerging and eco-friendly approaches for waste management (pp. 397–421). Springer.
- Biswas, R. K., Habib, M. A., Karmakar, A. K., & Tanzin, S. (2016). Recovery of manganese and zinc from waste Zn–C cell powder: Mutual separation of Mn(II) and Zn(II) from leach liquor by solvent extraction technique. Waste Management, 51, 149–156. https://doi.org/10.1016/j.wasman.2015.09.041
- Chang, J., Zhang, L., Dud, Y., Peng, J. H., Hu, G., Chen, J., & Srinivasakannan, C. (2016). Separation of indium from iron in a rotating packed bed contactor using Di-2-ethylhexylphosphoric acid. Separation and Purification Technology, 164, 12–18. https://doi.org/10.1016/j.seppur.2016.03.017
- Cheng, C. Y., Barnard, K. R., Zhang, W., Zhu, Z., & Pranolo, Y. (2016). Recovery of nickel, cobalt, copper and zinc in sulphate and chloride solutions using synergistic solvent extraction. Chinese Journal of Chemical Engineering, 24(2), 237–247. https://doi.org/10.1016/j.cjche.2015.06.002
- Dana, M., Sh., S., Sobati, M. A., Ansari, A. R., & Asadollahzadeh, M. (2020). Optimization of extractive desulfurization of diesel oil in a continuous oldshue–rushton column pilot plant. Energy & Fuels, 34(1), 1041–1052. https://doi.org/10.1021/acs.energyfuels.9b02793
- Daryabor, M., Ahmadi, A., & Zilouei, H. (2017). Solvent extraction of cadmium and zinc from sulphate solutions: Comparison of mechanical agitation and ultrasonic irradiation. Ultrasonic Sonochemistry, 34, 931–937. https://doi.org/10.1016/j.ultsonch.2016.07.014
- El-Nadi, Y. A. (2017). Solvent extraction and its applications on ore processing and recovery of metals: classical approac. Separation Purification Review, 46(3), 195–215. https://doi.org/10.1080/15422119.2016.1240085
- Fischer, A. (1973). Hydrodynamik und Stoffaustausch in einerFlussig- Flussig-Ruhrextraktionskolonne. ETH Zurich.
- Hemmati, A., Torab-Mostaedi, M., & Asadollahzadeh, A. (2015). Mass transfer coefficients in a Kühni extraction column. Chemical Engineering Research & Design, 93, 747–754. https://doi.org/10.1016/j.cherd.2014.07.011
- Horvoth, M., & Hartland, S. (1985). Mixer-settler extraction column: Mass transfer efficiency and entraiment. Industrial & Engineering Chemistry Process Design and Development, 24(4), 1220–1225. https://doi.org/10.1021/i200031a054
- Kasaie, M., Bahmanyar, H., & Moosavian, M. A. (2016). Investigation of copper extraction from aqueous sulfate solution in a rotating disc contactor. Brazilian Journal of Chemical Engineering, 27(5), 866–876. https://doi.org/10.5935/0103-5053.20150339
- Kumar, A., & Hartland, S. (1989). Independent Prediction of slip velocity and holdup in liquid–liquid extraction columns. Canadian Journal of Chemical Engineering, 67(1), 17–25. https://doi.org/10.1002/cjce.5450670104
- Mahandra, H., Singh, R., & Gupta, B. (2017). Liquid-liquid extraction studies on Zn(II) and Cd(II) using phosphonium ionic liquid (cyphos IL 104) and recovery of zinc from zinc plating mud. Separation Purification Technology, 177, 281–292. https://doi.org/10.1016/j.seppur.2016.12.035
- Mansur, M. B., Slater, M. J., & Junior, E. C. B. (2003). Reactive extraction of zinc sulfate with bis(2-ethylhexyl)phosphoric acid in a short kuhni column used in batch mode. Industrial & Engineering Chemistry Research, 42(17), 4068–4076. https://doi.org/10.1021/ie020883y
- McNabb, D. E. (2019). Global pathways to water sustainability. Springer.
- Nawab, J., Khan, S., Ali, S., Sher, H., Rahman, Z., Khan, K., Tang, J., & Ahmad, A. (2016). Health risk assessment of heavy metals and bacterial contamination in drinking water sources: A case study of malakand agency, Pakistan. Environmental Monitoring and Assessment, 188(5), 286. https://doi.org/10.1007/s10661-016-5296-1
- Oliveira, N. S., Silva, D. M., Gondim, M. P. C., & Mansur, M. B. (2008). A study of the drop size distributions and holdup in short kühni columns. Brazilian Journal of Chemical Engineering, 25(4), 729–740. https://doi.org/10.1590/S0104-66322008000400010
- Shah, K., Gupta, K., & Sengupta, B. (2017). Selective separation of copper and zinc from spent chloride brass pickle liquors using solvent extraction and metal recovery by precipitation-stripping. Journal of Environmental Chemical Engineering, 5(5), 5260–5269. https://doi.org/10.1016/j.jece.2017.09.061
- Shakib, B., Torab-Mostaedi, M., Outokesh, M., & Asadollahzadeh, M. (2020a). Mass transfer evaluation in a multi-impeller extractor for reactive Mo (VI) extraction from aqueous Sulphate solution by utilizing coupling of acid and solvating Extractants. Heat and Mass Transfer, 56(6), 1995–2006. https://doi.org/10.1007/s00231-020-02828-7
- Shakib, B., Torab-Mostaedi, M., Outokesh, M., & Asadollahzadeh, M. (2020b). Direct extraction of Mo(VI) from sulfate solution by synergistic extractants in the rotation column. Chinese Journal of Chemical Engineering, 28(2), 445–455. https://doi.org/10.1016/j.cjche.2019.11.011
- Shakib, B., Torkaman, R., Torab-Mostaedi, M., & Asadollahzadeh, M. (2020c). The Performance of Pulsed Scale-up Column for Permeable of Selenium and Tellurium Ions to Organic Phase, Case Study: Disc and Doughnut Structure. Chemical Engineering and Processing, 157, 108042. Article in Press, https://doi.org/10.1016/j.cep.2020.108042,108042.
- Shakib, B., Torkaman, R., Torab-Mostaedi, M., & Asadollahzadeh, M. (2020d). Exact hydrodynamic description of pilot plant Oldshue-Rushton contactor: A case study with the introduction of selenium and tellurium into reaction system. International Journal of Environmental Analytical Chemistry, 1–17. Article in Press, https://doi.org/10.1080/03067319.2020.1781103
- Shirvani, R., Ghaemi, A., & Torab-Mostaedi, M. (2016). Experimental investigation of flooding and drop size in a kuhni extraction column. International Journal of Engineering TRANSACTIONS C: Aspects, 29(3), 288–296. https://doi.org/10.5829/idosi.ije.2016.29.03c.02
- Tang, J., Petranikova, M., Ekberg, C., & Steenari, B. M. (2017). Mixer-settler system for the recovery of copper and zinc from MSWI fly ash leachates: An evaluation of a hydrometallurgical process. Journal of Cleaner Production, 148, 598–605. https://doi.org/10.1016/j.jclepro.2017.02.015
- Torab-Mostaedi, M., Ghaemi, A., & Asadollahzadeh, M. (2011a). Flooding and drop size in a pulsed disc and doughnut extraction column. Chemical Engineering Research & Design, 89(12), 2742–2751. https://doi.org/10.1016/j.cherd.2011.06.006
- Torab-Mostaedi, M., Ghaemi, A., Asadollahzadeh, M., & Pejmanzad, P. (2011b). Mass Transfer Performance In Pulsed Disc And Doughnut Extraction Columns. Brazilian Journal of Chemical Engineering, 28(3), 447–456. https://doi.org/10.1590/S0104-66322011000300010
- Torab-Mostaedi, M., Safdari, J., & Asadollahzadeh, M. (2012). Mean drop size and drop size distribution in a hanson mixer-settler extraction column. Iranian Journal of Chemical Engineering, 9(2), 54–65.
- Torkaman, R., Asadollahzadeh, M., & Torab-Mostaedi, M. (2017a). Effects of nanoparticles on the drop behavior in the oldshue-rushton extraction column by using central composite design method. Separation and Purification Technology, 197, 302–313. https://doi.org/10.1016/j.seppur.2017.12.035
- Torkaman, R., Asadollahzadeh, M., & Torab-Mostaedi, M. (2017b). Determination of slip and characteristic velocities in reactive extraction with experiments in the Oldshue-Rushton column and presence of samarium and gadolinium metals. Chemical Engineering and Processing, 111, 7–13. https://doi.org/10.1016/j.cep.2016.10.018
- Torkaman, R., Asadollahzadeh, M., Torab-Mostaedi, M., & Ghannadi-Maragheh, M. (2017c). Reactive extraction of cobalt sulfate solution with D2EHPA/TBP extractants in the pilot plant Oldshue–Rushton column. Chemical Engineering Research & Design, 120, 58–68. https://doi.org/10.1016/j.cherd.2017.02.004
- Torkaman, R., Safdari, J., Torab-Mostaedi, M., Moosavian, M. A., & Asadollahzadeh, M. (2015). Extraction of samarium and gadolinium from aqueous nitrate solution with D2EHPA in a pulsed disc and doughnut column. Journal of the Taiwan Institute of Chemical Engineers, 48, 18–25. https://doi.org/10.1016/j.jtice.2014.10.016
- Wejman-Gibas, K., Pilsniak-Rabiega, M., & Ochromowicz, K. (2017). Solvent extraction of zinc(II) from ammonia leaching solution by LIX 54-100, LIX 84 i and TOA. Physicochemical Problems of Mineral Processing, 53(1), 202–211. https://doi.org/10.5277/ppmp170117
- Zhang, T., Ruan, J., Zhang, B., Lu, S., Gao, C., Huang, L., Bai, X., Xie, L., Gui, M., & Qiu, R. (2019). Heavy metals in human urine, foods and drinking water from an e-waste dismantling area: Identification of exposure sources and metal-induced health risk. Ecotoxicology Environmental Safety, 169, 707–717. https://doi.org/10.1016/j.ecoenv.2018.10.039