Improving seismic performance of structural systems via reinforcing column bases

References

• AISC. 2016a. Seismic Provisions for Structural Steel Buildings. Illinois: American institute of steel construction.
   Google Scholar
• AISC. 2016b. Specification for Structural Steel Buildings. Chicago, Illinois: American Institute of Steel Construction.
   Google Scholar
• Al Kajbaf, A., N. Fanaie, and K. F. Najarkolaie. 2018. “Numerical Simulation of Failure in Steel Posttensioned Connections Under Cyclic Loading.” Engineering Failure Analysis 91:35–57. https://doi.org/10.1016/j.engfailanal.2018.04.024.
   Web of Science ®Google Scholar
• ATC (Applied Technology Council). 1992. Guidelines for Cyclic Seismic Testing of Components of Steel Structures.
   Google Scholar
• Bao, Y., and T. Wierzbicki. 2004. “On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space.” International Journal of Mechanical Sciences 46 (1): 81–98. https://doi.org/10.1016/j.ijmecsci.2004.02.006.
   Web of Science ®Google Scholar
• Ebrahimi, S., 2019. Numerical and Experimental Investigation on Load Transfer Mechanism at Brace Connection of Frames with Hollow Structural Section (HSS) and Concrete-Filled. Tube (CFT) Columns. Doctoral dissertation, University of Tehran.
   Google Scholar
• Ebrahimi, S., and S. R. Mirghaderi. 2021a. “Designing Gusset Plates of Chevron‐SCBFs Through a New Method.” The Structural Design of Tall & Special Buildings 30 (5): e1835. https://doi.org/10.1002/tal.1835.
   Web of Science ®Google Scholar
• Ebrahimi, S., and S. R. Mirghaderi. 2021b. “A Seismic Design Method for One-Piece Gusset Plate Connections.” Journal of Building Engineering 44:102729. https://doi.org/10.1016/j.jobe.2021.102729.
   Web of Science ®Google Scholar
• Ebrahimi, S., and S. R. Mirghaderi. 2023. “A New Friction–Slip Brace Damper to Improve Seismic Performance of Braced Frames.” Journal of Constructional Steel Research 207:107945. https://doi.org/10.1016/j.jcsr.2023.107945.
   Web of Science ®Google Scholar
• Ebrahimi, S., S. R. Mirghaderi, and S. M. Zahrai. 2019. “Proposed Design Procedure for Gusset Plate Dimensions and Force Distribution at Its Interfaces to Beam and Column.” Engineering Structures 178:554–572. https://doi.org/10.1016/j.engstruct.2018.09.066.
   Web of Science ®Google Scholar
• Ebrahimi, S., S. R. Mirghaderi, and S. M. Zahrai. 2021. “Full-Scale Tests on Two-Story SCBFs with Through–Gusset Plate in Brace-To-CFT Column Connections.” Journal of Constructional Steel Research 187:106946. https://doi.org/10.1016/j.jcsr.2021.106946.
   Web of Science ®Google Scholar
• Ebrahimi, S., S. R. Mirghaderi, and S. M. Zahrai. 2022. “Cyclic Behavior of SCBFs with Through-Gusset Plate Connections and Concrete-Filled Tube Columns.” Journal of Earthquake Engineering 26 (8): 3885–3913. https://doi.org/10.1080/13632469.2020.1822222.
   Web of Science ®Google Scholar
• Ebrahimi, S., S. R. Mirghaderi, and S. M. Zahrai. 2023. “Experimental Evaluation of Composite and Non‐Composite Columns and Braces in Special Concentrically Braced Frames.” The Structural Design of Tall & Special Buildings 32 (7): e2002. https://doi.org/10.1002/tal.2002.
   Web of Science ®Google Scholar
• Ebrahimi, S., S. R. Mirghaderi, S. M. Zahrai, A. Najafi, and S. M. S. Otaghsaraie. 2021. “Experimental Study on Brace to HSS Column Connection Using Through-Gusset Plate.” Engineering Structures 234:111948. https://doi.org/10.1016/j.engstruct.2021.111948.
   Web of Science ®Google Scholar
• Ebrahimi, S., S. M. Zahrai, and S. R. Mirghaderi. 2019. “Numerical Study on Force Transfer Mechanism in Through Gusset Plates of SCBFs with HSS Columns & Beams.” Steel and Composite Structures 31 (6): 541–558.
   Web of Science ®Google Scholar
• Hines, E. M., M. E. Appel, and P. J. Cheever. 2009. “Collapse Performance of Low-Ductility Chevron Braced Steel Frames in Moderate Seismic Regions.” Engineering Journal 46 (3): 149–180.
   Google Scholar
• Hose, Y. D., F. Seible, and M. J. N. Priestley. 1997. Strategic Relocation of Plastic Hinges in Bridge Columns, Rep. SSRP-97/05, Structural Systems Research Project, Dept. of Structural Engineering, Univ. of California, San Diego, La Jolla, CA.
   Google Scholar
• Lai, J. W., and S. A. Mahin. 2013. “Experimental and Analytical Studies on the Seismic Behavior of Conventional and Hybrid Braced Frames.” PEER Report 2013/20. Berkeley: University of California.
   Google Scholar
• Lee, Y. W., and T. Wierzbicki. 2004. “Quick Fracture Calibration for Industrial Use.” Massachusetts Institute of Technology, Impact & Crashworthiness Laboratory Report, (115).
   Google Scholar
• Li, P., K. Rong, Z. Lu, and Z. Feng. 2020. “Experimental and Numerical Study on the Performance of Novel RC Frame Structure Encased with Shaped Steel Under Debris Flow Impact.” Engineering Structures 212:110472. https://doi.org/10.1016/j.engstruct.2020.110472.
   Web of Science ®Google Scholar
• Lu, Z., K. Rong, Z. Zhou, and J. Du. 2020. “Experimental Study on Performance of Frame Structure Strengthened with Foamed Aluminum Under Debris Flow Impact.” Journal of Performance of Constructed Facilities 34 (2): 04020011. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001403.
   Web of Science ®Google Scholar
• Midorikawa, M., T. Hasegawa, A. Mukai, I. Nishiyama, T. Fukuta, and H. Yamanouchi. 1997. “Damage Investigation of Steel Buildings in Specific Areas Observed from the 1995 Hyogoken-Nanbu Earthquake.” In: Proceedings of US–Japan workshop on steel fracture issues.
   Google Scholar
• Northridge Reconnaissance Team. 1996. Northridge Earthquake of January 17, 1994. Reconnaissance report. (Suppl. C-2 to Vol. 11). Oakland (CA): EERI.
   Google Scholar
• Rutledge, S. T., M. J. Kowalsky, R. Seracino, and J. M. Nau. 2014. “Repair of Reinforced Concrete Bridge Columns Containing Buckled and Fractured Reinforcement by Plastic Hinge Relocation.” Journal of Bridge Engineering 19 (8): A4013001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000492.
   Web of Science ®Google Scholar
• Simpson, B. G., and S. A. Mahin. 2018. “Experimental and Numerical Evaluation of Older Chevron Concentrically Braced Frames with Hollow and Concrete-Filled Braces.” Journal of Structural Engineering 144 (3): 04018007.
   Web of Science ®Google Scholar
• Uriz, P., and S. A. Mahin 2008. “Toward Earthquake-Resistance Design of Concentrically Braced Steel-Frame Structures.” Rep. No. PEER-2008/08. Berkeley, CA: Pacific Earthquake Engineering Research Center.
   Google Scholar
• Williams, G. C., and R. M. Richard. 1986. “Steel Connection Design Based on Inelastic Finite Element Analysis.” Report of the Department of Civil Engineering and Engineering Mechanics. The University of Arizona.
   Google Scholar
• Wu, R. Y., and C. P. Pantelides. 2017. “Rapid Repair and Replacement of Earthquake-Damaged Concrete Columns Using Plastic Hinge Relocation.” Composite Structures 180:467–483. https://doi.org/10.1016/j.compstruct.2017.08.051.
   Web of Science ®Google Scholar
• Yazdi, H. A., M. J. Hashemi, R. Al-Mahaidi, and E. Gad. 2021. “Multi-Axis Testing of Concrete-Filled Steel Tube Columns Forming Ductile Soft-Story in Multi-Story Buildings.” Journal of Constructional Steel Research 183:106736. https://doi.org/10.1016/j.jcsr.2021.106736.
   Web of Science ®Google Scholar