Strategy and management for the recycling of carbon fiber-reinforced polymers (CFRPs) in the aircraft industry: a critical review

References

• Airbus. 2014a. Eco-efficiency. Available from: http://www.airbus.com/innovation/eco-efficiency/design/
   Google Scholar
• Airbus. 2014b. A350 MSN2 rolls out of paint hangar with special ‘Carbon’ livery. Available from: http://www.airbus.com/presscentre/pressreleases/press-release-detail/detail/a350-msn2-rolls-out-of-paint-hangar-with-special-carbon-livery/
   Google Scholar
• Andersson F, Hagqvist A, Sundin E, Björkman M. 2014. Design for manufacturing of composite structures for commercial aircraft – the development of a DFM strategy at SAAB aerostructures. Procedia CIRP. 17:362–367.
   Google Scholar
• Asmatulu E, Overcash M, Twomey J. 2013. Recycling of aircraft: state of the art in 2011. J Ind Eng. 2013:1–8.
   Google Scholar
• Asmatulu E, Twomey J, Overcash M. 2014. Recycling of fiber-reinforced composites and direct structural composite recycling concept. J Compos Mater. 48:593–608.
   Web of Science ®Google Scholar
• Bai Y, Wang Z, Feng L. 2010. Chemical recycling of carbon fibers reinforced epoxy resin composites in oxygen in supercritical water. Mater Design. 31:999–1002.
   Web of Science ®Google Scholar
• Bertoti AR, Luporini S, Esperidião MCA. 2009. Effects of acetylation in vapor phase and mercerization on the properties of sugarcane fibers. Carbohyd Polym. 77:20–24.
   Web of Science ®Google Scholar
• Borbardier. 2014. Bombardier Aerospace delivers 238 aircraft and receives orders for 388 aircraft in 2013. Available from: http://www.bombardier.com/en/media-centre/newsList/details.bombardier-aerospace20140120bombardieraerospacedelivers238aircra.bombardiercom.html
   Google Scholar
• Budd L, Griggs S, Howarth D. 2013. Sustainable aviation futures: crisis, contested realities and prospects for chance. In: Budd L, Griggs S, Howarth D, editors. Transp sustain. Vol. 4. Somerville (MA): Emerald Group Publishing; p. 109–130. Available from: http://www.emeraldinsight.com/books.htm?issn=2044-9941&volume=4&chapterid=17103134&show=html
   Google Scholar
• CAPA - Centre For Aviation. 2015. Boeing, airbus share honours in 2013 orders/deliveries race - but it's not about winners and losers [Internet]. [cited 2015 Mar 5]. Available from: Centreforaviation.com.
   Google Scholar
• Castro AM, Ribeiro M, Santos J, Meixedo JP, Silva FJ, Fiúza A, Dinis M, Alvim MR. 2013. Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry. Constr Building Mater. 45:87–94.
   Web of Science ®Google Scholar
• Çelik A, Lazoglu I, Kara A, Kara F. 2015. Investigation on the performance of SiAlON ceramic drills on aerospace grade CFRP composites. J Mater Process Tech. 223:39–47.
   Web of Science ®Google Scholar
• [CEU] Council of the European Union. 2002. 2003/33/EC: Council Decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to article 16 of and annex II to directive 1999/31/EC. EUR-Lex.
   Google Scholar
• Connelly J. 2013. Coalition, aviation and the descent to politics as usual. In: Budd L, Griggs S, Howarth D, editors. Transp sustain. Somerville (MA): Emerald Group Publishing; p. 219–238.
   Google Scholar
• Daley B. 2012. Air transport and sustainable development. Aldershot (UK): Ashgate Publishing Ltd.
   Google Scholar
• [EC] European Commission. 2000. Directive 2000/53/EC of the European Parliament and the Council on end-of-life vehicles. Official Journal of the European Communities, 21st October 2000.
   Google Scholar
• Eguemann N, Giger L, Roux M, Dransfeld C, Thiebaud F, Perreux D. 2013. Compression moulding of complex parts for the aerospace with discontinuous novel and recycled thermoplastic composite materials. In: Proceedings of the 19th International Conference on Composite Materials; Jan 1; Montreal, QC.
   Google Scholar
• Embraer. 2014. Embraer cumpre estimativa de entregas de 2013 com 90 jatos comerciais e 119 executivos. Available from: http://www.embraer.com.br/Documents/noticias/001-Entregas%20Embraer%204T13-Ins-VRI-P-14.pdf
   Google Scholar
• Faruk O, Bledzki AK, Fink H-P, Sain M. 2012. Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci. 37:1552–1596.
   Web of Science ®Google Scholar
• Hansmann R, Mieg HA, Frischknecht P. 2012. Principal sustainability components: empirical analysis of synergies between the three pillars of sustainability. Int J Sust Dev World. 19:451–459.
   Web of Science ®Google Scholar
• Hawileh R, Nawaz W, Abdalla J, Saqan E. 2015. Effect of flexural CFRP sheets on shear resistance of reinforced concrete beams. Compos Struct. 122:468–476.
   Web of Science ®Google Scholar
• Jiang G, Pickering S, Walker G, Wong K, Rudd C. 2008. Surface characterisation of carbon fibre recycled using fluidised bed. Appl Surf Sci. 254:2588–2593.
   Web of Science ®Google Scholar
• Job S. 2010. Composite recycling: summary of recent research and development (September 2010). Knowledge Transfer Network. Available from: http://www.compositesuk.co.uk/LinkClick.aspx?fileticket=LXN-MfM0360=&
   Google Scholar
• Keivanpour S, Ait-Kadi D, Mascle C. 2013. Toward a strategic approach to end-of-life aircraft recycling projects: a research agenda in transdisciplinary context. JMS. 3:76–94.
   Google Scholar
• Kojima A, Furukawa S. 1997. Recycling of resin matrix composite materials VII: future perspective of FRP recycling. Adv Compos Mater. 6:215–225.
   Web of Science ®Google Scholar
• Lee H, Ohsawa I, Takahashi J. 2015. Effect of plasma surface treatment of recycled carbon fiber on carbon fiber-reinforced plastics (CFRP) interfacial properties. Appl Surf Sci. 328:241–246.
   Web of Science ®Google Scholar
• Liu Y, Liu J, Jiang Z, Tang T. 2012. Chemical recycling of carbon fibre reinforced epoxy resin composites in subcritical water: synergistic effect of phenol and KOH on the decomposition efficiency. Polym Degrad Stabil. 97:214–220.
   Web of Science ®Google Scholar
• Lombardo. 2006. Boeing 787 - from the ground up. AERO Magazine 4, 1–27. Available from: http://wwwboeingcom/commercial/aeromagazine/articles/qtr_4_06/article_04_2html
   Google Scholar
• Marsh G. 2003. Europe gets tough on end-of-life composites. Reinf Plast. 47:34–36.
   Google Scholar
• McConnell VP. 2010. Launching the carbon fibre recycling industry. Reinf Plast. 54:33–37.
   Google Scholar
• Mishnaevsky L Jr.. 2011. Composite materials in wind energy technology. 1st ed. Oxford (UK): EOLSS Publishers.
   Google Scholar
• Morin C, Loppinet-Serani A, Cansell F, Aymonier C. 2012. Near-and supercritical solvolysis of carbon fibre reinforced polymers (CFRPs) for recycling carbon fibers as a valuable resource: state of the art. J Supercrit Fluid. 66:232–240.
   Web of Science ®Google Scholar
• Nagel U, Rodriguez ES, Thomason J, Kao C-C. 2014. Regeneration of thermally recycled glass fibre for cost-effective composite recycling: performance of composites based on PP and recovered glass fibre. In: Proceedings of the 16th European Conference on Composite Materials; Jun 22–26; Seville.
   Google Scholar
• Ogi K, Nishikawa T, Okano Y, Taketa I. 2007. Mechanical properties of ABS resin reinforced with recycled CFRP. Adv Compos Mater. 16:181–194.
   Web of Science ®Google Scholar
• Ogi K, Shinoda T, Mizui M. 2005. Strength in concrete reinforced with recycled CFRP pieces. Compos Part A: Appl S. 36:893–902.
   Web of Science ®Google Scholar
• Onwudili JA, Yildirir E, Williams PT. 2013. Catalytic hydrothermal degradation of carbon reinforced plastic wastes for carbon fibre and chemical feedstock recovery. Waste Biomass Valor. 4:87–93.
   Web of Science ®Google Scholar
• Palmer J, Ghita O, Savage L, Evans K. 2009. Successful closed-loop recycling of thermoset composites. Compos Part A Appl S. 40:490–498.
   Web of Science ®Google Scholar
• Perry N, Bernard A, Laroche F, Pompidou S. 2012. Improving design for recycling–application to composites. CIRP Ann-Manuf Technol. 61:151–154.
   Web of Science ®Google Scholar
• Pickering S. 2006. Recycling technologies for thermoset composite materials—current status. Compos Part A Appl S. 37:1206–1215.
   Web of Science ®Google Scholar
• Pimenta S, Pinho ST. 2011. Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. Waste Manage. 31:378–392.
   PubMed Web of Science ®Google Scholar
• Pimenta S, Pinho ST. 2012. The effect of recycling on the mechanical response of carbon fibres and their composites. Compos Struct. 94:3669–3684.
   Web of Science ®Google Scholar
• Piñero-Hernanz R, García-Serna J, Dodds C, Hyde J, Poliakoff M, Cocero MJ, Kingman S, Pickering S, Lester E. 2008. Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions. J Supercrit Fluid. 46:83–92.
   Web of Science ®Google Scholar
• [PLM] Product Lifecycle Management. 2016. Definition, 2016. Available from: http://www.cimdata.com/plm/definition.html
   Google Scholar
• Robert KW, Parris TM, Leiserowitz AA. 2005. What is sustainable development? Goals, indicators, values, and practice. Environ Sci Pol Sustai Dev. 47:8–21.
   Google Scholar
• Roux M, Eguémann N, Giger L, Dransfeld C. 2013. High performance thermoplastic composite processing and recycling: from cradle to cradle. In: Proceedings of the 34th SAMPE Europe International Technical Conference & Forum 2013 (SEICO 13): Advanced Composites on its Way to Industrialization; Mar 11–12; Paris. SAMPE Europe; 482 pp.
   Google Scholar
• Rush S. 2007. Carbon fiber: life beyond the landfill. High-Perform Compos. 15:52–55.
   Google Scholar
• Schledjewski R, Grössing H, Konstantopolous S, Hueber C, Tonejc M. 2014. Christian Doppler laboratory for high efficient composite processing. BHM Berg-und Hüttenmännische Monatshefte. 159:41–49.
   Google Scholar
• Skouloudis A, Evangelinos K, Moraitis S. 2012. Journal of air transport management accountability and stakeholder engagement in the airport industry: an assessment of airports’ CSR reports. J Air Transp Manag. 18:16–20.
   Web of Science ®Google Scholar
• Son K-B, Lee DS, Lim S-R. 2015. Effect of technology convergence for tablet PC on potential environmental impacts from heavy metals. Int J Sust Dev World. 23:154–162.
   Web of Science ®Google Scholar
• Stoeffler K, Andjelic S, Legros N, Roberge J, Schougaard SB. 2013. Polyphenylene sulfide (PPS) composites reinforced with recycled carbon fiber. Compos Sci Technol. 84:65–71.
   Web of Science ®Google Scholar
• Toray Ind., Inc Japan. 2006. Demand growth. Company newsletter. Bangalore (India): Toray Ind., Inc Japan.
   Google Scholar
• Upham P. 2001. Environmental capacity of aviation: theoretical issues and basic research directions. J Environ Plan Manag. 44:721–734.
   Google Scholar
• Xu P, Li J, Ding J. 2013. Chemical recycling of carbon fibre/epoxy composites in a mixed solution of peroxide hydrogen and N, N-dimethylformamide. Compos Sci Tech. 82:54–59.
   Web of Science ®Google Scholar
• Yamaguchi A, Hashimoto T, Kakichi Y, Urushisaki M, Sakaguchi T, Kawabe K, Kondo K, Iyo H. 2015. Recyclable carbon fiber-reinforced plastics (CFRP) containing degradable acetal linkages: synthesis, properties, and chemical recycling. J Polym Sci Pol Chem. 53:1052–1059.
   Web of Science ®Google Scholar
• Yang Y, Boom R, Irion B, van Heerden D-J, Kuiper P, de Wit H. 2012. Recycling of composite materials. Chem Eng Process. 51:53–68.
   Web of Science ®Google Scholar