References
- F. Duddeck, Multidisciplinary optimization of car bodies, Struct. Multidisc. Opti. 35 (2008), pp. 375–389.
- Y. Gao and F. Sun, Multi-disciplinary optimisation for front auto body based on multiple optimisation methods, Int. J. Veh. Des. 57 (2011), pp. 178–195.
- X. Liao, Q. Li, X. Yang, W. Zhang, and W. Li, Multiobjective optimization for crash safety design of vehicles using stepwise regression model, Struct. Multidisc. Opti. 35 (2016), pp. 561–569.
- S. Hou, D. Dong, L. Ren, and X. Han, Multivariable crashworthiness optimization of vehicle body by unreplicated saturated factorial design, Struct. Multidisc. Opti. 46 (2012), pp. 891–905.
- M. Kiani, H. Shiozaki, and K. Motoyama, Simulation-based design optimisation to develop a lightweight body-in-white structure focusing on dynamic and static stiffness, Int. J. Veh. Des. 67 (2015), pp. 219–236.
- B. Youn, K. Choi, and L. Du, Enriched performance measure approach for reliability-based design optimization, AIAA J. 43 (2005), pp. 874–884.
- F. Li, Z. Luo, and G. Sun, Reliability-based multiobjective design optimization under interval uncertainty, CMES-Comp. Model. Eng. 74 (2011), pp. 39–64.
- C. Song and J. Lee, Reliability-based design optimization of knuckle component using conservative method of moving least squares meta-models, Probabilist. Eng. Mech. 26 (2011), pp. 364–379.
- S. Shetty, Multiobjective reliability-based and robust design optimisation for crashworthiness of a vehicle side impact, Int. J. Veh. Des. 67 (2015), pp. 347–367.
- E. Acar and K. Solanki, System reliability based vehicle design for crashworthiness and effects of various uncertainty reduction measures, Struct. Multidisc. Opti. 39 (2009), pp. 311–325.
- L. Duan, G. Li, A. Cheng, G. Sun, and K. Song, Multiobjective system reliability-based optimization method for design of a fully parametric concept car body, Eng. Optim. (2017), pp. 1-17. doi:10.1080/0305215X.2016.1241780
- X. Gu, G. Sun, G. Li, L. Mao, and Q. Li, A comparative study on multiobjective reliable and robust optimization for crashworthiness design of vehicle structure, Struct. Multidisc. Opti. 48 (2013), pp. 669–684.
- X. Lv, X. Gu, L. He, D. Zhou, and W. Liu, Reliability design optimization of vehicle front-end structure for pedestrian lower extremity protection under multiple impact cases, Thin Wall. Struct. 94 (2015), pp. 500–511.
- X. Lv, X. Huang, X. Gu, W. Liu, and G. Li, Reliability-based multiobjective optimisation of vehicle bumper structure holes for the pedestrian flexible legform impact, Int. J. Crashworthiness 21 (2016), pp. 198–210.
- W. Lim, J. Jang, S. Kim, T. Lee, J. Kim, K. Lee, C. Lee, and Y. Kim, Reliability-based design optimization of an automotive structure using a variable uncertainty, P. I. Mech. Eng. D-J. Aut. 230 (2016), pp. 1314–1323.
- X. Qu and R. Haftka, Reliability-based design optimization using probabilistic sufficiency factor, Struct. Multidisc. Opti. 27 (2004), pp. 314–325.
- S. Venkataraman, Reliability optimization using probabilistic sufficiency factor and correction response surface, Eng. Optim. 38 (2006), pp. 671–685.
- J. Fang, Y. Gao, G. Sun, and Q. Li, Multiobjective reliability-based optimization for design of a vehicle door, Finite Elem. Anal. Des. 67 (2013), pp. 13–21.
- H. Gargama, H. Gargamal, S. Chaturvedi, and A. Thakur, Reliability-based design optimization of electromagnetic shielding structure using neural networks and real-coded genetic algorithm, P. I. Mech. Eng. D-J. Mech, 228. (2014), pp. 1–11.
- E. Saliby, Descriptive sampling: a better approach to Monte Carlo simulation, J. Oper. Res. Soc. 41 (1990), pp. 1133–1142.
- K. Ziha, Descriptive sampling in structural safety, Struct. Saf. 17 (1995), pp. 33–41.
- J. Tu, K. Choi, and Y. Park, A new study on reliability based design optimization, J. Mech. Des. 121 (1999), pp. 557–564.
- X. Liang, Z. Lin, and P. Zhu, Acoustic analysis of damping structure with response surface method, Appl. Acoust. 68 (2007), pp. 1036–1053.
- W. Zhang and Y. Liu, Main factor sensitivity analysis based on response surface model updating of port crane structure, J. Coastal Res. 73 (2015), pp. 166–172.
- R. Hardy, Multiquadric equations of topography and other irregular surfaces, J. Geophys. Res. 76 (1971), pp. 1905–1915.
- J. Sacks, W. Welch, T. Mitchell, and H. Wynn, Design and analysis of computer experiments, Stat. Sci. 4 (1989), pp. 409–423.
- G. Sun, G. Li, S. Zhou, H. Li, S. Hou, and Q. Li, Crashworthiness design of vehicle by using multiobjective robust optimization, Struct. Multidisc. Opti. 44 (2011), pp. 99–110.
- M. Johnson, L. Moore, and D. Ylvisaker, Minimax and maximin distance designs, J. Stat. Plan. Infer. 26 (1990), pp. 131–148.
- C. Coello, G. Pulido, and M. Lechuga, Handling multiple objectives with particle swarm optimization, IEEE T. Evol. Comput. 8 (2004), pp. 256–279.
- Y. Wang, Multi-objective optimization for dynamic response of the car frame system, J. Vibro. 17 (2015), pp. 1392–8716.
- M. Cavazzuti, A. Baldini, E. Bertocchi, D. Costi, E. Torricelli, and P. Moruzz, High performance automotive chassis design: a topology optimization based approach, Struct. Multidisc. Opti. 44 (2011), pp. 45–56.
- P. Nguyen, J. Lee, H. Yim, S. Lee, and S. Heo, Analysis of vehicle structural performance during small-overlap frontal impact, Int. J. Auto. Tech. 16 (2015), pp. 799–805.
- C. Pedersen, Crashworthiness design of transient frame structures using topology optimization, Comput. Methods Appl. M. 193 (2004), pp. 653–678.
- Z. Xiao, J. Fang, G. Sun, and Q. Li, Crashworthiness design for functionally graded foam-filled bumper beam, Adv. Eng. Softw. 85 (2014), pp. 81–95.
- C. Lin, F. Gao, W. Wang, and X. Chen, Multi-objective optimization design for a battery pack of electric vehicle with surrogate models, J. Vibro. 18 (2016), pp. 2343–2358.
- C. Wang, D. Wang, and S. Zhang, Design and application of lightweight multi-objective collaborative optimization for a parametric body-in-white structure, P. I. Mech. Eng. D-J. Aut. 230 (2016), pp. 273–288.