Finite element analysis considering packaging efficiency of innovative battery pack designs

References

• Kukreja J, Nguyen T, Siegmund T, et al. Crash analysis of a conceptual electric vehicle with a damage tolerant battery pack. Extreme Mechan Lett. 2016;9:371–378.
   Web of Science ®Google Scholar
• Kuchenbuch K, Vietor T, Stieg J. Optimisation algorithms for the design of electric cars. ATZ Worldwide. 2011;113:16–19.
   Google Scholar
• Trattnig G, Leitgeb W. Automotive Battery Technology. Vol. 1. Cham, Switzerland: Springer International Publishing AG; 2014. Chapter 2, Battery Modelling for Crash Safety Simulation; p. 19–35. doi:10.1007/978-3-319-02523-0
   Google Scholar
• Eckstein L, Ginsberg S, Hartmann B, et al. Development, design and build-up of a crashdeformable battery pack for electric vehicles. VDI-Berichte 2011;2144:46–229.
   Google Scholar
• Funcke M, Sc¨afer S, Sturk D, et al. Simulation and active protection of li-ion traction batteries. ATZ Worldwide 2015;117:1, 10–15.
   Google Scholar
• Arora S, Shen W, Kapoor A. Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles. Renewable Sustain Energy Rev. 2016;60:1319–1331.
   Web of Science ®Google Scholar
• Khattab A, ElRahman A. Investigation of an adaptable crash energy management system to enhance vehicle crashworthiness [dissertation]. Concordia University; 2011.
   Google Scholar
• Ghadianlou A, Abdullah SB. Crashworthiness design of vehicle side door beams under low-speed pole side impacts. Thin-Walled Struct. 2013;67:25–33.
   Web of Science ®Google Scholar
• Dagdeviren S, Yavuz M, Kocabas MO, et al. Structural crashworthiness analysis of a ladder frame chassis subjected to full frontal and pole side impacts. Int J Crashworthiness. 2016;21:477–493.
   Web of Science ®Google Scholar
• Euro ncap safety campaigns; 2018. Available from: https://www.euroncap.com/en/vehicle-safety/safety-campaigns/.
   Google Scholar
• Mallett RH, Marcal PV. Finite element analysis of nonlinear structures. J Struct Div. 1968;94:2081–2106.
   Google Scholar
• Ha SK, Keilers C, Chang FK. Finite element analysis of composite structures containing distributed piezoceramic sensors and actuators. AIAA J. 1992;30:772–780.
   Google Scholar
• Zhang Y, Yang C. Recent developments in finite element analysis for laminated composite plates. Compos Struct. 2009;88:147–157.
   Web of Science ®Google Scholar
• Walker M, Smith RE. A technique for the multiobjective optimisation of laminated composite structures using genetic algorithms and finite element analysis. Compos Struct. 2003;62:123–128.
   Web of Science ®Google Scholar
• Kirkpatrick SW. Development and validation of high fidelity vehicle crash simulation models. SAE Technical Paper; 2000.
   Google Scholar
• Warner JT. The handbook of lithium-ion battery pack design: chemistry, components, types and terminology. Amsterdam: Elsevier; 2015.
   Google Scholar
• Shui L, Chen F, Garg A, et al. Design optimization of battery pack enclosure for electric vehicle. Struct Multidiscipl Optim. 2018;58(1):331–347.
   Web of Science ®Google Scholar
• Jaguemont J, Boulon L, Dubé. Y. A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures. Appl Energy. 2016;164:99–114.
   Web of Science ®Google Scholar
• Lu W, Xiao-Kai C, Qing-Hai Z. Muti-objective topology optimization of an electric vehicle’s traction battery enclosure. Energy Procedia. 2016;88:874–880.
   Google Scholar
• Reddy PR, Reddy PS, Reddy KVK. Vibration analysis of a torpedo battery tray using fea. Int J Res Eng Technol. 2014;2319–1163.
   Google Scholar
• Hooper J, Marco J. Understanding vibration frequencies experienced by electric vehicle batteries. Hybrid and Electric Vehicles Conference; 2013 (HEVC 2013). doi:10.1049/cp.2013.1908
   Google Scholar
• Lang JF, Kjell G. Comparing vibration measurements in an electric vehicle with standard vibration requirements for li-ion batteries using power spectral density analysis. Ijehv. 2015;7:272–286.
   Google Scholar
• Hooper JM, Marco J. Experimental modal analysis of lithium-ion pouch cells. J Power Sources. 2015;285:247–259.
   Web of Science ®Google Scholar
• Brand MJ, Schuster SF, Bach T, et al. Effects of vibrations and shocks on lithium-ion cells. J Power Sources. 2015;288:62–69.
   Web of Science ®Google Scholar
• Liu B, Yin S, Xu J. Integrated computation model of lithium-ion battery subject to nail penetration. Appl Energy. 2016;183:278–289.
   Web of Science ®Google Scholar
• Javani N, Dincer I, Naterer G, et al. Modeling of passive thermal management for electric vehicle battery packs with pcm between cells. Appl Thermal Eng. 2014; 73:307–316.
   Web of Science ®Google Scholar
• Allmann C, Ginsberg S, Schussler M, et al. Research project\e performance"{design approach for a holistic bev. In: 26th electric vehicle symposium; 2012. p. 463–469.
   Google Scholar
• Giess M, Tomas J. Improving safety performance in frontal collisions by changing the shape of structural components. In: 16th ESV Conference, Windsor, Canada; 1998. p. 222–228; 98-S1.
   Google Scholar
• Yamazaki K, Han J. Maximization of the crushing energy absorption of cylindrical shells. Adv Eng Softw. 2000;31:425–434.
   Web of Science ®Google Scholar
• Space engineering. ECSS-E-HB Part 7A 20 March 2011. AG Noordwijk The Netherlands: ESA Requirements and Standards Division ESTEC.
   Google Scholar
• Wahl L, Maas S, Waldmann D, et al. Shear stresses in honeycomb sandwich plates: Analytical solution, finite element method and experimental verification. J Sandwich Struct Mater. 2012;14:449–468.
   Web of Science ®Google Scholar
• Mardall J, Herron NH, Grace D, et al. Battery pack directed venting system; 2013. US Patent 8,557,416.
   Google Scholar
• Du Bois P, Chou CC, Fileta BB, et al. Vehicle crashworthiness and occupant protection. Michigan: American Iron and Steel Institute 2000 Town Center Southfield; 2004.
   Google Scholar
• Avalle M, Belingardi G, Montanini R. Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram. Int J Impact Eng. 2001;25:455–472.
   Web of Science ®Google Scholar
• Guler MA, Cerit ME, Bayram B, et al. The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading. Int J Crashworthiness. 2010;15:377–390.
   Web of Science ®Google Scholar
• Sun G, Li G, Zhou S, et al. Crashworthiness design of vehicle by using multiobjective robust optimization. Struct Multidisc Optim. 2011;44:99–110.
   Web of Science ®Google Scholar
• Sun G, Xu F, Li G, et al. Crashing analysis and multiobjective optimization for thinwalled structures with functionally graded thickness. Int J Impact Eng. 2014;64:62–74.
   Web of Science ®Google Scholar
• Wu S, Sun G, Wu X, et al. Crashworthiness analysis and optimization of fourier varying section tubes. Int J Non-Linear Mechan. 2017;92:41–58.
   Web of Science ®Google Scholar
• Administration N, et al. Laboratory test procedure for the new car assessment program side impact moving deformable barrier test. Washington, DC: US Department of Transportation. 2012.
   Google Scholar
• Ibrahim HK. Design optimization of vehicle structures for crashworthiness improvement. Montreal, Quebec, Canada: Concordia University; 2009.
   Google Scholar
• LS-DYNA® KEYWORD USER'S MANUAL I-III 2007. Livermore software technology corporation, Livermore, California; 1998.
   Google Scholar
• Sahraei E, Hill R, Wierzbicki T. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity. J Power Source. 2012;201:307–321.
   Web of Science ®Google Scholar
• Sahraei E, Meier J, Wierzbicki T. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells. J Power Source. 2014;247:503–516.
   Web of Science ®Google Scholar
• Sahraei E, Campbell J, Wierzbicki T. Modeling and short circuit detection of 18650 li-ion cells under mechanical abuse conditions. J Power Source. 2012;220:360–372.
   Web of Science ®Google Scholar
• Santosa SP, Wierzbicki T, Hanssen AG, et al. Experimental and numerical studies of foam-filled sections. Int J Impact Eng. 2000;24:509–534.
   Web of Science ®Google Scholar