Compression after impact of CFRE composites immersed in distilled water

References

• Rasuo B. Experimental study of structural damping of composite helicopter blades with different cores. Plast. Rubber Compos. 2010;39(1):1–5.
   Web of Science ®Google Scholar
• Vasudevan A, Senthil Kumaran S, Naresh K, et al. Layerwise damage prediction in carbon/Kevlar/S-glass/E-glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography. Int J Crashworth. 2019;25:9–23.
   Web of Science ®Google Scholar
• Fangyu C, Li Z, Yihao T. Damage and residual compressive strength of multi-layer composite laminates after low velocity impact. Int J Crashworth. 2019;24(2):235–241.
   Web of Science ®Google Scholar
• Sikarwar RS, Velmurugan R, Gupta NK. Effect of velocity and fibres on impact performance of composite laminates – Analytical and experimental approach. Int J Crashworth. 2017;22(6):589–601.
   Web of Science ®Google Scholar
• Khashaba UA, Othman R. Low-velocity impact of woven CFRE composites under different temperature levels. Int J Impact Eng. 2017;108:191–204.
   Web of Science ®Google Scholar
• Rasuo B. Experimental methodology for evaluating survivability of an aeronautical construction from composite materials: An overview. Int. J. Crashworth. 2007;12(1):9–15.
   Web of Science ®Google Scholar
• Guégan P, Othman R, LeBreton D, et al. Experimental investigation of rubber ball impacts on aluminium plates. Int J Crashworth. 2010;15(4):391–399.
   Web of Science ®Google Scholar
• Liu L, Zhao Z, Chen W, et al. Interlaminar shear property and high-velocity impact resistance of CFRP laminates after cyclic hygrothermal aging. Int J Crashworth. 2019;1–14.
   Web of Science ®Google Scholar
• Gupta AK, Velmurugan R, Joshi M, et al. Studies on shape memory alloy-embedded GFRP composites for improved post-impact damage strength. Int J Crashworth. 2019;24:363–379.
   Web of Science ®Google Scholar
• Kreculj D, Rašuo B. Review of impact damages modelling in laminated composite aircraft structures. Techn Gazette. 2013;20:485–495.
   Google Scholar
• Mitchell MR, Link RE, Rasuo B. Experimental techniques for evaluation of fatigue characteristics of laminated constructions from composite materials: full-scale testing of the helicopter rotor blades. J Test Eval. 2011;39(2):102768.
   Web of Science ®Google Scholar
• Dau F, Dano ML, Duplessis-Kergomard Y. Experimental investigations and variability considerations on 3D interlock textile composites used in low velocity soft impact loading. Compos Struct. 2016;153:369–379.
   Web of Science ®Google Scholar
• Priem C, Othman R, Rozycki P, et al. Experimental investigation of the crash energy absorption of 2.5D-braided thermoplastic composite tubes. Compos Struct. 2014;116:814–826.
   Web of Science ®Google Scholar
• Caminero MA, García-Moreno I, Rodríguez GP. Damage resistance of carbon fibre reinforced epoxy laminates subjected to low velocity impact: Effects of laminate thickness and ply-stacking sequence. Polym Test. 2017;63:530–541.
   Web of Science ®Google Scholar
• Khashaba UA, Othman R, Najjar I. Experimental analysis of composite scarf adhesive joints modified with multiwalled carbon nanotubes under bending and thermomechanical impact loads. Proc Inst Mech Eng Part L: J Mater Des Appl. 2019;234:48–64.
   PubMedGoogle Scholar
• Khashaba UA, Othman R, Najjar I. Development and characterization of structural adhesives for aerospace industry with alumina nanoparticles under shear and thermo-mechanical impact loads. Proc Inst Mech Eng Part G: J Aer Eng. 2019;234:490–507.
   Web of Science ®Google Scholar
• Arun KV, Basavarajappa S, Sherigara BS. Damage characterisation of glass/textile fabric polymer hybrid composites in sea water environment. Mater Des. 2010;31(2):930–939.
   Web of Science ®Google Scholar
• Khashaba UA, Aljinaidi AA, Hamed MA. Analysis of adhesively bonded CFRE composite scarf joints modified with MWCNTs. Compos Part A 2015;71:59–71.
   Web of Science ®Google Scholar
• Yahaya R, Sapuan SM, Jawaid M, et al. Water absorption behaviour and impact strength of kenaf-kevlar reinforced epoxy hybrid composites. Adv Compos Lett. 2016;25:89–102.
   Web of Science ®Google Scholar
• Ahmad F, Abbassi F, Hong JW, et al. Hygroscopic effects on the penetration-resistance behavior of a specially-orthtropic CFRP composite plates. Compos Struct. 2017;176:1073–1080.
   Web of Science ®Google Scholar
• Ahmad F, Hong JW, Choi HS, et al. Hygro effects on the low-velocity impact behavior of unidirectional CFRP composite plates for aircraft applications. Compos Struct. 2016;135:276–285.
   Web of Science ®Google Scholar
• Singh AK, Davidson BD. Effects of temperature, seawater and impact on the strength, stiffness, and life of sandwich composites. J Reinf Plast Compos. 2011;30(3):269–277.
   Web of Science ®Google Scholar
• Spronk SWF, Kersemans M, De Baerdemaeker JCA, et al. Comparing damage from low-velocity impact and quasi-static indentation in automotive carbon/epoxy and glass/polyamide-6 laminates. Polym. Test. 2018;65:231–241.
   Web of Science ®Google Scholar
• Khashaba UA, Aljinaidi AA, Hamed MA. Development of CFRE composite scarf adhesive joints with SiC and Al2O3 nanoparticle. Compos Struct. 2015;128:415–427.
   Web of Science ®Google Scholar
• Khashaba UA, Khdair AI. Open hole compressive elastic and strength analysis of CFRE composites for aerospace applications. Aerosp Sci Technol. 2017;60:96–107.
   Web of Science ®Google Scholar
• Gude MR, Prolongo SG, Ureña A. Hygrothermal ageing of adhesive joints with nanoreinforced adhesives and different surface treatments of carbon fibre/epoxy substrates. Int J Adhes Adhes. 2013;40:179–187.
   Web of Science ®Google Scholar
• Petiteau JC, Othman R, Guégan P, et al. A drop‐bar setup for the compressive testing of rubber‐like materials in the intermediate strain rate range. Strain. 2014;50(6):555–562.
   Web of Science ®Google Scholar
• Rajput MS, Burman M, Segalini A, et al. Design and evaluation of a novel instrumented drop-weight test rig for low-velocity impact testing of fiber-reinforced polymer composite. Polym Test. 2018;68:446–455.
   Web of Science ®Google Scholar
• Liang S, Guillaumat L, Gning PB. Impact behavior of flax/epoxy composite plates. Int J Impact Eng. 2015;80:56–64.
   Web of Science ®Google Scholar
• Muñoz E, García-Manrique A. Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites. Int J Polym Sci. 2015;2015:1–10.
   Web of Science ®Google Scholar
• Dhakal HN, Zhang ZY, Richardson MOW. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol. 2007;67(7–8):1674–1683.
   Web of Science ®Google Scholar
• Bullions TA, Loos AC, McGrath JE. Moisture sorption effects on and properties of a carbon fiber-reinforced phenylethynyl-terminated poly(etherimide). J Compos Mater. 2003;37(9):791–809.
   Web of Science ®Google Scholar
• Gibson RF. Principles of composite material mechanics. Singapore: McGraw-Hill, Inc., 1994.
   Google Scholar
• Othman R, Guegan P, Challita G, et al. A modified servo-hydraulic machine for testing at intermediate strain rates. Int J Impact Eng. 2009;36(3):460–467.
   Web of Science ®Google Scholar
• Diot S, Guines D, Gavrus A, et al. Two-step procedure for identification of metal behavior from dynamic compression tests. Int J Impact Eng. 2007;34:163–184.
   Web of Science ®Google Scholar
• Imielińska K, Guillaumat L. The effect of water immersion ageing on low-velocity impact behaviour of woven aramid–glass fibre/epoxy composites. Compos Sci Technol. 2004;64(13–14):2271–2278.
   Web of Science ®Google Scholar
• El-Qoubaa Z, Othman R. Strain rate sensitivity of polyetheretherketone’s compressive yield stress at low and high temperatures. Mech Mater. 2016;95:15–27.
   Web of Science ®Google Scholar
• El-Qoubaa Z, Othman R. Characterization and modeling of the strain rate sensitivity of polyetheretherketone’s compressive yield stress. Mater Des. 2015;66(PA):336–345.
   Google Scholar
• El-Qoubaa Z, Othman R. Tensile behavior of polyetheretherketone over a wide range of strain rates. Int J Polym Sci. 2015;2015:1–9.
   Web of Science ®Google Scholar
• Richeton J, Ahzi S, Daridon L, et al. A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures. Polymer. 2005;46(16):6035–6043.
   Web of Science ®Google Scholar
• Schmidt R. Effect of humidity and temperature on physical properties of matrix resins and carbon fiber composites. Mater Sci Monogr. 1986;41:311–320.
   Google Scholar
• Sideridis E, Venetis J, Kyriazi E, et al. of moisture absorption on the flexural properties of composites made of epoxy resin reinforced with low-content iron particles. Bull Mater Sci. 2017;40(4):805–817.
   Web of Science ®Google Scholar
• Mazor A, Broutman LJ, Eckstein BH. Effect of long-term water exposure on properties of carbon and graphite fiber reinforced epoxies. Polym Eng Sci. 1978;18(5):341–349.
   Web of Science ®Google Scholar
• Kostopoulos V, Baltopoulos A, Karapappas P, et al. Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes. Compos Sci Technol. 2010;70(4):553–563.
   Web of Science ®Google Scholar
• Waddoups ME, Eisenmann JR, Kaminski BE. Macroscopic fracture mechanics of advanced composite materials. J Compos Mater. 1971;5(4):446–454.
   Google Scholar
• Feraboli P, Kedward KT. A new composite structure impact performance assessment program. Compos Sci Technol. 2006;66(10):1336–1347.
   Web of Science ®Google Scholar
• Kannan VK, Murali V, Rajadurai A, et al. Tension and compression strength evaluation of composite plates with circular holes. J Reinf Plast Compos. 2010;29(10):1500–1514.
   Web of Science ®Google Scholar
• Belmonte HMS, Manger CIC, Ogin SL, et al. Characterisation and modelling of the notched tensile fracture of woven quasi-isotropic GFRP laminates. Compos Sci Technol. 2001;61(4):585–597.
   Web of Science ®Google Scholar
• Li G, Pang S-S, Helms JE, et al. low velocity impct response of GFRP laminates subjected to cycling moistures. Polym Compos. 2000;21(5):686–695.
   Web of Science ®Google Scholar