References
- Jamal-Omidi M, Benis AC. A numerical study on energy absorption capability of lateral corrugated composite tube under axial crushing. Int J Crashworthiness. 2019. DOI: https://doi.org/10.1080/13588265.2019.1699721
- Ashby MF, Evans AG, Fleck NA, et al. Metal foams: a design guide. Oxford: Butterworth Heinemann; 2000.
- Zhou HL, Zhang W, Liu T, et al. Finite element analyses on transverse impact behaviors of 3-D circular braided composite tubes with different braiding angles. Compos A. 2015;79:52–62.
- Chen LM, Zhang J, Du B, et al. Dynamic crushing behavior and energy absorption of graded lattice cylindrical structure under axial impact load. Thin-Walled Struct. 2018;127:333–343.
- Hong W, Fan HL, Xia ZC, et al. Axial crushing behaviors of multi-cell tubes with triangular lattices. Int J Impact Eng. 2014;63:106–117.
- Zheng G, Wu SZ, Sun GY, et al. Crushing analysis of foam-filled single and bitubal polygonal thin-walled tubes. Int J Mech Sci. 2014;87:226–240.
- Shen JH, Lu GX, Ruan D, et al. Lateral plastic collapse of sandwich tubes with metal foam core. Int J Mech Sci. 2015;91:99–109.
- Liang MZ, Lu FY, Zhang GD, et al. Experimental and numerical study of aluminum foam-cored sandwich tubes subjected to internal air blast. Compos B. 2017;125:134–143.
- Li ZB, Zheng ZJ, Yu JL, et al. Crashworthiness of foam-filled thin-walled circular tubes under dynamic bending. Mater Des. 2013;52:1058–1064.
- Goel MD. Deformation, energy absorption and crushing behavior of single-, double- and multi-wall foam filled square and circular tubes. Thin-Walled Struct. 2015;90:1–11.
- Kılıçaslan C. Numerical crushing analysis of aluminum foam-filled corrugated single- and double-circular tubes subjected to axial impact loading. Thin-Walled Struct. 2015;96:82–94.
- Santosa S, Wierzbicki T. Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns. Int J Mech Sci. 1999;41(8):995–1019.
- Santosa S, Banhart J, Wierzbicki T. Experimental and numerical analyses of bending of foam-filled sections. Acta Mech. 2001;148(1–4):199–213.
- Chen W. Experimental and numerical study on bending collapse of aluminum foam-filled hat profiles. Int J Solids Struct. 2001;38(44–45):7919–7944.
- Shojaeifard MH, Zarei HR, Talebitooti R, et al. Bending behavior of empty and foam-filled aluminum tubes with different cross-sections. Acta Mech Solida Sin. 2012;25(6):616–626.
- Duarte I, Vesenjak M, Krstulović-Opara L. Dynamic and quasi-static bending behaviour of thin-walled aluminium tubes filled with aluminium foam. Compos Struct. 2014;109:48–56.
- Zhang JX, Qin QH, Yang Y, et al. Large-deflection bending of clamped metal foam-filled rectangular tubes. Int J Appl Mech.. 2017;9(3):1750043.
- SamPath V, Rao CL, Reddy S. Energy absorption of foam filled aluminum tubes under dynamic bending. Procedia Manuf. 2017;7:225–233.
- Mohammadiha O, Ghariblu H. Crashworthiness study and optimisation of free inversion foam-filled tubes under dynamic loading. Int J Crashworthiness. 2018;23(6):605–617.
- Guo LW, Yu JL. Dynamic bending response of double cylindrical tubes filled with aluminum foam. Int J Impact Eng. 2011;38(2–3):85–94.
- Djamaluddin F, Abdullah S, Ariffin AK, et al. Optimization of foam-filled double circular tubes under axial and oblique impact loading conditions. Thin-Walled Struct. 2015;87:1–11.
- Jiang P, Wang QD, Yin AD, et al. Optimization design for foam-filled double cylindrical tubes under multiple lateral impacts. Adv Mech Eng. 2018;10:1–13.
- Jones N. Structural impact. Cambridge: Cambridge University; 1989.
- Liu JH, Jones N. Dynamic response of a rigid plastic clamped beam struck by a mass at any point on the span. Int J Solids Struct. 1988;24(3):251–270.
- Qin QH, Wang TJ. Low-velocity heavy-mass impact response of slender metal foam core sandwich beam. Compos Struct. 2011;93(6):1526–1537.
- Deshpande VS, Fleck NA. Isotropic constitutive models for metallic foams. J Mech Phy Solids. 2000;48(6–7):1253–1283.