Cold metal transfer welding of aluminium to magnesium: microstructure and mechanical properties

References

• H. Y. Wang, L. M. Liu, M. L. Zhu and H. Wang: ‘Laser weld bonding of A6061Al alloy to AZ31B Mg alloy’, Sci. Technol. Wel. J., 2007, 12, (3), 261–265. doi: 10.1179/174329307X159784
   Web of Science ®Google Scholar
• Z. Yang and J. P. Li: ‘Review on research and development of magnesium alloys’, Acta Metall. Sin., 2001, 21, (5), 313–328. doi: 10.1016/S1006-7191(08)60054-X
   Google Scholar
• J. K. Larsson: ‘Overview of joining technologies in the automotive industry’, Wel. Res. Abroad, 2003, 49, (6), 29–45.
   Google Scholar
• L. M. Liu and X. Zhao: ‘Study on the weld joint of Mg alloy and steel by laser-GTA hybrid welding’, J. Mater. Sci., 2008, 59, (9), 1279–1284.
   Google Scholar
• P. Liu, J. Wang and H. R. Geng: ‘A study of phase constitution near the interface of Mg/Al vacuum diffusion bonding’, Mater. Lett., 2005, 59, (16), 2001–2005. doi: 10.1016/j.matlet.2005.02.038
   Web of Science ®Google Scholar
• G. Mahendran, V. Balasubramanian and T. Senthilvelan: ‘Developing diffusion bonding windows for joining AZ31B magnesium–AA2024 aluminium alloys’, Mater. Des., 2009, 30, (4), 1240–1244. doi: 10.1016/j.matdes.2008.06.015
   Web of Science ®Google Scholar
• D. Dietrich, D. Nickel, M. Krause, T. Lampke, M. P. Coleman and V. Randle: ‘Formation of intermetallic phases in diffusion-welded joints of aluminium and magnesium alloys’, J. Mater. Sci., 2011, 46, (2), 357–364. doi: 10.1007/s10853-010-4841-5
   Web of Science ®Google Scholar
• Sato, Y. S., S. H. C. Park, M. Michiuchi and H. Kokawa: ‘Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys’, Scr. Mater., 2004, 50, (9), 1233–1236. doi: 10.1016/j.scriptamat.2004.02.002
   Web of Science ®Google Scholar
• F. Vahid and K. Sindo: ‘Formation of liquid and intermetallics in Al-to-Mg friction stir welding’, Metall. Mater. Trans. A, 2010, 41, (12), 3238–3251. doi: 10.1007/s11661-010-0366-4
   Web of Science ®Google Scholar
• X. P. Zhang, T. H. Yang, S. Castagne and J. T. Wang: ‘Microstructure bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling’, Mater. Sci. Eng. A, 2011, 528, (4), 1954–1960. doi: 10.1016/j.msea.2010.10.105
   Web of Science ®Google Scholar
• R. Borrisutthekul, Y. Miyashita and Y. Mutoh: ‘Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-O’, Sci. Technol. Adv. Mat., 2005, 6, (2), 199–204. doi: 10.1016/j.stam.2004.11.014
   Web of Science ®Google Scholar
• K. Haragaa, K. Taguchib, K. Yodab and Y. Nakashimac: ‘Assembly technique for control panel enclosures with the combined use of adhesive and rivets and the reduction of energy consumption’, Int. J. Adhesion Adhes., 2003, 23, (5), 371–376. doi: 10.1016/S0143-7496(03)00066-6
   Web of Science ®Google Scholar
• A. Durgutlu, B. Gulenc and F. Findik: ‘Examination of copper/stainless steel joints formed by explosive welding’, Mater. Des., 2005, 26, (6), 497–507. doi: 10.1016/j.matdes.2004.07.021
   Web of Science ®Google Scholar
• M. Honarpisheh, M. Asemabadi and M. Sedighi: ‘Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer’, Mater. Des., 2012, 37, 122–127. doi: 10.1016/j.matdes.2011.12.045
   Web of Science ®Google Scholar
• Y. C. Chen and K. Nakata: ‘Friction stir lap joining aluminum and magnesium alloys’, Scr. Mater., 2008, 58, (6), 433–436. doi: 10.1016/j.scriptamat.2007.10.033
   Web of Science ®Google Scholar
• R. Cao, B. F. Wen, J. H. Chen and P.-C. Wang: ‘Cold Metal Transfer joining of magnesium AZ31B-to-aluminum A6061-T6’, Mater. Sci. Eng. A, 2013, 560, 256–266. doi: 10.1016/j.msea.2012.09.065
   Web of Science ®Google Scholar
• R. Cao, M. Jing, Z. Feng and J. H. Chen: ‘Cold metal transfer welding-brazing of magnesium to pure copper’, Sci. Technol. Weld. Join., 2014, 19, (6), 451–460. doi: 10.1179/1362171814Y.0000000204
   Web of Science ®Google Scholar
• J. Shen, Y. Li, T. Zhang, D. Peng, D. Wang and N. Xu: ‘Preheating friction stir spot welding of Mg/Al alloys in various lap configurations’, Sci. Technol. Weld. Join., 2015, 20, (1), 1–10. doi: 10.1179/1362171814Y.0000000248
   Web of Science ®Google Scholar
• A. Elrefaey: ‘Effectiveness of cold metal transfer process for welding 7075 aluminium alloys’, Sci. Technol. Weld. Join., 2015, 20, (4), 280–285. doi: 10.1179/1362171815Y.0000000017
   Web of Science ®Google Scholar
• J. Shang, K. Wang, Q. Zhou, D. Zhang, J. Huang and G. Li: ‘Microstructure characteristics and mechanical properties of cold metal transfer welding Mg/Al dissimilar metals’, Mater. Des., 2012, 34, 559–565. doi: 10.1016/j.matdes.2011.05.008
   Web of Science ®Google Scholar
• M. Warmuzeka, G. Mrowkab and J. Sieniawskib: ‘Influence of heat treatment on the precipitation of the intermetallic phases in commercial AlMn1FeSi alloy’, J. Mater. Process. Technol., 2004, 157-158, 624–632. doi: 10.1016/j.jmatprotec.2004.07.125
   Web of Science ®Google Scholar
• Y. Zhu, D. a. Cullen, S. Kar, M. l. Free and L. F. Allard: ‘Evaluation of Al3Mg2 precipitates and Mn-rich phasein aluminum-magnesium alloy based on scanning transmission electron microscopy imaging’, Metall. Mater. Trans. A, 2012, 43, (13), 4933–4939. doi: 10.1007/s11661-012-1354-7
   Web of Science ®Google Scholar
• N. Yamamoto, J. Liao, S. Watanabe and K. Nakata: ‘Effect of intermetallic compound layer on tensile strength of dissimilar friction-stir weld of a high strength Mg alloy and Al alloy’, Mater. Trans., 2009, 50, (12), 2833–2838. doi: 10.2320/matertrans.M2009289
   Web of Science ®Google Scholar
• J. C. Lee, S. H. Lee, S. W. Kim and D. Y. Hwang: ‘The thermal behavior of aluminum 5083 alloys deformed by equal channel angular pressing’, Thermochim Acta, 2012, 499, (1), 100–105.
   Web of Science ®Google Scholar
• C. Y. Sun and L. F. Mondolfo: ‘A clarification of the phases occurring in Al-rich Al-Fe-Si alloys’, J. Inst. Met., 1967, 95, 384.
   Google Scholar
• R. Cao, Z. Feng and J. H. Chen: ‘Microstructures and properties of titanium–copper lap welded joints by cold metal transfer technology’, Mater. Des., 2014, 53, 192–201. doi: 10.1016/j.matdes.2013.06.030
   Web of Science ®Google Scholar