Dissimilar Al/steel friction stir spot welding: To penetrate into the lower steel sheet or not?

References

• Y. C. Chen, T. Komazaki, Y. G. Kim, T. Tsumura and K. Nakata: ‘Interface microstructure study of friction stir lap joint of AC4C cast aluminium alloy and zinc-coated steel’, Mater. Chem. Phys., 2008, 111, 375–380. doi:10.1016/j.matchemphys.2008.04.038.
   Web of Science ®Google Scholar
• Z. Shen, Y. Chen, J. S. C. Hou, X. Yang and A. P. Gerlich: ‘Influence of processing parameters on microstructure and mechanical performance of refill friction stir spot welded 7075-T6 aluminium alloy’, Sci. Technol. Weld. Join., 2015, 20, 48–57. doi:10.1179/1362171814Y.0000000253.
   Web of Science ®Google Scholar
• S. Venukumar, S. G. Yalagi, S. Muthukumaran and S. V. Kailas: ‘Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets’, Sci. Technol. Weld. Join., 2014, 19, 214–223. doi:10.1179/1362171813Y.0000000181.
   Web of Science ®Google Scholar
• Y. Chen, J. Chen, B. Shalchi Amirkhiz, M. J. Worswick and A. P. Gerlich: ‘Microstructures and properties of Mg alloy/DP600 steel dissimilar refill friction stir spot welds’, Sci. Technol. Weld. Join., 2015, 20, 494–501. doi:10.1179/1362171815Y.0000000033.
   Web of Science ®Google Scholar
• R. Sarkar, T. K. Pal and M. Shome: ‘Microstructures and properties of friction stir spot welded DP590 dual phase steel sheets’, Sci. Technol. Weld. Join., 2014, 19, 436–442. doi:10.1179/1362171814Y.0000000210.
   Web of Science ®Google Scholar
• R. Qiu, C. Iwamoto and S. Satonaka: ‘Interfacial microstructure and strength of steel/aluminium alloy joints welded by resistance spot welding with cover plate’, J. Mater. Process. Technol., 2009, 209, 4186–4193. doi:10.1016/j.jmatprotec.2008.11.003.
   Web of Science ®Google Scholar
• M. Movahedi, A. H. Kokabi, S. M. Seyed Reihani and H. Najafi: ‘Mechanical and microstructural characterisation of Al-5083/St-12 lap joints made by friction stir welding’, Procedia Eng., 2011, 10, 3297–3303. doi:10.1016/j.proeng.2011.04.544.
   Google Scholar
• S. Bozzi, A. L. Helbert-Etter, T. Baudin, B. Criquic and J. G. Kerbiguet: ‘Intermetallic compounds in Al 6016/IF-steel friction stir spot welds’, Mater. Sci. Eng. A, 2010, 527, 4505–4509. doi:10.1016/j.msea.2010.03.097.
   Web of Science ®Google Scholar
• H. Badarinarayan, Y. Shi, X. Li and K. Okamoto: ‘Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminium 5754-O sheets’, Int. J. Mach. Tools Manuf., 2009, 49, 814–823. doi:10.1016/j.ijmachtools.2009.06.001.
   Web of Science ®Google Scholar
• Y. H. Yin, A. Ikuta and T. H. North: ‘Microstructural features and mechanical properties of AM60 and AZ31 friction stir spot welds’, Mater. Des., 2010, 31, 4764–4776. doi:10.1016/j.matdes.2010.05.005.
   Web of Science ®Google Scholar
• A. Elrefaey, M. Gouda, M. Takahashi and K. Ikeuchi: ‘Characterization of aluminium/steel lap joint by friction stir welding’, J. Mater. Eng. Perform., 2005, 14, 10–17. doi:10.1361/10599490522310.
   Web of Science ®Google Scholar
• Z. W. Chen, S. Yazdanian and G. Littlefair: ‘Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds’, J. Mater. Sci., 2013, 48, 2624–2634. doi:10.1007/s10853-012-7056-0.
   Web of Science ®Google Scholar
• Y. C. Chen and K. Nakata: ‘Effect of tool geometry on microstructure and mechanical properties of friction stir lap welded magnesium alloy and steel’, Mater. Des., 2009, 30, 3913–3919. doi:10.1016/j.matdes.2009.03.007.
   Web of Science ®Google Scholar
• Z. Shen, Y. Chen, M. Haghshenas and A. P. Gerlich: ‘Role of welding parameters on interfacial bonding in dissimilar steel/aluminum friction stir welds’, Eng. Sci. Technol. Int. J., 2015, 18, 270–277. doi:10.1016/j.jestch.2014.12.008.
   Google Scholar
• V.-X. Tran, J. Pan and T. Pan: ‘Effects of processing time on strengths and failure modes of dissimilar spot friction welds between aluminum 5754-O and 7075-T6 sheets’, J. Mater. Process. Technol., 2009, 209, 3724–3739. doi:10.1016/j.jmatprotec.2008.08.028.
   Web of Science ®Google Scholar
• Z. Zhang, X. Yang, J. Zhang, G. Zhou, X. Xu and B. Zou: ‘Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy’, Mater. Des., 2011, 32, 4461–4470. doi: 10.1016/j.matdes.2011.03.058
   Web of Science ®Google Scholar
• M. Movahedi, A. H. Kokabi, S. M. Seyed Reihani and H. Najafi: ‘Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding’, Sci. Technol. Weld. Join., 2012, 17, 162–167. doi:10.1179/1362171811Y.0000000092.
   Web of Science ®Google Scholar
• R. Padmanabhan, M. C. Oliveira and L. F. Menezes: ‘Deep drawing of aluminium-steel tailor-welded blanks’, Mater. Des., 2008, 29, 154–160. doi:10.1016/j.matdes.2006.11.007.
   Web of Science ®Google Scholar
• H. T. Zhang, J. C. Feng, P. He and H. Hackl: ‘Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process’, Mater. Charact., 2007, 58, 588–592. doi: 10.1016/j.matchar.2006.07.008
   Web of Science ®Google Scholar