Iterative mesh-based hardness mapping

References

• Maier A, Uhl A. Areamap and Gabor filter based Vickers hardness indentation measurement. European Signal Processing Conference; 2013. p. 1–5. ISSN 22195491
   Google Scholar
• Maier A, Uhl A. Robust automatic indentation localisation and size approximation for vickers microindentation hardness indentations. 7th International Symposium on Image and Signal Processing and Analysis (ISPA 2011); 2011. p. 295–300.
   Google Scholar
• Meyers MA, Chawla KK. Mechanical behavior of materials; 2009. ISBN 9780521866750
   Google Scholar
• Tabor D. A simple theory of static and dynamic hardness; 1948. ISSN 1364–5021
   Google Scholar
• NACE. Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production. Part 1: General principles for selection of cracking-resistant materials. ANSI/NACE MR0175/ISO 15156-1; 2009.
   Google Scholar
• ASME. 2010 ASME boiler & pressure vessel code: IX qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators; 2011.
   Google Scholar
• Zhang P, Li SX, Zhang ZF. General relationship between strength and hardness. Mater Sci Eng A. 2011;529(1):62–73. ISSN 09215093 doi: 10.1016/j.msea.2011.08.061
   Web of Science ®Google Scholar
• Bishop RF, Hill R, Mott NF. The theory of indentation and hardness tests. Proc Phys Soc. 1945;57(3):147–159. ISSN 0959-5309 doi: 10.1088/0959-5309/57/3/301
   Google Scholar
• Cheng Y-T, Cheng C-M. Scaling, dimensional analysis, and indentation measurements. Mater Sci Eng R: Rep. 2004;44(4–5):91–149. ISSN 0927796X doi: 10.1016/j.mser.2004.05.001
   Web of Science ®Google Scholar
• Johnson KL. The correlation of indentation experiments. J Mech Phys Solids. 1970;18(2):115–126. ISSN 002250963 doi: 10.1016/0022-5096(70)90029-3
   Web of Science ®Google Scholar
• Hart PHM. Yield strength from hardness data. The Welding Institute Research Bulletin; 1975. p. 176.
   Google Scholar
• Pargeter RJ. Yield strength from hardness – a reappraisal for weld metal. The Welding Institute Research Bulletin; 1978. p. 325–326.
   Google Scholar
• Pavlina EJ, Van Tyne CJ. Correlation of yield strength and tensile strength with hardness for steels. J Mater Eng Perform. 2008;17(6):888–893. ISSN 10599495 doi: 10.1007/s11665-008-9225-5
   Web of Science ®Google Scholar
• Hamelin CJ, Muránsky O, Smith MC, et al. Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments. Acta Mater. 2014;75:1–19. ISSN 13596454 doi: 10.1016/j.actamat.2014.04.045
   Web of Science ®Google Scholar
• Cooper AJ, Cooper NI, Bell A, et al. A microstructural study on the observed differences in Charpy impact behavior between hot isostatically pressed and forged 304L and 316L austenitic stainless steel. Metall Mater Trans A. 2015;46(11):5126–5138. ISSN 1073-5623 doi: 10.1007/s11661-015-3140-9
   Web of Science ®Google Scholar
• Ghazanfari H, Naderi M. Influence of welding parameters on microstructure and mechanical performance of resistance spot welded high strength steels. Acta Metall Sin (English Lett). 2013;26(5):635–640. ISSN 10067191 doi: 10.1007/s40195-013-0076-1
   Web of Science ®Google Scholar
• Kavousi Sisi A, Mirsalehi SE. Prediction of microstructure and mechanical properties of line pipe welded joints based on hardness map. Sci Technol Welding Joining. 2015;21(1):43–52. ISSN 1362-1718 doi: 10.1179/1362171815Y.0000000064
   Web of Science ®Google Scholar
• Moon DW, Lambrakos SG, Wong RJ, et al. Temperature, macrostructure and hardness in high strength low alloy steel welds. Sci Technol Welding Joining. 2003;8(5):334–339. ISSN 1362-1718 doi: 10.1179/136217103225005561
   Web of Science ®Google Scholar
• Moon DW, Lambrakos SG, Wong RJ, et al. Macrostructure, hardness, and temperature in HSLA100 steel weld. Sci Technol Welding Joining. 2003;8(2):95–101. ISSN 1362-1718 doi: 10.1179/136217103225010880
   Web of Science ®Google Scholar
• Qiao D, Zhang W, Pan T-Y, et al. Evaluation of residual plastic strain distribution in dissimilar metal weld by hardness mapping. Sci Technol Welding Joining. 2013;18(7):624–630. ISSN 1362-1718 doi: 10.1179/1362171813Y.0000000144
   Web of Science ®Google Scholar
• Metzbower EA, Denney PE, Moon DW, et al. Thermal analysis and microhardness mapping in hybrid laser welds in a structural steel. Mater Sci Forum. 2003;426–432:4147–4152. ISSN 1662-9752 doi: 10.4028/www.scientific.net/MSF.426-432.4147
   Google Scholar
• Roy MJ. HardnessMap, June 2016. Available from: http://dx.doi.org/10.5281/zenodo.54761
   Google Scholar
• Persson P-O, Strang G. A simple mesh generator in MATLAB. SIAM Rev. 2004;46(2):329–345. doi: 10.1137/S0036144503429121
   Web of Science ®Google Scholar
• Smith MC, Smith AC, Wimpory R, et al. A review of the NeT task group 1 residual stress measurement and analysis round robin on a single weld bead-on-plate specimen. Int J Press Vessels Piping. 2014;120–121(1):93–140. ISSN 03080161 doi: 10.1016/j.ijpvp.2014.05.002
   Web of Science ®Google Scholar
• Altenkirch J. Stress engineering of friction stir welding: measurement and control of welding residual stresses [PhD Thesis]. Manchester: University of Manchester; 2009.
   Google Scholar
• Threadgill PL, Leonard AJ, Shercliff HR, et al. Friction stir welding of aluminium alloys. Int Mater Rev. 2009;54(2):49–93. ISSN 0950-6608 doi: 10.1179/174328009X411136
   Web of Science ®Google Scholar