Influence of zinc on intermetallic compounds formed in friction stir welding of AA5754 aluminium alloy to galvanised ultra-high strength steel

References

• Dehghani M, Amadeh A, Mousavi SAA. Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel. Mater Des. 2013;49:433–441. doi: 10.1016/j.matdes.2013.01.013
   Web of Science ®Google Scholar
• Haghshenas M, Abdel-Gwad A, Omran AM, et al. Friction stir weld assisted diffusion bonding of 5754 aluminum alloy to coated high strength steels. Mater Des. 2014;55:442–449. doi: 10.1016/j.matdes.2013.10.013
   Web of Science ®Google Scholar
• Kimapong K, Watanabe T. Lap joint of A5083 aluminum alloy and SS400 steel by friction stir welding. Mater Trans. 2005;46:835–841. doi: 10.2320/matertrans.46.835
   Web of Science ®Google Scholar
• Movahedi M, Kokabi AH, Seyed Reihani SM, et al. Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding. Sci Technol Weld Join. 2012;17:162–167. doi: 10.1179/1362171811Y.0000000092
   Web of Science ®Google Scholar
• Ratanathavorn W, Melander A, Magnusson H. Intermetallic compounds in friction stirred lap joints between AA5754/galvanised ultra-high strength steel. Sci Technol Weld Join. 2016;21:653–659. doi: 10.1080/13621718.2016.1163878
   Web of Science ®Google Scholar
• van der Rest C, Jacques P, Simar A. On the joining of steel and aluminium by means of a new friction melt bonding process. Scr Mater. 2014;77:25–28. doi: 10.1016/j.scriptamat.2014.01.008
   Web of Science ®Google Scholar
• Liyanage T, Kilbourne J, Gerlich AP, et al. Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds. Sci Technol Weld Join. 2009;14:500–508. doi: 10.1179/136217109X456960
   Web of Science ®Google Scholar
• Bozzi S, Helbert-Etter AL, Baudin T, et al. Intermetallic compounds in Al 6016/IF-steel friction stir spot welds. Mater Sci Eng A. 2010;527:4505–4509. doi: 10.1016/j.msea.2010.03.097
   Web of Science ®Google Scholar
• Zhang G, Su W, Zhang J, et al. Friction stir brazing: a novel process for fabricating Al/steel layered composite and for dissimilar joining of Al to steel. Metall Mater Trans A. 2011;42:2850–2861. doi: 10.1007/s11661-011-0677-0
   Web of Science ®Google Scholar
• Elrefaey A, Takahashi M, Ikeuchi K. Friction-stir-welded lap joint of aluminum to zinc-coated steel. Q J Jpn Weld Soc. 2005;23:186–193. doi: 10.2207/qjjws.23.186
   Google Scholar
• Chen YC, Nakata K. Effect of the surface state of steel on the microstructure and mechanical properties of dissimilar metal lap joints of aluminum and steel by friction stir welding. Metall Mater Trans A. 2008;39:1985–1992. doi: 10.1007/s11661-008-9523-4
   Web of Science ®Google Scholar
• Ratanathavorn W, Melander A, Magnusson H. Proceedings of the 10th International Symposium on Friction Stir Welding; 2014 May 20–22; Beijing, China.
   Google Scholar
• Bouché K, Barbier F, Coulet A. Intermetallic compound layer growth between solid iron and molten aluminium. Mater Sci Eng A. 1998;249:167–175. doi: 10.1016/S0921-5093(98)00573-5
   Web of Science ®Google Scholar
• Springer H, Szczepaniak A, Raabe D. On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys. Acta Mater. 2015;96:203–211. doi: 10.1016/j.actamat.2015.06.028
   Web of Science ®Google Scholar
• Cook GO, Sorensen CD. Overview of transient liquid phase and partial transient liquid phase bonding. J Mater Sci. 2011;46:5305–23. doi: 10.1007/s10853-011-5561-1
   Web of Science ®Google Scholar
• Nandan R, Roy GG, Lienert TJ, et al. Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel. Sci Technol Weld Join. 2006;11:526–37. doi: 10.1179/174329306X107692
   Web of Science ®Google Scholar
• Perrot P, Tissier JC, Dauphin JY. Stable and metastable equilibria in the Fe-Zn-Al system at 450°C. Z Metallkd. 1992;83:786–790.
   Google Scholar
• Nakano J, Malakhov DV, Yamaguchi S, et al. A full thermodynamic optimization of the Zn–Fe–Al system within the 420–500°C temperature range. Calphad. 2007;31:125–140. doi: 10.1016/j.calphad.2006.09.003
   Web of Science ®Google Scholar
• Dong H, Yang L, Dong C, et al. Improving arc joining of Al to steel and Al to stainless steel. Mater Sci Eng A. 2012;534:424–435. doi: 10.1016/j.msea.2011.11.090
   Web of Science ®Google Scholar
• Marder AR. The metallurgy of zinc-coated steel. Prog Mater Sci. 2000;45:191–271. doi: 10.1016/S0079-6425(98)00006-1
   Web of Science ®Google Scholar