References
- Rabinkin A. Brazing with (NiCoCr)-B-Si amorphous brazing filler metals: alloys, processing, joint structure, properties, applications. Sci TechnolWeld Joining. 2004;9:181–199. doi: 10.1179/136217104225012300
- Gale DABWF. Transient liquid phase bonding-overview. Sci Technol Weld Joining. 2004;9:1–18. doi: 10.1179/136217104225021724
- Zhou Y, Gale WF, North TH. Modelling of transient liquid phase bonding. Int Mater Rev. 1995;40:181–196. doi: 10.1179/imr.1995.40.5.181
- Philips NR, Levi CG, Evans AG. Mechanisms of microstructure evolution in an Austenitic Stainless steel bond Generated using a quaternary braze alloy. Metall Mater Trans A. 2008;39:142–149. doi: 10.1007/s11661-007-9382-4
- Pouranvari M, Ekrami A, Kokabi AH. Diffusion brazing Metallurgy of IN718/Ni-Cr-Si-B-Fe/IN718. Weld J. 2014;93:60s–68s.
- Pouranvari M, Ekrami A, Kokabi AH. Phase transformation during diffusion brazing of IN718/Ni–Cr-B/IN718. Mater Sci Technol. 2013;29:980–984. doi: 10.1179/1743284713Y.0000000238
- Pouranvari M, Ekrami A, Kokabi AH. Solidification and solid state phenomena during TLP bonding of IN718 superalloy using Ni–Si–B ternary filler alloy. J Alloys Compd. 2013;563:143–149. doi: 10.1016/j.jallcom.2013.02.100
- Pouranvari M, Ekrami A, Kokabi AH. Role of base-metal composition in isothermal solidification during diffusion brazing of nickel-based superalloys. Sci Technol Weld Joining. 2018;23:13–18. doi: 10.1080/13621718.2017.1327934
- Riggs BB, Alexandrov BB, Benatar AA, et al. Thermodynamic and kinetic simulations of high temperature brazing: microstructure evolution in CMSX-4 joints. Sci Technol Weld Joining. 2017;22:428–437. doi: 10.1080/13621718.2016.1250432
- Sadeghian M, Ekrami A, Jamshidi R. Transient liquid phase bonding of 304 stainless steel using a Co-based interlayer. Sci Technol Weld Joining. 2017;22:666–672. doi: 10.1080/13621718.2017.1302180
- Ye Y, Wei J, Zou G, et al. Microstructure of diffusion-brazing repaired IN738LC superalloy with uneven surface defect gap width. Sci Technol Weld Joining. 2017;22:617–626. doi: 10.1080/13621718.2017.1290338
- Ye Y, Zou G, Long W, et al. Diffusion brazing repair of IN738 superalloy with crack-like defect: microstructure and tensile properties at high temperatures. Sci Technol Weld Joining. 2019;24:52–62. doi: 10.1080/13621718.2018.1477546
- Ghasemi A, Pouranvari M. Microstructural evolution mechanism during brazing of Hastelloy X superalloy using Ni-Si–B filler metal. Sci Technol Weld Joining. 2018;23:441–448. doi: 10.1080/13621718.2017.1410341
- Riggs B, Alexandrov B, Benatar A, et al. Metallurgical characterisations of CMSX-4 vacuum-brazed with BNi-2 and BNi-9. Sci Technol Weld Joining. 2017;22:227–235. doi: 10.1080/13621718.2016.1218415
- Ruiz-Vargas J, Siredey-Schwaller N, Bocher P, et al. First melting stages during isothermal brazing, of Ni/BNi-2 couples. J Mater Process Technol. 2013;213:2074–2080. doi: 10.1016/j.jmatprotec.2013.06.008
- Gale WF, Wallach ER. Microstructural development in transient liquid-phase bonding. Metall Trans A. 1991;22:2451–2457. doi: 10.1007/BF02665011
- Zhang B, Sheng G, Jiao Y, et al. Precipitation and evolution of boride in diffusion affected zone of TLP joint of Mar-M247superalloy. J Alloys Compd. 2017;695:3202–3210. doi: 10.1016/j.jallcom.2016.11.306
- Sheng N, Hu X, Liu J, et al. M3b2 and M5B3 formation in diffusion-affected zone during Transient liquid phase bonding single-crystal superalloys. Metall Mater Trans A. 2015;46:1670–1677. doi: 10.1007/s11661-014-2733-z
- Pouranvari M, Ekrami A, Kokabi AH. Microstructure evolution mechanism during post-bond heat treatment of Transient liquid phase Bonded wrought IN718 superalloy: An approach to Fabricate boride-free joints. J Alloys Compd. 2017;723:84–91. doi: 10.1016/j.jallcom.2017.06.206
- Pouranvari M, Ekrami A, Kokabi AH. Aging response of transient liquid phase bonded wrought IN718 superalloy: Influence of post-bond heat treatment. Sci Technol Weld Joining. 2014;19:105–110. doi: 10.1179/1362171813Y.0000000170
- Pouranvari M, Ekrami A, Kokabi AH. Microstructure-properties relationship of TLP-bonded GTD-111 nickel-base superalloy. Mater Sci Eng A. 2008;490:229–234. doi: 10.1016/j.msea.2008.01.032
- Pouranvari M, Ekrami A, Kokabi AH. TLP bonding of cast IN718 nickel based superalloy: process–microstructure–strength characteristics. Mater Sci Eng A. 2013;568:76–82. doi: 10.1016/j.msea.2013.01.029
- Macdonald WD, Eagar TW. Transient liquid phase bonding. Annu Rev Mater Sci. 1992;22:23–46. doi: 10.1146/annurev.ms.22.080192.000323
- Sheng NC, Liu JD, Jin T, et al. Wide gap TLP bonding a single-crystal superalloy: evolution of the L/S interface morphology and formation of the isolated grain boundaries. Metall Mater Trans A Phys Metall Mater Sci. 2013;44:1793–1804. doi: 10.1007/s11661-012-1540-7
- Erdeniz D, Sharp KW, Dunand DC. Transient liquid-phase bonded 3D woven Ni-based superalloys. Scr Mater. 2015;108:60–63. doi: 10.1016/j.scriptamat.2015.06.016
- Philips NR, Levi CG, Evans AG. Ductile-Phase toughening of brazed joints. Metall Mater Trans A. 2009;40:1413–1421. doi: 10.1007/s11661-009-9818-0
- Ohsasa K, Narita T, Shinmura T. Numerical modeling of the transient liquid phase bonding process of Ni using Ni-B-Cr ternary filler metal. J Phase Equilibria. 1999;20:199–206. doi: 10.1361/105497199770335721
- Omori S, Koyama K, Hashimoto Y, et al. Liquidus Surface of Ni-Cr-B system. J Japan Inst Met. 1985;49:935–939. doi: 10.2320/jinstmet1952.49.11_935
- Tokunaga T, Nishio K, Ohtani H, et al. Phase equilibria in the Ni–Si–B system. Mater Trans. 2003;44:1651–1654. doi: 10.2320/matertrans.44.1651
- Lebaili S, Hamar-Thibault S. Equilibres liquide-solide dans le systeme Ni-B-Si dans la region riche en nickel. Acta Metall. 1987;35:701–710. doi: 10.1016/0001-6160(87)90194-5
- Tung SK, Lim LC, Lai MO. Microstructural evolution and control in BNi-4 brazed joints of nickel 270. Scripta Mater. 1995;33:253–1259. doi: 10.1016/0956-716X(95)00352-V
- Lebrun N, Perrot P, Serbruyns A, et al. Boron–nickel–silicon in refractory metal systems.. Berlin: Springer; 2010. p. 133–152.
- Tung SK, Lim LC, Lai MO. Solidification phenomena in nickel base brazes containing boron and silicon. Scripta Mater. 1996;34:763–769. doi: 10.1016/1359-6462(95)00577-3
- Siredey-Schwaller N, Hamel-Akré J, Peltier L, et al. Solidification sequence of Ni-Si-Cr ∼3wt% B brazing alloys. Weld World. 2017;61:1253–1265. doi: 10.1007/s40194-017-0503-4
- Ruiz-Vargas J, Siredey-Schwaller N, Gey N, et al. Microstructure development during isothermal brazing of Ni/BNi-2 couples. J Mater Process Technol. 2013;213:20–29. doi: 10.1016/j.jmatprotec.2012.07.016
- Massalski TB, editor. Binary alloy phase diagrams. Metals Park (OH): ASM; 1986.
- Cieslak MJ, Stephens JJ, Carr MJ. A study of the weldability and weld related microstructure of Cabot alloy 214. Metall Matter Trans A. 1988;19A:657–667. doi: 10.1007/BF02649280
- Dupont JN, Lippold JC, Kiser SD. Welding metallurgy and weldability of nickel alloys. Hoboken (NJ): John Wiley & Sons; 2005.
- Kolomytsev PT, Moskaleva NV, Snetkov AY. Phase composition and some properties of molybdenum-chromium-boron alloys. Sov Powder Metall Met Ceram. 1969;8:836–839. doi: 10.1007/BF00778346
- Ojo OA, Richards NL, Chaturvedi MC. Effect of gap size and process parameters on diffusion brazing of Inconel 738. Sci Technol Weld Joining. 2004;9:209–220. doi: 10.1179/136217104225012175