Role of annealing twinning in microstructural evolution of high purity silver during friction stir welding

References

• Liu HJ, Fujii H, Maeda M, et al. Tensile properties and fracture locations of friction stir welded joints of 2017-T351 aluminum alloy. J Mater Proc Tech. 2003;142:692–696. doi: 10.1016/S0924-0136(03)00806-9
   Web of Science ®Google Scholar
• Fujii H, Cui L, Tsuji N, et al. Friction stir welding of carbon steel. Mater Sci Eng A. 2006;429:50–57. doi: 10.1016/j.msea.2006.04.118
   Web of Science ®Google Scholar
• Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R. 2005;50:1–78. doi: 10.1016/j.mser.2005.07.001
   Web of Science ®Google Scholar
• Fonda RW, Bingert JF, Colligan KJ. Development of grain structure during friction stir welding. Scr Mater. 2004;51:243–248. doi: 10.1016/j.scriptamat.2004.04.017
   Web of Science ®Google Scholar
• Xie GM, Ma ZY, Geng L. Partial recrystallization in the nugget zone of friction stir welded dual-phase Cu-Zn alloy. Philos Mag. 2009;89:1505–1516. doi: 10.1080/14786430903019040
   Web of Science ®Google Scholar
• Heidarzadeh A, Saeid T, Klemm V. Microstructure, texture, and mechanical properties of friction stir welded commercial brass alloy. Mater Charact. 2016;119:84–91. doi: 10.1016/j.matchar.2016.07.009
   Web of Science ®Google Scholar
• Mironov S, Inagaki K, Sato YS, et al. Microstructural evolution of pure copper during friction-stir welding. Philos Mag. 2015;95:367–381. doi: 10.1080/14786435.2015.1006293
   Web of Science ®Google Scholar
• Prangnell PB, Heason CP. Grain structure formation during friction stir welding observed by the ‘stop action technique’. Acta Mater. 2005;53:3179–3192. doi: 10.1016/j.actamat.2005.03.044
   Web of Science ®Google Scholar
• Xu N, Ueji R, Fujii H. Enhanced mechanical properties of 70/30 brass joint by rapid cooling friction stir welding. Mater Sci Eng A. 2014;610:132–138. doi: 10.1016/j.msea.2014.05.037
   Web of Science ®Google Scholar
• Liu FC, Nelson TW. In-situ material flow pattern around probe during friction stir welding of austenitic stainless steel. Mater Des. 2016;110:354–364. doi: 10.1016/j.matdes.2016.07.147
   Web of Science ®Google Scholar
• Liu XC, Wu CS, Padhy GK. Characterization of plastic deformation and material flow in ultrasonic vibration enhanced friction stir welding. Scr Mater. 2015;102:95–98. doi: 10.1016/j.scriptamat.2015.02.022
   Web of Science ®Google Scholar
• Schmidt HNB, Dickerson TL, Hattel JH. Material flow in butt friction stir welds in AA2024-T3. Acta Mater. 2006;54:1199–1209. doi: 10.1016/j.actamat.2005.10.052
   Web of Science ®Google Scholar
• Fujii H, Chung YD, Sun YF. Friction stir welding of AISI 1080 steel using liquid CO2 for enhanced toughness and ductility. Sci Technol Weld Join. 2013;18:500–506. doi: 10.1179/1362171813Y.0000000128
   Web of Science ®Google Scholar
• Liu XC, Sun YF, Fujii H. Clarification of microstructure evolution of aluminum during friction stir welding using liquid CO2 rapid cooling. Mater Des. 2017;129:151–163. doi: 10.1016/j.matdes.2017.05.013
   Web of Science ®Google Scholar
• Liu XC, Sun YF, Morisada Y, et al. Dynamics of rotational flow in friction stir welding of aluminium alloys. J Mater Process Technol. 2018;252:643–651. doi: 10.1016/j.jmatprotec.2017.10.033
   Web of Science ®Google Scholar
• Liu XC, Sun YF, Nagira T, et al. Microstructure evolution of Cu-30Zn during friction stir welding. J Mater Sci. 2018;53:10423–10441. doi: 10.1007/s10853-018-2313-5
   Web of Science ®Google Scholar
• Humphreys J, Rohrer GS, Rollett A. Recrystallization and Related annealing Phenomena. third ed Oxford: Elsevier; 2017.
   Google Scholar
• Mironov S, Inagaki K, Sato YS, et al. Development of grain structure during friction-stir welding of Cu-30Zn brass. Philos Mag. 2014;94:3137–3148. doi: 10.1080/14786435.2014.951712
   Web of Science ®Google Scholar
• Heidarzadeh A, Saeid T, Klemm V, et al. Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys. Mater Des. 2019;162:185–197. doi: 10.1016/j.matdes.2018.11.050
   Web of Science ®Google Scholar
• Mahajan S, Pande CS, Imam MA, et al. Formation of annealing twins in f.c.c. crystals. Acta Mater. 1997;45:2633–2638. doi: 10.1016/S1359-6454(96)00336-9
   Web of Science ®Google Scholar
• Maruko T, Miyazawa T, Iwamoto Y, et al. (2014). Japan patent P2014-217836A, 2014.11.20.
   Google Scholar
• Iijima K, Ito T. (2011). Japan patent WO2011/158455, 2011.12.22.
   Google Scholar
• Metal Data Book. The Japan Institute of metals. Tokyo: Maruzen; 2004; pp. 11, 175.
   Google Scholar
• Liu XC, Sun YF, Nagira T, et al. Experimental evaluation of strain and strain rate during friction stir welding of pure copper. Sci Tech Weld Join. 2019; in press.
   Google Scholar
• Zhang F, Feng X, Yang Z, et al. Dislocation-twin boundary interactions induced nanocrystalline via SPD processing in bulk metals. Sci Rep. 2015;5:8981-1-5.
   Web of Science ®Google Scholar
• Wang YB, Wu B, Sui ML. Dynamic dislocation emission processes from twin boundaries. Appl Phys Lett. 2008;93:041906-1-3.
   Web of Science ®Google Scholar
• Haessner F, Hoschek G, Tölg G. Stored energy and recrystallization temperature of rolled copper and silver single crystals with defined solute contents. Acta Metall. 1979;27:1539–1548. doi: 10.1016/0001-6160(79)90176-7
   Google Scholar
• Hori S, Tai H, Kawaguchi S. Effect of trace elements on recrystallization temperature of silver. J Soc Mater Sci Jpn. 1981;30:556–561. doi: 10.2472/jsms.30.556
   Google Scholar
• Fonda RW, Knipling KE. Texture development in friction stir welds. Sci Technol Weld Join. 2011;16:288–294. doi: 10.1179/1362171811Y.0000000010
   Web of Science ®Google Scholar
• Li S, Beyerlein IJ, Bourke MA. Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear. Mater Sci Eng A. 2005;394:66–77. doi: 10.1016/j.msea.2004.11.032
   Web of Science ®Google Scholar
• Alvi MH, Cheong SW, Suni JP, et al. Cube texture in hot-rolled aluminum alloy 1050 (AA1050)-nucleation and growth behavior. Acta Mater. 2008;56:3098–3108. doi: 10.1016/j.actamat.2008.02.037
   Web of Science ®Google Scholar