Harnessing the scientific synergy of welding and additive manufacturing

References

• DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018;92:112–224. doi: 10.1016/j.pmatsci.2017.10.001
   Web of Science ®Google Scholar
• Standard Terminology for Additive Manufacturing Technologies, ASTM International, West Conshohocken, PA (2012) F2792-2712A.
   Google Scholar
• Mukherjee T, DebRoy T. A digital twin for rapid qualification of 3D printed metallic components. Appl Mater Today. 2019;14:59–65. doi: 10.1016/j.apmt.2018.11.003
   Web of Science ®Google Scholar
• Bhadeshia HKDH, Svensson LE, Gretoft B. A model for the development of microstructure in low-alloy steel (Fe-Mn-Si-C) weld deposits. Acta Metall. 1985;33(7):1271–1283. doi: 10.1016/0001-6160(85)90238-X
   Google Scholar
• Yang Z, Elmer JW, Wong J, et al. Evolution of titanium arc weldment macro and microstructures - modeling and real time mapping of phases. Weld J. 2000;79(4):97S–112S.
   Web of Science ®Google Scholar
• Bhadeshia HKDH, Honycombe RWK. Modelling of structure and properties, in steels: microstructure and properties. In: book authors: HKDH Bhadeshia, RWK Honycombe, editor. 4th Edition, 421–455. Oxford: Butterworth-Heinemann; 2017.
   Google Scholar
• Mishra S, DebRoy T. A heat-transfer and fluid-flow-based model to obtain a specific weld geometry using various combinations of welding variables. J Appl Phys. 2005;98(4). article number 044902. doi: 10.1063/1.2001153
   Web of Science ®Google Scholar
• De A, DebRoy T. Probing unknown welding parameters from convective heat transfer calculation and multivariable optimization. J Phys D Appl Phys. 2004;37(1):140–150. doi: 10.1088/0022-3727/37/1/023
   Web of Science ®Google Scholar
• Wei HL, Mazumder J, DebRoy T. Evolution of solidification texture during additive manufacturing. Sci Rep. 2015;5, Article number: 16446.
   Web of Science ®Google Scholar
• Antonysamy AA, Meyer J, Prangnell PB. Effect of build geometry on the beta-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting. Mater Charact. 2013;84:153–168. doi: 10.1016/j.matchar.2013.07.012
   Web of Science ®Google Scholar
• Wang T, Zhu YY, Zhang SQ, et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing. J Alloy Comp. 2015;636:505–513. doi: 10.1016/j.jallcom.2015.01.256
   Google Scholar
• Elmer JW, Gibbs G. The Effect of Atmosphere on the composition of wire Arc additive Manufactured metal components. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.
   Google Scholar
• Zhang S, Zhang Y, Gao M, et al. Effects of milling thickness on wire deposition accuracy of hybrid additive/ subtractive manufacturing. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1595925.
   Google Scholar
• Kuo C-H, Sridharan N, Han T, et al. Ultrasonic additive manufacturing of 4130 steel using Ni interlayers. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1607486
   Google Scholar
• Khan K, De A. Modelling of selective laser melting process with Adaptive remeshing. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1575057.
   Google Scholar
• Hu R, Luo M, Liu T, et al. Thermal fluid dynamics of liquid bridge transfer in laser wire deposition 3D printing. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1591039.
   Google Scholar
• Mukherjee T, DebRoy T. Printability of 316 stainless steel. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1607061
   Web of Science ®Google Scholar
• Li W, Cao C, Wang G, et al. ‘Cold spray +’ as a new hybrid additive manufacturing technology: a literature review. Sci Technol Weld Joining. 2019;24. DOI: 10.1080/13621718.2019.1603851.
   Google Scholar
• Faria GA, Kadirvel K, Hinojos A, et al. On the use of Metastable Interface Equilibrium Assumptions on prediction of solidification micro-segregation in laser powder Bed fusion. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1608406
   Google Scholar
• Wang M, Wang Q, Lin X, et al. Microstructure and mechanical property of laser solid formed 30CrMnSiNi2A ultra-high strength steel. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1592359.
   Google Scholar
• Carlton HD, Klein KD, Elmer JW. Evolution of microstructure and mechanical properties of selective laser Melted Ti-5Al-5V-5Mo-3Cr after Isothermal heat Treatments. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1594589.
   Google Scholar
• Cai X, Dong B, Bai J, et al. Effects of post-deposition heat treatment on microstructures of GTA-additive Manufactured 2219-Al. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1580440.
   Google Scholar
• Wu B, Pan Z, Chen G, et al. Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1580439. doi: 10.1080/13621718.2018.1492776
   Google Scholar
• Marinelli G, Martina F, Ganguly S, et al. Functionally graded structures of refractory metals by wire arc additive manufacturing. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1586162.
   Google Scholar
• Zhang X, Chen Y, Liou F. Microstructure and mechanical properties of SS316L-IN625 functionally graded materials fabricated by directed energy deposition. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1589086.
   Google Scholar
• Wang K, Du D, Liu G, et al. Microstructure and properties of WC reinforced Ni-based composite coatings with Y2O3 addition on titanium alloy by laser cladding. Sci Technol Weld Join. 2019;24. DOI: 10.1080/13621718.2019.1580441.
   Google Scholar
• Zuback JS, Palmer TA, DebRoy T. Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys. J Alloy Comp. 2019;770:995–1003. doi: 10.1016/j.jallcom.2018.08.197
   Web of Science ®Google Scholar