Observation and analysis of metal transfer phenomena for high-current super-TIG welding process

References

• Unnikrishnakurup S, Rouquette S, Soulié F, et al. Estimation of the heat flux parameters: application to GTA static welding spot. Design and Optimization Symposium; 2013.
   Google Scholar
• Delgado-Álvareza A, Mendez PF, Ramírez-Argáeza MA. Dimensionless representation of the column characteristics and weld pool interactions for a DC argon arc. Sci Technol Weld Join. 2019: 1–10. DOI:10.1080/13621718.2019.1584455.
   Web of Science ®Google Scholar
• Lin ML, Eager TW. Pressures produced by gas tungsten arcs. Metall Trans B. 1986;17:601–607. doi: 10.1007/BF02670227
   Web of Science ®Google Scholar
• Savage WF, Nippes EF, Agusa K. Effect of arc force on defect formation in GTA welding. Weld Res Suppl. 1979;58(7):212–224.
   Web of Science ®Google Scholar
• Oh DS, Kim YS, Cho SM. Derivation of current density distribution by arc pressure measurement in GTA welding. Sci Technol Weld Join. 2005;10:442–446. doi: 10.1179/174329305X44116
   Web of Science ®Google Scholar
• Kumar A, Debroy T. Toward a unified model to prevent humping defects in gas tungsten arc welding. Weld J. 2006;85(12):292–304.
   Web of Science ®Google Scholar
• Blecher JJ, Palmer TA, Debroy T. Mitigation of root defect in laser and hybrid laser-arc welding. Weld J. 2015;3:73-s–82-s.
   Google Scholar
• Wei HL, Knapp GL, Mukherjee T, et al. Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718. Addit Manuf. 2019;25:448–459. doi: 10.1016/j.addma.2018.11.028
   Web of Science ®Google Scholar
• El-Batahgy A-M, DebRoy T. Nd-YAG laser beam and GTA welding of Ti-6Al-4V alloy. Int J Eng Technol Res. 2014;2(12):43–50.
   Google Scholar
• Kumar A, DebRoy T. Neural network model of heat and fluid flow in gas metal arc fillet welding based on genetic algorithm and conjugate gradient optimisation. Sci Technol Weld Join. 2006;11(1):106–119. doi: 10.1179/174329306X84319
   Web of Science ®Google Scholar
• Kumar A, Zhang W, Kim CH, et al. Mathematical modelling of weld phenomena 7’, Graz, Austria (ed. H. Cerjak, H. K. D. H. Bhadeshia and E. Kozeschnik), 1–35;2005, London, Maney Publishing.
   Google Scholar
• Egerland S, Colegrove P, Williams S. Investigation of low current gas tungsten arc welding using split anode calorimetry. Sci Technol Weld Join. 2017;22(1):71–78. doi: 10.1080/13621718.2016.1189214
   Web of Science ®Google Scholar
• Mingxuan Y, Ling L, Bojin Q, et al. Arc force and shapes with high-frequency pulsed-arc welding. Sci Technol Weld Join. 2017;22(7):580–586. doi: 10.1080/13621718.2016.1277625
   Web of Science ®Google Scholar
• Zhang W, Elmer JW, DebRoy T. Integrated modeling of thermal cycles, austenite formation, grain growth and decomposition in the heat affected zone of carbon steel. Sci Technol Weld Join. 2005;10(5):574–582. doi: 10.1179/174329305X48365
   Web of Science ®Google Scholar
• Dutra JC, Cirino LM, Silva RHGE. AC–GTAW of aluminum–a new perspective for evaluation of the role of positive polarity time. Sci. Technol. Weld. Join. 2010;15(7):632–637. doi: 10.1179/136217110X12813393169570
   Web of Science ®Google Scholar
• Campbell SW, Galloway AM, McPherson NA. Arc pressure and fluid flow during alternating shielding gases. Part 2: arc force determination, Sci. Technol. Weld. Join. 2013;18(7):597–602. doi: 10.1179/1362171813Y.0000000141
   Web of Science ®Google Scholar
• Nomura K, Ogino Y, Hirata Y. Shape control of TIG arc plasma by cusp type magnetic field with permanent magnets. Q. J. Jpn. Weld. Soc. 2009;27(3):170–175. doi: 10.2207/qjjws.27.170
   Google Scholar
• Hori K, Watanabe H, Myoga T, et al. Development of hot wire TIG welding methods using pulsed current to heat filler wire-research on pulse heated hot wire TIG welding processes. Weld. Int. 2004;18:456–468. doi: 10.1533/wint.2004.3281
   Google Scholar
• Oh D-S, Kim Y-S, Cho S-M. The characteristics of arc pressure distribution of TIG welding with shield gas mixing ratio. J KWS. 2005b;23:41–47.
   Google Scholar
• Sun QJ, Lin SB, Yang CL, et al. Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas welding’. Sci Technol Weld Join. 2009;14(8):765–767. doi: 10.1179/136217109X12505932584772
   Web of Science ®Google Scholar
• Yamauchi N, Taka T. TIG arc welding with hollow tungsten electrode. IIW, doc. no, 212-452-79.
   Google Scholar
• Leng XS, Zhang GJ, Wu L. Experimental study on improving welding efficiency of twin electrode TIG welding method. Sci Technol Weld Join. 2006;11(5):550–554. doi: 10.1179/174329306X122785
   Web of Science ®Google Scholar
• Cho S-M, Oh D-S, Ham H-S, et al. Filler metal for TIG welding. U.S. Patent Application 14/912,899, filed July 14, 2016.
   Google Scholar
• Park J-H, Kim Y-H, Baek H-J, et al. A study on process development of super-TIG welding for 9% nickel steel with alloy 625. J Manuf Process. 2019;40:140–148. doi: 10.1016/j.jmapro.2019.03.017
   Web of Science ®Google Scholar
• Stephan E, Johannes Z, Roland B, et al. Advanced gas tungsten arc weld surfacing current status and application. Soldag. & Inspeção. 2015;20:300–314. doi: 10.1590/0104-9224/SI2003.05
   Web of Science ®Google Scholar