References
- Shahmiri H, Movahedi M, Kokabi AH. Friction stir lap joining of aluminium alloy to polypropylene sheets. Sci Technol Weld Join. 2017;22(2):120–126. doi: 10.1080/13621718.2016.1204171
- Arenas JM, Alía C, Narbón JJ, et al. Considerations for the industrial application of structural adhesive joints in the aluminium-composite material bonding. Compos Part B Eng. 2013;44:417–423. doi: 10.1016/j.compositesb.2012.04.026
- Kabche JP, Caccese V, Berube KA, et al. Experimental characterization of hybrid composite-to-metal bolted joints under flexural loading. Compos Part B Eng. 2007;38:66–78. doi: 10.1016/j.compositesb.2006.03.013
- Kumar SB, Sridhar I, Sivashanker S, et al. Tensile failure of adhesively bonded CFRP composite scarf joints. Mater Sci Eng B Solid-State Mater Adv Technol. 2006;132:113–120. doi: 10.1016/j.mseb.2006.02.046
- Yang J, Yu Z, Li Y, et al. Laser welding/brazing of 5182 aluminium alloy to ZEK100 magnesium alloy using a nickel interlayer. Sci Technol Weld Join. 2018;6:1–8. doi: 10.1080/13621718.2017.1314657
- Shen Z, Ding Y, Gerlich AP. Advances in friction stir spot welding. Crit Rev Solid State Mater Sci. 2019: 1–78. doi:10.1080/10408436.2019.1671799.
- Chen J, Zhang H, Zhang P, et al. The Zn accumulation behavior, phase evolution and void formation in Sn-xZn/Cu systems by considering trace Zn: a combined experimental and theoretical study. J Mater Res Technol. 2019;8(5):4141–4150. doi: 10.1016/j.jmrt.2019.07.023
- Liu F, Liao J, Nakata K. Joining of metal to plastic using friction lap welding. Mater Des. 2014;54:236–244. doi: 10.1016/j.matdes.2013.08.056
- Chen G, Li H, Wang G, et al. Effects of pin thread on the in-process material flow behavior during friction stir welding: A computational fluid dynamics study. Int J Mach Tool Manuf. 2018;124:12–21. doi: 10.1016/j.ijmachtools.2017.09.002
- Okada T, Uchida S, Nakata K. Effect of anodizing on direct joining properties of aluminium alloy and plastic sheets by friction lap joining. Weld Int. 2018;32:85–94. doi: 10.1080/09507116.2017.1346893
- Nagatsuka K, Onoda T, Okada T, et al. Direct dissimilar joining of aluminium alloys and polyamide 6 by friction lap joining. Weld Int. 2017;31(1):9–16. doi: 10.1080/09507116.2016.1223185
- Nagatsuka K, Yoshida S, Tsuchiya A, et al. Direct joining of carbon-fiber-reinforced plastic to an aluminum alloy using friction lap joining. Compos Part B Eng. 2015;73:82–88. doi: 10.1016/j.compositesb.2014.12.029
- Wu L, Nagatsuka K, Nakata K. Direct joining of oxygen-free copper and carbon-fiber-reinforced plastic by friction lap joining. J Mater Sci Technol. 2018;34(01):192–197. doi: 10.1016/j.jmst.2017.10.019
- Füllbrandt M, Kesal D, von Klitzing R. Multiscaling Approach for Non-destructive adhesion studies of metal/polymer composites. ACS Appl Mater Interfaces. 2015;7:16247–16256. doi: 10.1021/acsami.5b01949
- Wang Q, Zhang S, Liu G, et al. The mixture of silver nanowires and nanosilver-coated copper micronflakes for electrically conductive adhesives to achieve high electrical conductivity with low percolation threshold. J Alloy Compd. 2019;820. doi:10.1016/j.jallcom.2019.153184.
- Chen G, Feng Z, Chen J, et al. Analytical approach for describing the collapse of surface asperities under compressive stress during rapid solid state bonding. Scripta Materialia. 2017;128:41–44. doi: 10.1016/j.scriptamat.2016.10.015