References
- Pollock TM. Weight loss with magnesium alloys. Science. 2010;328(5981):986–987. doi: 10.1126/science.1182848
- Kim N. Critical Assessment 6: magnesium sheet alloys: viable alternatives to steels? Mater Sci Technol. 2014;30(15):1925–1928. doi: 10.1179/1743284714Y.0000000596
- Yuan T, Luo Z, Kou S. Mechanism of grain refining in AZ91 Mg welds by arc oscillation. Sci Technol Weld Joining. 2017;22(2):97–103. doi: 10.1080/13621718.2016.1199127
- Liu K, Kou S. Susceptibility of magnesium alloys to solidification cracking. Sci Technol Weld Joining. 2019: 1–7. doi: 10.1080/13621718.2018.1467847
- Chai X, Yuan T, Kou S. Liquation and liquation cracking in partially melted zones of magnesium welds. Weld J. 2016;95:57s.
- Yuan T, Yu Z, Wang X, et al. Effect of intermetallics on susceptibility of Mg alloy welds to liquation cracking. Sci Technol Weld Joining. 2020: 1–7.
- Kou S. Welding metallurgy. Hoboken (NJ), 2003. p. 431–446.
- Yuan T, Chai X, Luo Z, et al. Predicting susceptibility of magnesium alloys to weld-edge cracking. Acta Mater. 2015;90:242–251. doi: 10.1016/j.actamat.2015.02.031
- Huang C, Kou S. Partially melted zone in aluminum welds – solute segregation and mechanical behavior. Weld J. 2001;80(1):9–17.
- Yang Z, Yan H, Chen J, et al. Microstructural characterisation and liquation behaviour of laser welded joint of fine grained AZ91 magnesium alloy thin sheets. Sci Technol Weld Joining. 2015;20(1):27–34. doi: 10.1179/1362171814Y.0000000252
- Chen X, Yan H, Chen J, et al. Effects of grain size and precipitation on liquation cracking of AZ61 magnesium alloy laser welding joints. Sci Technol Weld Joining. 2013;18(6):458–465. doi: 10.1179/1362171813Y.0000000117
- Lin C-M, Tsai H-L, Lee C-L, et al. Evolution of microstructures and properties of magnesium alloy weldments produced with CO2 laser process. Mater Sci Eng: A. 2012;548:12–18. doi: 10.1016/j.msea.2012.03.033
- Min D, Shen J, Lai S, et al. Effect of heat input on the microstructure and mechanical properties of tungsten inert gas arc butt-welded AZ61 magnesium alloy plates. Mater Charact. 2009;60(12):1583–1590. doi: 10.1016/j.matchar.2009.09.010
- Coelho R, Kostka A, Pinto H, et al. Microstructure and mechanical properties of magnesium alloy AZ31B laser beam welds. Mater Sci Eng: A. 2008;485(1-2):20–30. doi: 10.1016/j.msea.2007.07.073
- Chowdhury S, Chen D, Bhole S, et al. Microstructure and mechanical properties of fiber-laser-welded and diode-laser-welded AZ31 magnesium alloy. Metall Mater Trans A. 2011;42(7):1974–1989. doi: 10.1007/s11661-010-0574-y
- Munitz A, Cotler C, Stern A, et al. Mechanical properties and microstructure of gas tungsten arc welded magnesium AZ91D plates. Mater Sci Eng: A. 2001;302(1):68–73. doi: 10.1016/S0921-5093(00)01356-3
- Zhou W, Long T, Mark C. Hot cracking in tungsten inert gas welding of magnesium alloy AZ91D. Mater Sci Technol. 2007;23(11):1294–1299. doi: 10.1179/174328407X213026
- Dahle AK, Lee YC, Nave MD, et al. Development of the as-cast microstructure in magnesium–aluminium alloys. J Light Met. 2001;1(1):61–72. doi: 10.1016/S1471-5317(00)00007-9
- Mousavizade SM, Ghaini FM, Torkamany MJ, et al. Effect of severe plastic deformation on grain boundary liquation of a nickel-base superalloy. Scr Mater. 2009;60:244–247. doi: 10.1016/j.scriptamat.2008.10.021