References
- Lu H, Shi L, Dong H, et al. Influence of flame rectification on mechanical properties of AlZnMg alloy. J Alloy Compd. 2016;689:278–286.
- Puydt Q, Flouriot S, Ringeval S, et al. Relationship between microstructure, strength, and fracture in an Al-Zn-Mg electron beam weld: part II: mechanical characterization and modeling. Metall Mater Trans A. 2014;45:6141–6152.
- Khotiyan SK, Kumar S. Investigation of microstructure and mechanical properties of TIG and MIG welding using aluminium alloy. Int J Educ Res. 2014;5:90–96.
- Çetkin E, Çelik YH, Temiz Ş. Effect of welding parameters on microstructure and mechanical properties of AA7075/AA5182 alloys joined by TIG and MIG welding methods. J Braz Soc Mech Sci. 2020;42:34.
- Miyasaka F, Okuda T, Ohji T. Effect of current wave-form on AC TIG welding of aluminium alloys. Weld Inter. 2005;19:370–374.
- Temmar M, Hadji M, Sahraoui T. Effect of post-weld aging treatment on mechanical properties of Tungsten Inert Gas welded low thickness 7075 aluminium alloy joints. Mater Des. 2011;32:3532–3536.
- Fortain JM, Gadrey S. How to select a suitable shielding gas to improve the performance of MIG and TIG welding of aluminium alloys. Weld Inter. 2013;27:936–947.
- Ericsson M, Sandström R. Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG. Int J Fatigue. 2003;25:1379–1387.
- Wang Q, Chen H, Qiu P, et al. Residual stress and fatigue strength of hybrid laser-MIG-welded A7N01P-T4. Metall Mater Trans B. 2017;48(1):591–601.
- Ema M. Tensile strength of MIG-welded 7000 series aluminium alloy extrusions. Weld Inter. 2008;22:661–668.
- Ishak M, Salleh MNM, Aisha SR. The mechanical and microstructural study of welded AA7075 using different filler metals. Int J Comp Meth-Sing. 2017;5:696–712.
- Ma Z, Li Q, Ma L, et al. Fatigue behavior of MIG-welded 7N01-T4 aluminum alloy with different V-groove angles. Arch Metall Mater. 2019;64:1577–1584.
- Weiyuan N, Shanglei Y, Jin J, et al. Fatigue property of Al-5Zn-2Mg aluminum alloy welding joints used in high-speed trains. Rare Metal Mat Eng. 2016;45:2774–2778.
- Balasubramanian V, Ravisankar V, Reddy GM. Influences of pulsed current welding and post weld aging treatment on fatigue crack growth behaviour of AA7075 aluminium alloy joints. Int J Fatigue. 2008;30:405–416.
- Ghosh PK, Gupta SR, Gupta PC, et al. Fatigue characteristics of pulsed MIG welded Al-Zn-Mg alloy. J Mater Sci. 1991;26:6161–6170.
- Gao ZT. Applied statistics in fatigue. Beijing: National Defence Industry Press; 1986.
- Partanen T, Niemi E. Hot spot SN curves based on fatigue tests of small MIG-welded aluminium specimens. Weld World. 1999;43:16–22.